Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

Pull arch/tile updates from Chris Metcalf:
 "These changes provide support for PCIe root complex and USB host mode
  for tilegx's on-chip I/Os.

  In addition, this pull provides the required underpinning for the
  on-chip networking support that was pulled into 3.5.  The changes have
  all been through LKML (with several rounds for PCIe RC) and on
  linux-next."

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: updates to pci root complex from community feedback
  bounce: allow use of bounce pool via config option
  usb: add host support for the tilegx architecture
  arch/tile: provide kernel support for the tilegx USB shim
  tile pci: enable IOMMU to support DMA for legacy devices
  arch/tile: enable ZONE_DMA for tilegx
  tilegx pci: support I/O to arbitrarily-cached pages
  tile: remove unused header
  arch/tile: tilegx PCI root complex support
  arch/tile: provide kernel support for the tilegx TRIO shim
  arch/tile: break out the "csum a long" function to <asm/checksum.h>
  arch/tile: provide kernel support for the tilegx mPIPE shim
  arch/tile: common DMA code for the GXIO IORPC subsystem
  arch/tile: support MMIO-based readb/writeb etc.
  arch/tile: introduce GXIO IORPC framework for tilegx

arch/tile/Kconfig

@@ -3,6 +3,8 @@
 
 config TILE
 	def_bool y
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_API_DEBUG
 	select HAVE_KVM if !TILEGX
 	select GENERIC_FIND_FIRST_BIT
 	select USE_GENERIC_SMP_HELPERS
@@ -79,6 +81,9 @@ config ARCH_DMA_ADDR_T_64BIT
 config NEED_DMA_MAP_STATE
 	def_bool y
 
+config ARCH_HAS_DMA_SET_COHERENT_MASK
+	bool
+
 config LOCKDEP_SUPPORT
 	def_bool y
 
@@ -212,6 +217,22 @@ config HIGHMEM
 
 	  If unsure, say "true".
 
+config ZONE_DMA
+	def_bool y
+
+config IOMMU_HELPER
+	bool
+
+config NEED_SG_DMA_LENGTH
+	bool
+
+config SWIOTLB
+	bool
+	default TILEGX
+	select IOMMU_HELPER
+	select NEED_SG_DMA_LENGTH
+	select ARCH_HAS_DMA_SET_COHERENT_MASK
+
 # We do not currently support disabling NUMA.
 config NUMA
 	bool # "NUMA Memory Allocation and Scheduler Support"
@@ -345,6 +366,8 @@ config KERNEL_PL
 	  kernel will be built to run at.  Generally you should use
 	  the default value here.
 
+source "arch/tile/gxio/Kconfig"
+
 endmenu  # Tilera-specific configuration
 
 menu "Bus options"
@@ -354,6 +377,9 @@ config PCI
 	default y
 	select PCI_DOMAINS
 	select GENERIC_PCI_IOMAP
+	select TILE_GXIO_TRIO if TILEGX
+	select ARCH_SUPPORTS_MSI if TILEGX
+	select PCI_MSI if TILEGX
 	---help---
 	  Enable PCI root complex support, so PCIe endpoint devices can
 	  be attached to the Tile chip.  Many, but not all, PCI devices
@@ -370,6 +396,22 @@ config NO_IOPORT
 
 source "drivers/pci/Kconfig"
 
+config TILE_USB
+	tristate "Tilera USB host adapter support"
+	default y
+	depends on USB
+	depends on TILEGX
+	select TILE_GXIO_USB_HOST
+	---help---
+	  Provides USB host adapter support for the built-in EHCI and OHCI
+	  interfaces on TILE-Gx chips.
+
+# USB OHCI needs the bounce pool since tilegx will often have more
+# than 4GB of memory, but we don't currently use the IOTLB to present
+# a 32-bit address to OHCI.  So we need to use a bounce pool instead.
+config NEED_BOUNCE_POOL
+	def_bool USB_OHCI_HCD
+
 config HOTPLUG
 	bool "Support for hot-pluggable devices"
 	---help---

arch/tile/Makefile

@@ -59,6 +59,8 @@ libs-y		+= $(LIBGCC_PATH)
 # See arch/tile/Kbuild for content of core part of the kernel
 core-y		+= arch/tile/
 
+core-$(CONFIG_TILE_GXIO) += arch/tile/gxio/
+
 ifdef TILERA_ROOT
 INSTALL_PATH ?= $(TILERA_ROOT)/tile/boot
 endif

arch/tile/gxio/Kconfig

+# Support direct access to TILE-Gx hardware from user space, via the
+# gxio library, or from kernel space, via kernel IORPC support.
+config TILE_GXIO
+	bool
+	depends on TILEGX
+
+# Support direct access to the common I/O DMA facility within the
+# TILE-Gx mPIPE and Trio hardware from kernel space.
+config TILE_GXIO_DMA
+	bool
+	select TILE_GXIO
+
+# Support direct access to the TILE-Gx mPIPE hardware from kernel space.
+config TILE_GXIO_MPIPE
+	bool
+	select TILE_GXIO
+	select TILE_GXIO_DMA
+
+# Support direct access to the TILE-Gx TRIO hardware from kernel space.
+config TILE_GXIO_TRIO
+	bool
+	select TILE_GXIO
+	select TILE_GXIO_DMA
+
+# Support direct access to the TILE-Gx USB hardware from kernel space.
+config TILE_GXIO_USB_HOST
+	bool
+	select TILE_GXIO

arch/tile/gxio/Makefile

+#
+# Makefile for the Tile-Gx device access support.
+#
+
+obj-$(CONFIG_TILE_GXIO) += iorpc_globals.o kiorpc.o
+obj-$(CONFIG_TILE_GXIO_DMA) += dma_queue.o
+obj-$(CONFIG_TILE_GXIO_MPIPE) += mpipe.o iorpc_mpipe.o iorpc_mpipe_info.o
+obj-$(CONFIG_TILE_GXIO_TRIO) += trio.o iorpc_trio.o
+obj-$(CONFIG_TILE_GXIO_USB_HOST) += usb_host.o iorpc_usb_host.o

