mtd: nand: gpmi: rely on generic DT parsing done in nand_scan_ident()

The core now takes care of parsing generic DT properties in
nand_scan_ident() when nand_set_flash_node() has been called.
Rely on this initialization instead of calling of_get_nand_xxx()
manually.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Han xu <han.xu@nxp.com>

drivers/mtd/nand/gpmi-nand/gpmi-nand.c

@@ -25,7 +25,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_mtd.h>
 #include "gpmi-nand.h"
 #include "bch-regs.h"
 
@@ -1944,16 +1943,6 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	/* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
 	this->swap_block_mark = !GPMI_IS_MX23(this);
 
-	if (of_get_nand_on_flash_bbt(this->dev->of_node)) {
-		chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
-
-		if (of_property_read_bool(this->dev->of_node,
-						"fsl,no-blockmark-swap"))
-			this->swap_block_mark = false;
-	}
-	dev_dbg(this->dev, "Blockmark swapping %sabled\n",
-		this->swap_block_mark ? "en" : "dis");
-
 	/*
 	 * Allocate a temporary DMA buffer for reading ID in the
 	 * nand_scan_ident().
@@ -1968,6 +1957,16 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	if (ret)
 		goto err_out;
 
+	if (chip->bbt_options & NAND_BBT_USE_FLASH) {
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+		if (of_property_read_bool(this->dev->of_node,
+						"fsl,no-blockmark-swap"))
+			this->swap_block_mark = false;
+	}
+	dev_dbg(this->dev, "Blockmark swapping %sabled\n",
+		this->swap_block_mark ? "en" : "dis");
+
 	ret = gpmi_init_last(this);
 	if (ret)
 		goto err_out;