arch/tile/gxio/dma_queue.c

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/io.h>
+#include <linux/atomic.h>
+#include <linux/module.h>
+#include <gxio/dma_queue.h>
+
+/* Wait for a memory read to complete. */
+#define wait_for_value(val)                             \
+  __asm__ __volatile__("move %0, %0" :: "r"(val))
+
+/* The index is in the low 16. */
+#define DMA_QUEUE_INDEX_MASK ((1 << 16) - 1)
+
+/*
+ * The hardware descriptor-ring type.
+ * This matches the types used by mpipe (MPIPE_EDMA_POST_REGION_VAL_t)
+ * and trio (TRIO_PUSH_DMA_REGION_VAL_t or TRIO_PULL_DMA_REGION_VAL_t).
+ * See those types for more documentation on the individual fields.
+ */
+typedef union {
+	struct {
+#ifndef __BIG_ENDIAN__
+		uint64_t ring_idx:16;
+		uint64_t count:16;
+		uint64_t gen:1;
+		uint64_t __reserved:31;
+#else
+		uint64_t __reserved:31;
+		uint64_t gen:1;
+		uint64_t count:16;
+		uint64_t ring_idx:16;
+#endif
+	};
+	uint64_t word;
+} __gxio_ring_t;
+
+void __gxio_dma_queue_init(__gxio_dma_queue_t *dma_queue,
+			   void *post_region_addr, unsigned int num_entries)
+{
+	/*
+	 * Limit 65536 entry rings to 65535 credits because we only have a
+	 * 16 bit completion counter.
+	 */
+	int64_t credits = (num_entries < 65536) ? num_entries : 65535;
+
+	memset(dma_queue, 0, sizeof(*dma_queue));
+
+	dma_queue->post_region_addr = post_region_addr;
+	dma_queue->hw_complete_count = 0;
+	dma_queue->credits_and_next_index = credits << DMA_QUEUE_CREDIT_SHIFT;
+}
+
+EXPORT_SYMBOL_GPL(__gxio_dma_queue_init);
+
+void __gxio_dma_queue_update_credits(__gxio_dma_queue_t *dma_queue)
+{
+	__gxio_ring_t val;
+	uint64_t count;
+	uint64_t delta;
+	uint64_t new_count;
+
+	/*
+	 * Read the 64-bit completion count without touching the cache, so
+	 * we later avoid having to evict any sharers of this cache line
+	 * when we update it below.
+	 */
+	uint64_t orig_hw_complete_count =
+		cmpxchg(&dma_queue->hw_complete_count,
+			-1, -1);
+
+	/* Make sure the load completes before we access the hardware. */
+	wait_for_value(orig_hw_complete_count);
+
+	/* Read the 16-bit count of how many packets it has completed. */
+	val.word = __gxio_mmio_read(dma_queue->post_region_addr);
+	count = val.count;
+
+	/*
+	 * Calculate the number of completions since we last updated the
+	 * 64-bit counter.  It's safe to ignore the high bits because the
+	 * maximum credit value is 65535.
+	 */
+	delta = (count - orig_hw_complete_count) & 0xffff;
+	if (delta == 0)
+		return;
+
+	/*
+	 * Try to write back the count, advanced by delta.  If we race with
+	 * another thread, this might fail, in which case we return
+	 * immediately on the assumption that some credits are (or at least
+	 * were) available.
+	 */
+	new_count = orig_hw_complete_count + delta;
+	if (cmpxchg(&dma_queue->hw_complete_count,
+		    orig_hw_complete_count,
+		    new_count) != orig_hw_complete_count)
+		return;
+
+	/*
+	 * We succeeded in advancing the completion count; add back the
+	 * corresponding number of egress credits.
+	 */
+	__insn_fetchadd(&dma_queue->credits_and_next_index,
+			(delta << DMA_QUEUE_CREDIT_SHIFT));
+}
+
+EXPORT_SYMBOL_GPL(__gxio_dma_queue_update_credits);
+
+/*
+ * A separate 'blocked' method for put() so that backtraces and
+ * profiles will clearly indicate that we're wasting time spinning on
+ * egress availability rather than actually posting commands.
+ */
+int64_t __gxio_dma_queue_wait_for_credits(__gxio_dma_queue_t *dma_queue,
+					  int64_t modifier)
+{
+	int backoff = 16;
+	int64_t old;
+
+	do {
+		int i;
+		/* Back off to avoid spamming memory networks. */
+		for (i = backoff; i > 0; i--)
+			__insn_mfspr(SPR_PASS);
+
+		/* Check credits again. */
+		__gxio_dma_queue_update_credits(dma_queue);
+		old = __insn_fetchaddgez(&dma_queue->credits_and_next_index,
+					 modifier);
+
+		/* Calculate bounded exponential backoff for next iteration. */
+		if (backoff < 256)
+			backoff *= 2;
+	} while (old + modifier < 0);
+
+	return old;
+}
+
+EXPORT_SYMBOL_GPL(__gxio_dma_queue_wait_for_credits);
+
+int64_t __gxio_dma_queue_reserve_aux(__gxio_dma_queue_t *dma_queue,
+				     unsigned int num, int wait)
+{
+	return __gxio_dma_queue_reserve(dma_queue, num, wait != 0, true);
+}
+
+EXPORT_SYMBOL_GPL(__gxio_dma_queue_reserve_aux);
+
+int __gxio_dma_queue_is_complete(__gxio_dma_queue_t *dma_queue,
+				 int64_t completion_slot, int update)
+{
+	if (update) {
+		if (ACCESS_ONCE(dma_queue->hw_complete_count) >
+		    completion_slot)
+			return 1;
+
+		__gxio_dma_queue_update_credits(dma_queue);
+	}
+
+	return ACCESS_ONCE(dma_queue->hw_complete_count) > completion_slot;
+}
+
+EXPORT_SYMBOL_GPL(__gxio_dma_queue_is_complete);

arch/tile/gxio/iorpc_globals.c

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+#include "gxio/iorpc_globals.h"
+
+struct arm_pollfd_param {
+	union iorpc_pollfd pollfd;
+};
+
+int __iorpc_arm_pollfd(int fd, int pollfd_cookie)
+{
+	struct arm_pollfd_param temp;
+	struct arm_pollfd_param *params = &temp;
+
+	params->pollfd.kernel.cookie = pollfd_cookie;
+
+	return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params),
+			     IORPC_OP_ARM_POLLFD);
+}
+
+EXPORT_SYMBOL(__iorpc_arm_pollfd);
+
+struct close_pollfd_param {
+	union iorpc_pollfd pollfd;
+};
+
+int __iorpc_close_pollfd(int fd, int pollfd_cookie)
+{
+	struct close_pollfd_param temp;
+	struct close_pollfd_param *params = &temp;
+
+	params->pollfd.kernel.cookie = pollfd_cookie;
+
+	return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params),
+			     IORPC_OP_CLOSE_POLLFD);
+}
+
+EXPORT_SYMBOL(__iorpc_close_pollfd);
+
+struct get_mmio_base_param {
+	HV_PTE base;
+};
+
+int __iorpc_get_mmio_base(int fd, HV_PTE *base)
+{
+	int __result;
+	struct get_mmio_base_param temp;
+	struct get_mmio_base_param *params = &temp;
+
+	__result =
+	    hv_dev_pread(fd, 0, (HV_VirtAddr) params, sizeof(*params),
+			 IORPC_OP_GET_MMIO_BASE);
+	*base = params->base;
+
+	return __result;
+}
+
+EXPORT_SYMBOL(__iorpc_get_mmio_base);
+
+struct check_mmio_offset_param {
+	unsigned long offset;
+	unsigned long size;
+};
+
+int __iorpc_check_mmio_offset(int fd, unsigned long offset, unsigned long size)
+{
+	struct check_mmio_offset_param temp;
+	struct check_mmio_offset_param *params = &temp;
+
+	params->offset = offset;
+	params->size = size;
+
+	return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params),
+			     IORPC_OP_CHECK_MMIO_OFFSET);
+}
+
+EXPORT_SYMBOL(__iorpc_check_mmio_offset);

arch/tile/gxio/iorpc_mpipe_info.c

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+#include "gxio/iorpc_mpipe_info.h"
+
+
+struct enumerate_aux_param {
+	_gxio_mpipe_link_name_t name;
+	_gxio_mpipe_link_mac_t mac;
+};
+
+int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context,
+				  unsigned int idx,
+				  _gxio_mpipe_link_name_t * name,
+				  _gxio_mpipe_link_mac_t * mac)
+{
+	int __result;
+	struct enumerate_aux_param temp;
+	struct enumerate_aux_param *params = &temp;
+
+	__result =
+	    hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params),
+			 (((uint64_t) idx << 32) |
+			  GXIO_MPIPE_INFO_OP_ENUMERATE_AUX));
+	*name = params->name;
+	*mac = params->mac;
+
+	return __result;
+}
+
+EXPORT_SYMBOL(gxio_mpipe_info_enumerate_aux);
+
+struct get_mmio_base_param {
+	HV_PTE base;
+};
+
+int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t * context,
+				  HV_PTE *base)
+{
+	int __result;
+	struct get_mmio_base_param temp;
+	struct get_mmio_base_param *params = &temp;
+
+	__result =
+	    hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params),
+			 GXIO_MPIPE_INFO_OP_GET_MMIO_BASE);
+	*base = params->base;
+
+	return __result;
+}
+
+EXPORT_SYMBOL(gxio_mpipe_info_get_mmio_base);
+
+struct check_mmio_offset_param {
+	unsigned long offset;
+	unsigned long size;
+};
+
+int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t * context,
+				      unsigned long offset, unsigned long size)
+{
+	struct check_mmio_offset_param temp;
+	struct check_mmio_offset_param *params = &temp;
+
+	params->offset = offset;
+	params->size = size;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params),
+			     GXIO_MPIPE_INFO_OP_CHECK_MMIO_OFFSET);
+}
+
+EXPORT_SYMBOL(gxio_mpipe_info_check_mmio_offset);

arch/tile/gxio/iorpc_trio.c

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+#include "gxio/iorpc_trio.h"
+
+struct alloc_asids_param {
+	unsigned int count;
+	unsigned int first;
+	unsigned int flags;
+};
+
+int gxio_trio_alloc_asids(gxio_trio_context_t * context, unsigned int count,
+			  unsigned int first, unsigned int flags)
+{
+	struct alloc_asids_param temp;
+	struct alloc_asids_param *params = &temp;
+
+	params->count = count;
+	params->first = first;
+	params->flags = flags;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_TRIO_OP_ALLOC_ASIDS);
+}
+
+EXPORT_SYMBOL(gxio_trio_alloc_asids);
+
+
+struct alloc_memory_maps_param {
+	unsigned int count;
+	unsigned int first;
+	unsigned int flags;
+};
+
+int gxio_trio_alloc_memory_maps(gxio_trio_context_t * context,
+				unsigned int count, unsigned int first,
+				unsigned int flags)
+{
+	struct alloc_memory_maps_param temp;
+	struct alloc_memory_maps_param *params = &temp;
+
+	params->count = count;
+	params->first = first;
+	params->flags = flags;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_TRIO_OP_ALLOC_MEMORY_MAPS);
+}
+
+EXPORT_SYMBOL(gxio_trio_alloc_memory_maps);
+
+
+struct alloc_pio_regions_param {
+	unsigned int count;
+	unsigned int first;
+	unsigned int flags;
+};
+
+int gxio_trio_alloc_pio_regions(gxio_trio_context_t * context,
+				unsigned int count, unsigned int first,
+				unsigned int flags)
+{
+	struct alloc_pio_regions_param temp;
+	struct alloc_pio_regions_param *params = &temp;
+
+	params->count = count;
+	params->first = first;
+	params->flags = flags;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_TRIO_OP_ALLOC_PIO_REGIONS);
+}
+
+EXPORT_SYMBOL(gxio_trio_alloc_pio_regions);
+
+struct init_pio_region_aux_param {
+	unsigned int pio_region;
+	unsigned int mac;
+	uint32_t bus_address_hi;
+	unsigned int flags;
+};
+
+int gxio_trio_init_pio_region_aux(gxio_trio_context_t * context,
+				  unsigned int pio_region, unsigned int mac,
+				  uint32_t bus_address_hi, unsigned int flags)
+{
+	struct init_pio_region_aux_param temp;
+	struct init_pio_region_aux_param *params = &temp;
+
+	params->pio_region = pio_region;
+	params->mac = mac;
+	params->bus_address_hi = bus_address_hi;
+	params->flags = flags;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_TRIO_OP_INIT_PIO_REGION_AUX);
+}
+
+EXPORT_SYMBOL(gxio_trio_init_pio_region_aux);
+
+
+struct init_memory_map_mmu_aux_param {
+	unsigned int map;
+	unsigned long va;
+	uint64_t size;
+	unsigned int asid;
+	unsigned int mac;
+	uint64_t bus_address;
+	unsigned int node;
+	unsigned int order_mode;
+};
+
+int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t * context,
+				      unsigned int map, unsigned long va,
+				      uint64_t size, unsigned int asid,
+				      unsigned int mac, uint64_t bus_address,
+				      unsigned int node,
+				      unsigned int order_mode)
+{
+	struct init_memory_map_mmu_aux_param temp;
+	struct init_memory_map_mmu_aux_param *params = &temp;
+
+	params->map = map;
+	params->va = va;
+	params->size = size;
+	params->asid = asid;
+	params->mac = mac;
+	params->bus_address = bus_address;
+	params->node = node;
+	params->order_mode = order_mode;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params),
+			     GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX);
+}
+
+EXPORT_SYMBOL(gxio_trio_init_memory_map_mmu_aux);
+
+struct get_port_property_param {
+	struct pcie_trio_ports_property trio_ports;
+};
+
+int gxio_trio_get_port_property(gxio_trio_context_t * context,
+				struct pcie_trio_ports_property *trio_ports)
+{
+	int __result;
+	struct get_port_property_param temp;
+	struct get_port_property_param *params = &temp;
+
+	__result =
+	    hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params),
+			 GXIO_TRIO_OP_GET_PORT_PROPERTY);
+	*trio_ports = params->trio_ports;
+
+	return __result;
+}
+
+EXPORT_SYMBOL(gxio_trio_get_port_property);
+
+struct config_legacy_intr_param {
+	union iorpc_interrupt interrupt;
+	unsigned int mac;
+	unsigned int intx;
+};
+
+int gxio_trio_config_legacy_intr(gxio_trio_context_t * context, int inter_x,
+				 int inter_y, int inter_ipi, int inter_event,
+				 unsigned int mac, unsigned int intx)
+{
+	struct config_legacy_intr_param temp;
+	struct config_legacy_intr_param *params = &temp;
+
+	params->interrupt.kernel.x = inter_x;
+	params->interrupt.kernel.y = inter_y;
+	params->interrupt.kernel.ipi = inter_ipi;
+	params->interrupt.kernel.event = inter_event;
+	params->mac = mac;
+	params->intx = intx;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_TRIO_OP_CONFIG_LEGACY_INTR);
+}
+
+EXPORT_SYMBOL(gxio_trio_config_legacy_intr);
+
+struct config_msi_intr_param {
+	union iorpc_interrupt interrupt;
+	unsigned int mac;
+	unsigned int mem_map;
+	uint64_t mem_map_base;
+	uint64_t mem_map_limit;
+	unsigned int asid;
+};
+
+int gxio_trio_config_msi_intr(gxio_trio_context_t * context, int inter_x,
+			      int inter_y, int inter_ipi, int inter_event,
+			      unsigned int mac, unsigned int mem_map,
+			      uint64_t mem_map_base, uint64_t mem_map_limit,
+			      unsigned int asid)
+{
+	struct config_msi_intr_param temp;
+	struct config_msi_intr_param *params = &temp;
+
+	params->interrupt.kernel.x = inter_x;
+	params->interrupt.kernel.y = inter_y;
+	params->interrupt.kernel.ipi = inter_ipi;
+	params->interrupt.kernel.event = inter_event;
+	params->mac = mac;
+	params->mem_map = mem_map;
+	params->mem_map_base = mem_map_base;
+	params->mem_map_limit = mem_map_limit;
+	params->asid = asid;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_TRIO_OP_CONFIG_MSI_INTR);
+}
+
+EXPORT_SYMBOL(gxio_trio_config_msi_intr);
+
+
+struct set_mps_mrs_param {
+	uint16_t mps;
+	uint16_t mrs;
+	unsigned int mac;
+};
+
+int gxio_trio_set_mps_mrs(gxio_trio_context_t * context, uint16_t mps,
+			  uint16_t mrs, unsigned int mac)
+{
+	struct set_mps_mrs_param temp;
+	struct set_mps_mrs_param *params = &temp;
+
+	params->mps = mps;
+	params->mrs = mrs;
+	params->mac = mac;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_TRIO_OP_SET_MPS_MRS);
+}
+
+EXPORT_SYMBOL(gxio_trio_set_mps_mrs);
+
+struct force_rc_link_up_param {
+	unsigned int mac;
+};
+
+int gxio_trio_force_rc_link_up(gxio_trio_context_t * context, unsigned int mac)
+{
+	struct force_rc_link_up_param temp;
+	struct force_rc_link_up_param *params = &temp;
+
+	params->mac = mac;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_TRIO_OP_FORCE_RC_LINK_UP);
+}
+
+EXPORT_SYMBOL(gxio_trio_force_rc_link_up);
+
+struct force_ep_link_up_param {
+	unsigned int mac;
+};
+
+int gxio_trio_force_ep_link_up(gxio_trio_context_t * context, unsigned int mac)
+{
+	struct force_ep_link_up_param temp;
+	struct force_ep_link_up_param *params = &temp;
+
+	params->mac = mac;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_TRIO_OP_FORCE_EP_LINK_UP);
+}
+
+EXPORT_SYMBOL(gxio_trio_force_ep_link_up);
+
+struct get_mmio_base_param {
+	HV_PTE base;
+};
+
+int gxio_trio_get_mmio_base(gxio_trio_context_t * context, HV_PTE *base)
+{
+	int __result;
+	struct get_mmio_base_param temp;
+	struct get_mmio_base_param *params = &temp;
+
+	__result =
+	    hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params),
+			 GXIO_TRIO_OP_GET_MMIO_BASE);
+	*base = params->base;
+
+	return __result;
+}
+
+EXPORT_SYMBOL(gxio_trio_get_mmio_base);
+
+struct check_mmio_offset_param {
+	unsigned long offset;
+	unsigned long size;
+};
+
+int gxio_trio_check_mmio_offset(gxio_trio_context_t * context,
+				unsigned long offset, unsigned long size)
+{
+	struct check_mmio_offset_param temp;
+	struct check_mmio_offset_param *params = &temp;
+
+	params->offset = offset;
+	params->size = size;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_TRIO_OP_CHECK_MMIO_OFFSET);
+}
+
+EXPORT_SYMBOL(gxio_trio_check_mmio_offset);

arch/tile/gxio/iorpc_usb_host.c

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+#include "gxio/iorpc_usb_host.h"
+
+struct cfg_interrupt_param {
+	union iorpc_interrupt interrupt;
+};
+
+int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t * context, int inter_x,
+				int inter_y, int inter_ipi, int inter_event)
+{
+	struct cfg_interrupt_param temp;
+	struct cfg_interrupt_param *params = &temp;
+
+	params->interrupt.kernel.x = inter_x;
+	params->interrupt.kernel.y = inter_y;
+	params->interrupt.kernel.ipi = inter_ipi;
+	params->interrupt.kernel.event = inter_event;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_USB_HOST_OP_CFG_INTERRUPT);
+}
+
+EXPORT_SYMBOL(gxio_usb_host_cfg_interrupt);
+
+struct register_client_memory_param {
+	HV_PTE pte;
+	unsigned int flags;
+};
+
+int gxio_usb_host_register_client_memory(gxio_usb_host_context_t * context,
+					 HV_PTE pte, unsigned int flags)
+{
+	struct register_client_memory_param temp;
+	struct register_client_memory_param *params = &temp;
+
+	params->pte = pte;
+	params->flags = flags;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params),
+			     GXIO_USB_HOST_OP_REGISTER_CLIENT_MEMORY);
+}
+
+EXPORT_SYMBOL(gxio_usb_host_register_client_memory);
+
+struct get_mmio_base_param {
+	HV_PTE base;
+};
+
+int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t * context, HV_PTE *base)
+{
+	int __result;
+	struct get_mmio_base_param temp;
+	struct get_mmio_base_param *params = &temp;
+
+	__result =
+	    hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params),
+			 GXIO_USB_HOST_OP_GET_MMIO_BASE);
+	*base = params->base;
+
+	return __result;
+}
+
+EXPORT_SYMBOL(gxio_usb_host_get_mmio_base);
+
+struct check_mmio_offset_param {
+	unsigned long offset;
+	unsigned long size;
+};
+
+int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t * context,
+				    unsigned long offset, unsigned long size)
+{
+	struct check_mmio_offset_param temp;
+	struct check_mmio_offset_param *params = &temp;
+
+	params->offset = offset;
+	params->size = size;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params),
+			     GXIO_USB_HOST_OP_CHECK_MMIO_OFFSET);
+}
+
+EXPORT_SYMBOL(gxio_usb_host_check_mmio_offset);

arch/tile/gxio/kiorpc.c

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * TILE-Gx IORPC support for kernel I/O drivers.
+ */
+
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <gxio/iorpc_globals.h>
+#include <gxio/kiorpc.h>
+
+#ifdef DEBUG_IORPC
+#define TRACE(FMT, ...) pr_info(SIMPLE_MSG_LINE FMT, ## __VA_ARGS__)
+#else
+#define TRACE(...)
+#endif
+
+/* Create kernel-VA-space MMIO mapping for an on-chip IO device. */
+void __iomem *iorpc_ioremap(int hv_fd, resource_size_t offset,
+			    unsigned long size)
+{
+	pgprot_t mmio_base, prot = { 0 };
+	unsigned long pfn;
+	int err;
+
+	/* Look up the shim's lotar and base PA. */
+	err = __iorpc_get_mmio_base(hv_fd, &mmio_base);
+	if (err) {
+		TRACE("get_mmio_base() failure: %d\n", err);
+		return NULL;
+	}
+
+	/* Make sure the HV driver approves of our offset and size. */
+	err = __iorpc_check_mmio_offset(hv_fd, offset, size);
+	if (err) {
+		TRACE("check_mmio_offset() failure: %d\n", err);
+		return NULL;
+	}
+
+	/*
+	 * mmio_base contains a base pfn and homing coordinates.  Turn
+	 * it into an MMIO pgprot and offset pfn.
+	 */
+	prot = hv_pte_set_lotar(prot, hv_pte_get_lotar(mmio_base));
+	pfn = pte_pfn(mmio_base) + PFN_DOWN(offset);
+
+	return ioremap_prot(PFN_PHYS(pfn), size, prot);
+}
+
+EXPORT_SYMBOL(iorpc_ioremap);

arch/tile/gxio/trio.c

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/*
+ * Implementation of trio gxio calls.
+ */
+
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <gxio/trio.h>
+#include <gxio/iorpc_globals.h>
+#include <gxio/iorpc_trio.h>
+#include <gxio/kiorpc.h>
+
+int gxio_trio_init(gxio_trio_context_t *context, unsigned int trio_index)
+{
+	char file[32];
+	int fd;
+
+	snprintf(file, sizeof(file), "trio/%d/iorpc", trio_index);
+	fd = hv_dev_open((HV_VirtAddr) file, 0);
+	if (fd < 0) {
+		context->fd = -1;
+
+		if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX)
+			return fd;
+		else
+			return -ENODEV;
+	}
+
+	context->fd = fd;
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(gxio_trio_init);

arch/tile/gxio/usb_host.c

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/*
+ *
+ * Implementation of USB gxio calls.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+#include <gxio/iorpc_globals.h>
+#include <gxio/iorpc_usb_host.h>
+#include <gxio/kiorpc.h>
+#include <gxio/usb_host.h>
+
+int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index,
+		       int is_ehci)
+{
+	char file[32];
+	int fd;
+
+	if (is_ehci)
+		snprintf(file, sizeof(file), "usb_host/%d/iorpc/ehci",
+			 usb_index);
+	else
+		snprintf(file, sizeof(file), "usb_host/%d/iorpc/ohci",
+			 usb_index);
+
+	fd = hv_dev_open((HV_VirtAddr) file, 0);
+	if (fd < 0) {
+		if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX)
+			return fd;
+		else
+			return -ENODEV;
+	}
+
+	context->fd = fd;
+
+	// Map in the MMIO space.
+	context->mmio_base =
+		(void __force *)iorpc_ioremap(fd, 0, HV_USB_HOST_MMIO_SIZE);
+
+	if (context->mmio_base == NULL) {
+		hv_dev_close(context->fd);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(gxio_usb_host_init);
+
+int gxio_usb_host_destroy(gxio_usb_host_context_t * context)
+{
+	iounmap((void __force __iomem *)(context->mmio_base));
+	hv_dev_close(context->fd);
+
+	context->mmio_base = NULL;
+	context->fd = -1;
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(gxio_usb_host_destroy);
+
+void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t * context)
+{
+	return context->mmio_base;
+}
+
+EXPORT_SYMBOL_GPL(gxio_usb_host_get_reg_start);
+
+size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t * context)
+{
+	return HV_USB_HOST_MMIO_SIZE;
+}
+
+EXPORT_SYMBOL_GPL(gxio_usb_host_get_reg_len);

arch/tile/include/arch/mpipe_constants.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+
+#ifndef __ARCH_MPIPE_CONSTANTS_H__
+#define __ARCH_MPIPE_CONSTANTS_H__
+
+#define MPIPE_NUM_CLASSIFIERS 10
+#define MPIPE_CLS_MHZ 1200
+
+#define MPIPE_NUM_EDMA_RINGS 32
+
+#define MPIPE_NUM_SGMII_MACS 16
+#define MPIPE_NUM_XAUI_MACS 4
+#define MPIPE_NUM_LOOPBACK_CHANNELS 4
+#define MPIPE_NUM_NON_LB_CHANNELS 28
+
+#define MPIPE_NUM_IPKT_BLOCKS 1536
+
+#define MPIPE_NUM_BUCKETS 4160
+
+#define MPIPE_NUM_NOTIF_RINGS 256
+
+#define MPIPE_NUM_NOTIF_GROUPS 32
+
+#define MPIPE_NUM_TLBS_PER_ASID 16
+#define MPIPE_TLB_IDX_WIDTH 4
+
+#define MPIPE_MMIO_NUM_SVC_DOM 32
+
+#endif /* __ARCH_MPIPE_CONSTANTS_H__ */

arch/tile/include/arch/mpipe_def.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_MPIPE_DEF_H__
+#define __ARCH_MPIPE_DEF_H__
+#define MPIPE_MMIO_ADDR__REGION_SHIFT 26
+#define MPIPE_MMIO_ADDR__REGION_VAL_CFG 0x0
+#define MPIPE_MMIO_ADDR__REGION_VAL_IDMA 0x4
+#define MPIPE_MMIO_ADDR__REGION_VAL_EDMA 0x5
+#define MPIPE_MMIO_ADDR__REGION_VAL_BSM 0x6
+#define MPIPE_BSM_REGION_VAL__VA_SHIFT 7
+#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_128 0x0
+#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_256 0x1
+#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_512 0x2
+#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_1024 0x3
+#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_1664 0x4
+#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_4096 0x5
+#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_10368 0x6
+#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_16384 0x7
+#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_DFA 0x0
+#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_FIXED 0x1
+#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_ALWAYS_PICK 0x2
+#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_STICKY 0x3
+#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_STICKY_RAND 0x7
+#define MPIPE_LBL_NR_STATE__FIRST_WORD 0x2138
+#endif /* !defined(__ARCH_MPIPE_DEF_H__) */

arch/tile/include/arch/mpipe_shm_def.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_MPIPE_SHM_DEF_H__
+#define __ARCH_MPIPE_SHM_DEF_H__
+#define MPIPE_EDMA_DESC_WORD1__C_VAL_UNCHAINED 0x0
+#define MPIPE_EDMA_DESC_WORD1__C_VAL_CHAINED 0x1
+#define MPIPE_EDMA_DESC_WORD1__C_VAL_NOT_RDY 0x2
+#define MPIPE_EDMA_DESC_WORD1__C_VAL_INVALID 0x3
+#endif /* !defined(__ARCH_MPIPE_SHM_DEF_H__) */

arch/tile/include/arch/trio.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_TRIO_H__
+#define __ARCH_TRIO_H__
+
+#include <arch/abi.h>
+#include <arch/trio_def.h>
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Tile PIO Region Configuration - CFG Address Format.
+ * This register describes the address format for PIO accesses when the
+ * associated region is setup with TYPE=CFG.
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /* Register Address (full byte address). */
+    uint_reg_t reg_addr     : 12;
+    /* Function Number */
+    uint_reg_t fn           : 3;
+    /* Device Number */
+    uint_reg_t dev          : 5;
+    /* BUS Number */
+    uint_reg_t bus          : 8;
+    /* Config Type: 0 for access to directly-attached device.  1 otherwise. */
+    uint_reg_t type         : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_0 : 1;
+    /*
+     * MAC select.  This must match the configuration in
+     * TILE_PIO_REGION_SETUP.MAC.
+     */
+    uint_reg_t mac          : 2;
+    /* Reserved. */
+    uint_reg_t __reserved_1 : 32;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_1 : 32;
+    uint_reg_t mac          : 2;
+    uint_reg_t __reserved_0 : 1;
+    uint_reg_t type         : 1;
+    uint_reg_t bus          : 8;
+    uint_reg_t dev          : 5;
+    uint_reg_t fn           : 3;
+    uint_reg_t reg_addr     : 12;
+#endif
+  };
+
+  uint_reg_t word;
+} TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t;
+#endif /* !defined(__ASSEMBLER__) */
+
+#endif /* !defined(__ARCH_TRIO_H__) */

arch/tile/include/arch/trio_constants.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+
+#ifndef __ARCH_TRIO_CONSTANTS_H__
+#define __ARCH_TRIO_CONSTANTS_H__
+
+#define TRIO_NUM_ASIDS 16
+#define TRIO_NUM_TLBS_PER_ASID 16
+
+#define TRIO_NUM_TPIO_REGIONS 8
+#define TRIO_LOG2_NUM_TPIO_REGIONS 3
+
+#define TRIO_NUM_MAP_MEM_REGIONS 16
+#define TRIO_LOG2_NUM_MAP_MEM_REGIONS 4
+#define TRIO_NUM_MAP_SQ_REGIONS 8
+#define TRIO_LOG2_NUM_MAP_SQ_REGIONS 3
+
+#define TRIO_LOG2_NUM_SQ_FIFO_ENTRIES 6
+
+#define TRIO_NUM_PUSH_DMA_RINGS 32
+
+#define TRIO_NUM_PULL_DMA_RINGS 32
+
+#endif /* __ARCH_TRIO_CONSTANTS_H__ */

arch/tile/include/arch/trio_def.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_TRIO_DEF_H__
+#define __ARCH_TRIO_DEF_H__
+#define TRIO_CFG_REGION_ADDR__REG_SHIFT 0
+#define TRIO_CFG_REGION_ADDR__INTFC_SHIFT 16
+#define TRIO_CFG_REGION_ADDR__INTFC_VAL_TRIO 0x0
+#define TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE 0x1
+#define TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD 0x2
+#define TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED 0x3
+#define TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT 18
+#define TRIO_CFG_REGION_ADDR__PROT_SHIFT 20
+#define TRIO_PIO_REGIONS_ADDR__REGION_SHIFT 32
+#define TRIO_MAP_MEM_REG_INT0 0x1000000000
+#define TRIO_MAP_MEM_REG_INT1 0x1000000008
+#define TRIO_MAP_MEM_REG_INT2 0x1000000010
+#define TRIO_MAP_MEM_REG_INT3 0x1000000018
+#define TRIO_MAP_MEM_REG_INT4 0x1000000020
+#define TRIO_MAP_MEM_REG_INT5 0x1000000028
+#define TRIO_MAP_MEM_REG_INT6 0x1000000030
+#define TRIO_MAP_MEM_REG_INT7 0x1000000038
+#define TRIO_MAP_MEM_LIM__ADDR_SHIFT 12
+#define TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_UNORDERED 0x0
+#define TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_STRICT 0x1
+#define TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_REL_ORD 0x2
+#define TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT 30
+#endif /* !defined(__ARCH_TRIO_DEF_H__) */

arch/tile/include/arch/trio_pcie_intfc.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_TRIO_PCIE_INTFC_H__
+#define __ARCH_TRIO_PCIE_INTFC_H__
+
+#include <arch/abi.h>
+#include <arch/trio_pcie_intfc_def.h>
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Port Configuration.
+ * Configuration of the PCIe Port
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /* Provides the state of the strapping pins for this port. */
+    uint_reg_t strap_state      : 3;
+    /* Reserved. */
+    uint_reg_t __reserved_0     : 1;
+    /*
+     * When 1, the device type will be overridden using OVD_DEV_TYPE_VAL.
+     * When 0, the device type is determined based on the STRAP_STATE.
+     */
+    uint_reg_t ovd_dev_type     : 1;
+    /* Provides the device type when OVD_DEV_TYPE is 1. */
+    uint_reg_t ovd_dev_type_val : 4;
+    /* Determines how link is trained. */
+    uint_reg_t train_mode       : 2;
+    /* Reserved. */
+    uint_reg_t __reserved_1     : 1;
+    /*
+     * For PCIe, used to flip physical RX lanes that were not properly wired.
+     *  This is not the same as lane reversal which is handled automatically
+     * during link training.  When 0, RX Lane0 must be wired to the link
+     * partner (either to its Lane0 or it's LaneN).  When RX_LANE_FLIP is 1,
+     * the highest numbered lane for this port becomes Lane0 and Lane0 does
+     * NOT have to be wired to the link partner.
+     */
+    uint_reg_t rx_lane_flip     : 1;
+    /*
+     * For PCIe, used to flip physical TX lanes that were not properly wired.
+     *  This is not the same as lane reversal which is handled automatically
+     * during link training.  When 0, TX Lane0 must be wired to the link
+     * partner (either to its Lane0 or it's LaneN).  When TX_LANE_FLIP is 1,
+     * the highest numbered lane for this port becomes Lane0 and Lane0 does
+     * NOT have to be wired to the link partner.
+     */
+    uint_reg_t tx_lane_flip     : 1;
+    /*
+     * For StreamIO port, configures the width of the port when TRAIN_MODE is
+     * not STRAP.
+     */
+    uint_reg_t stream_width     : 2;
+    /*
+     * For StreamIO port, configures the rate of the port when TRAIN_MODE is
+     * not STRAP.
+     */
+    uint_reg_t stream_rate      : 2;
+    /* Reserved. */
+    uint_reg_t __reserved_2     : 46;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_2     : 46;
+    uint_reg_t stream_rate      : 2;
+    uint_reg_t stream_width     : 2;
+    uint_reg_t tx_lane_flip     : 1;
+    uint_reg_t rx_lane_flip     : 1;
+    uint_reg_t __reserved_1     : 1;
+    uint_reg_t train_mode       : 2;
+    uint_reg_t ovd_dev_type_val : 4;
+    uint_reg_t ovd_dev_type     : 1;
+    uint_reg_t __reserved_0     : 1;
+    uint_reg_t strap_state      : 3;
+#endif
+  };
+
+  uint_reg_t word;
+} TRIO_PCIE_INTFC_PORT_CONFIG_t;
+
+/*
+ * Port Status.
+ * Status of the PCIe Port.  This register applies to the StreamIO port when
+ * StreamIO is enabled.
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /*
+     * Indicates the DL state of the port.  When 1, the port is up and ready
+     * to receive traffic.
+     */
+    uint_reg_t dl_up        : 1;
+    /*
+     * Indicates the number of times the link has gone down.  Clears on read.
+     */
+    uint_reg_t dl_down_cnt  : 7;
+    /* Indicates the SERDES PLL has spun up and is providing a valid clock. */
+    uint_reg_t clock_ready  : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_0 : 7;
+    /* Device revision ID. */
+    uint_reg_t device_rev   : 8;
+    /* Link state (PCIe). */
+    uint_reg_t ltssm_state  : 6;
+    /* Link power management state (PCIe). */
+    uint_reg_t pm_state     : 3;
+    /* Reserved. */
+    uint_reg_t __reserved_1 : 31;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_1 : 31;
+    uint_reg_t pm_state     : 3;
+    uint_reg_t ltssm_state  : 6;
+    uint_reg_t device_rev   : 8;
+    uint_reg_t __reserved_0 : 7;
+    uint_reg_t clock_ready  : 1;
+    uint_reg_t dl_down_cnt  : 7;
+    uint_reg_t dl_up        : 1;
+#endif
+  };
+
+  uint_reg_t word;
+} TRIO_PCIE_INTFC_PORT_STATUS_t;
+
+/*
+ * Transmit FIFO Control.
+ * Contains TX FIFO thresholds.  These registers are for diagnostics purposes
+ * only.  Changing these values causes undefined behavior.
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /*
+     * Almost-Empty level for TX0 data.  Typically set to at least
+     * roundup(38.0*M/N) where N=tclk frequency and M=MAC symbol rate in MHz
+     * for a x4 port (250MHz).
+     */
+    uint_reg_t tx0_data_ae_lvl : 7;
+    /* Reserved. */
+    uint_reg_t __reserved_0    : 1;
+    /* Almost-Empty level for TX1 data. */
+    uint_reg_t tx1_data_ae_lvl : 7;
+    /* Reserved. */
+    uint_reg_t __reserved_1    : 1;
+    /* Almost-Full level for TX0 data. */
+    uint_reg_t tx0_data_af_lvl : 7;
+    /* Reserved. */
+    uint_reg_t __reserved_2    : 1;
+    /* Almost-Full level for TX1 data. */
+    uint_reg_t tx1_data_af_lvl : 7;
+    /* Reserved. */
+    uint_reg_t __reserved_3    : 1;
+    /* Almost-Full level for TX0 info. */
+    uint_reg_t tx0_info_af_lvl : 5;
+    /* Reserved. */
+    uint_reg_t __reserved_4    : 3;
+    /* Almost-Full level for TX1 info. */
+    uint_reg_t tx1_info_af_lvl : 5;
+    /* Reserved. */
+    uint_reg_t __reserved_5    : 3;
+    /*
+     * This register provides performance adjustment for high bandwidth
+     * flows.  The MAC will assert almost-full to TRIO if non-posted credits
+     * fall below this level.  Note that setting this larger than the initial
+     * PORT_CREDIT.NPH value will cause READS to never be sent.  If the
+     * initial credit value from the link partner is smaller than this value
+     * when the link comes up, the value will be reset to the initial credit
+     * value to prevent lockup.
+     */
+    uint_reg_t min_np_credits  : 8;
+    /*
+     * This register provides performance adjustment for high bandwidth
+     * flows.  The MAC will assert almost-full to TRIO if posted credits fall
+     * below this level.  Note that setting this larger than the initial
+     * PORT_CREDIT.PH value will cause WRITES to never be sent.  If the
+     * initial credit value from the link partner is smaller than this value
+     * when the link comes up, the value will be reset to the initial credit
+     * value to prevent lockup.
+     */
+    uint_reg_t min_p_credits   : 8;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t min_p_credits   : 8;
+    uint_reg_t min_np_credits  : 8;
+    uint_reg_t __reserved_5    : 3;
+    uint_reg_t tx1_info_af_lvl : 5;
+    uint_reg_t __reserved_4    : 3;
+    uint_reg_t tx0_info_af_lvl : 5;
+    uint_reg_t __reserved_3    : 1;
+    uint_reg_t tx1_data_af_lvl : 7;
+    uint_reg_t __reserved_2    : 1;
+    uint_reg_t tx0_data_af_lvl : 7;
+    uint_reg_t __reserved_1    : 1;
+    uint_reg_t tx1_data_ae_lvl : 7;
+    uint_reg_t __reserved_0    : 1;
+    uint_reg_t tx0_data_ae_lvl : 7;
+#endif
+  };
+
+  uint_reg_t word;
+} TRIO_PCIE_INTFC_TX_FIFO_CTL_t;
+#endif /* !defined(__ASSEMBLER__) */
+
+#endif /* !defined(__ARCH_TRIO_PCIE_INTFC_H__) */

arch/tile/include/arch/trio_pcie_intfc_def.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_TRIO_PCIE_INTFC_DEF_H__
+#define __ARCH_TRIO_PCIE_INTFC_DEF_H__
+#define TRIO_PCIE_INTFC_MAC_INT_STS 0x0000
+#define TRIO_PCIE_INTFC_MAC_INT_STS__INT_LEVEL_MASK  0xf000
+#define TRIO_PCIE_INTFC_PORT_CONFIG 0x0018
+#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_DISABLED 0x0
+#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT 0x1
+#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC 0x2
+#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1 0x3
+#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1 0x4
+#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_XLINK 0x5
+#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_STREAM_X1 0x6
+#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_STREAM_X4 0x7
+#define TRIO_PCIE_INTFC_PORT_STATUS 0x0020
+#define TRIO_PCIE_INTFC_TX_FIFO_CTL 0x0050
+#endif /* !defined(__ARCH_TRIO_PCIE_INTFC_DEF_H__) */

arch/tile/include/arch/trio_pcie_rc.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_TRIO_PCIE_RC_H__
+#define __ARCH_TRIO_PCIE_RC_H__
+
+#include <arch/abi.h>
+#include <arch/trio_pcie_rc_def.h>
+
+#ifndef __ASSEMBLER__
+
+/* Device Capabilities Register. */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /*
+     * Max_Payload_Size Supported, writablethrough the MAC_STANDARD interface
+     */
+    uint_reg_t mps_sup                    : 3;
+    /*
+     * This field is writable through the MAC_STANDARD interface.  However,
+     * Phantom Function is not  supported. Therefore, the application must
+     * not write any value other than 0x0 to this  field.
+     */
+    uint_reg_t phantom_function_supported : 2;
+    /* This bit is writable through the MAC_STANDARD interface. */
+    uint_reg_t ext_tag_field_supported    : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_0               : 3;
+    /* Endpoint L1 Acceptable Latency Must be 0x0 for non-Endpoint devices. */
+    uint_reg_t l1_lat                     : 3;
+    /*
+     * Undefined since PCI Express 1.1 (Was Attention Button Present for PCI
+     * Express 1.0a)
+     */
+    uint_reg_t r1                         : 1;
+    /*
+     * Undefined since PCI Express 1.1 (Was Attention Indicator Present for
+     * PCI  Express 1.0a)
+     */
+    uint_reg_t r2                         : 1;
+    /*
+     * Undefined since PCI Express 1.1 (Was Power Indicator Present for PCI
+     * Express 1.0a)
+     */
+    uint_reg_t r3                         : 1;
+    /*
+     * Role-Based Error Reporting, writable through the MAC_STANDARD
+     * interface.  Required to be set for device compliant to 1.1  spec and
+     * later.
+     */
+    uint_reg_t rer                        : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_1               : 2;
+    /* Captured Slot Power Limit Value Upstream port only. */
+    uint_reg_t slot_pwr_lim               : 8;
+    /* Captured Slot Power Limit Scale Upstream port only. */
+    uint_reg_t slot_pwr_scale             : 2;
+    /* Reserved. */
+    uint_reg_t __reserved_2               : 4;
+    /* Endpoint L0s Acceptable LatencyMust be 0x0 for non-Endpoint devices. */
+    uint_reg_t l0s_lat                    : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_3               : 31;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_3               : 31;
+    uint_reg_t l0s_lat                    : 1;
+    uint_reg_t __reserved_2               : 4;
+    uint_reg_t slot_pwr_scale             : 2;
+    uint_reg_t slot_pwr_lim               : 8;
+    uint_reg_t __reserved_1               : 2;
+    uint_reg_t rer                        : 1;
+    uint_reg_t r3                         : 1;
+    uint_reg_t r2                         : 1;
+    uint_reg_t r1                         : 1;
+    uint_reg_t l1_lat                     : 3;
+    uint_reg_t __reserved_0               : 3;
+    uint_reg_t ext_tag_field_supported    : 1;
+    uint_reg_t phantom_function_supported : 2;
+    uint_reg_t mps_sup                    : 3;
+#endif
+  };
+
+  uint_reg_t word;
+} TRIO_PCIE_RC_DEVICE_CAP_t;
+
+/* Device Control Register. */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /* Correctable Error Reporting Enable */
+    uint_reg_t cor_err_ena      : 1;
+    /* Non-Fatal Error Reporting Enable */
+    uint_reg_t nf_err_ena       : 1;
+    /* Fatal Error Reporting Enable */
+    uint_reg_t fatal_err_ena    : 1;
+    /* Unsupported Request Reporting Enable */
+    uint_reg_t ur_ena           : 1;
+    /* Relaxed orderring enable */
+    uint_reg_t ro_ena           : 1;
+    /* Max Payload Size */
+    uint_reg_t max_payload_size : 3;
+    /* Extended Tag Field Enable */
+    uint_reg_t ext_tag          : 1;
+    /* Phantom Function Enable */
+    uint_reg_t ph_fn_ena        : 1;
+    /* AUX Power PM Enable */
+    uint_reg_t aux_pm_ena       : 1;
+    /* Enable NoSnoop */
+    uint_reg_t no_snoop         : 1;
+    /* Max read request size */
+    uint_reg_t max_read_req_sz  : 3;
+    /* Reserved. */
+    uint_reg_t __reserved       : 49;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved       : 49;
+    uint_reg_t max_read_req_sz  : 3;
+    uint_reg_t no_snoop         : 1;
+    uint_reg_t aux_pm_ena       : 1;
+    uint_reg_t ph_fn_ena        : 1;
+    uint_reg_t ext_tag          : 1;
+    uint_reg_t max_payload_size : 3;
+    uint_reg_t ro_ena           : 1;
+    uint_reg_t ur_ena           : 1;
+    uint_reg_t fatal_err_ena    : 1;
+    uint_reg_t nf_err_ena       : 1;
+    uint_reg_t cor_err_ena      : 1;
+#endif
+  };
+
+  uint_reg_t word;
+} TRIO_PCIE_RC_DEVICE_CONTROL_t;
+#endif /* !defined(__ASSEMBLER__) */
+
+#endif /* !defined(__ARCH_TRIO_PCIE_RC_H__) */

arch/tile/include/arch/trio_pcie_rc_def.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_TRIO_PCIE_RC_DEF_H__
+#define __ARCH_TRIO_PCIE_RC_DEF_H__
+#define TRIO_PCIE_RC_DEVICE_CAP 0x0074
+#define TRIO_PCIE_RC_DEVICE_CONTROL 0x0078
+#define TRIO_PCIE_RC_DEVICE_ID_VEN_ID 0x0000
+#define TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT 16
+#define TRIO_PCIE_RC_REVISION_ID 0x0008
+#endif /* !defined(__ARCH_TRIO_PCIE_RC_DEF_H__) */

arch/tile/include/arch/trio_shm.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+
+#ifndef __ARCH_TRIO_SHM_H__
+#define __ARCH_TRIO_SHM_H__
+
+#include <arch/abi.h>
+#include <arch/trio_shm_def.h>
+
+#ifndef __ASSEMBLER__
+/**
+ * TRIO DMA Descriptor.
+ * The TRIO DMA descriptor is written by software and consumed by hardware.
+ * It is used to specify the location of transaction data in the IO and Tile
+ * domains.
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+    /* Word 0 */
+
+#ifndef __BIG_ENDIAN__
+    /** Tile side virtual address. */
+    int_reg_t va           : 42;
+    /**
+     * Encoded size of buffer used on push DMA when C=1:
+     * 0 = 128 bytes
+     * 1 = 256 bytes
+     * 2 = 512 bytes
+     * 3 = 1024 bytes
+     * 4 = 1664 bytes
+     * 5 = 4096 bytes
+     * 6 = 10368 bytes
+     * 7 = 16384 bytes
+     */
+    uint_reg_t bsz          : 3;
+    /**
+     * Chaining designation.  Always zero for pull DMA
+     * 0 : Unchained buffer pointer
+     * 1 : Chained buffer pointer.  Next buffer descriptor (e.g. VA) stored
+     * in 1st 8-bytes in buffer.  For chained buffers, first 8-bytes of each
+     * buffer contain the next buffer descriptor formatted exactly like a PDE
+     * buffer descriptor.  This allows a chained PDE buffer to be sent using
+     * push DMA.
+     */
+    uint_reg_t c            : 1;
+    /**
+     * Notification interrupt will be delivered when the transaction has
+     * completed (all data has been read from or written to the Tile-side
+     * buffer).
+     */
+    uint_reg_t notif        : 1;
+    /**
+     * When 0, the XSIZE field specifies the total byte count for the
+     * transaction.  When 1, the XSIZE field is encoded as 2^(N+14) for N in
+     * {0..6}:
+     * 0 = 16KB
+     * 1 = 32KB
+     * 2 = 64KB
+     * 3 = 128KB
+     * 4 = 256KB
+     * 5 = 512KB
+     * 6 = 1MB
+     * All other encodings of the XSIZE field are reserved when SMOD=1
+     */
+    uint_reg_t smod         : 1;
+    /**
+     * Total number of bytes to move for this transaction.   When SMOD=1,
+     * this field is encoded - see SMOD description.
+     */
+    uint_reg_t xsize        : 14;
+    /** Reserved. */
+    uint_reg_t __reserved_0 : 1;
+    /**
+     * Generation number.  Used to indicate a valid descriptor in ring.  When
+     * a new descriptor is written into the ring, software must toggle this
+     * bit.  The net effect is that the GEN bit being written into new
+     * descriptors toggles each time the ring tail pointer wraps.
+     */
+    uint_reg_t gen          : 1;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t gen          : 1;
+    uint_reg_t __reserved_0 : 1;
+    uint_reg_t xsize        : 14;
+    uint_reg_t smod         : 1;
+    uint_reg_t notif        : 1;
+    uint_reg_t c            : 1;
+    uint_reg_t bsz          : 3;
+    int_reg_t va           : 42;
+#endif
+
+    /* Word 1 */
+
+#ifndef __BIG_ENDIAN__
+    /** IO-side address */
+    uint_reg_t io_address : 64;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t io_address : 64;
+#endif
+
+  };
+
+  /** Word access */
+  uint_reg_t words[2];
+} TRIO_DMA_DESC_t;
+#endif /* !defined(__ASSEMBLER__) */
+
+#endif /* !defined(__ARCH_TRIO_SHM_H__) */

arch/tile/include/arch/trio_shm_def.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_TRIO_SHM_DEF_H__
+#define __ARCH_TRIO_SHM_DEF_H__
+#endif /* !defined(__ARCH_TRIO_SHM_DEF_H__) */

arch/tile/include/arch/usb_host.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_USB_HOST_H__
+#define __ARCH_USB_HOST_H__
+
+#include <arch/abi.h>
+#include <arch/usb_host_def.h>
+
+#ifndef __ASSEMBLER__
+#endif /* !defined(__ASSEMBLER__) */
+
+#endif /* !defined(__ARCH_USB_HOST_H__) */

arch/tile/include/arch/usb_host_def.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_USB_HOST_DEF_H__
+#define __ARCH_USB_HOST_DEF_H__
+#endif /* !defined(__ARCH_USB_HOST_DEF_H__) */

arch/tile/include/asm/Kbuild

@@ -9,7 +9,6 @@ header-y += hardwall.h
 generic-y += bug.h
 generic-y += bugs.h
 generic-y += cputime.h
-generic-y += device.h
 generic-y += div64.h
 generic-y += emergency-restart.h
 generic-y += errno.h

arch/tile/include/asm/cache.h

@@ -27,11 +27,17 @@
 #define L2_CACHE_ALIGN(x)	(((x)+(L2_CACHE_BYTES-1)) & -L2_CACHE_BYTES)
 
 /*
- * TILE-Gx is fully coherent so we don't need to define ARCH_DMA_MINALIGN.
+ * TILEPro I/O is not always coherent (networking typically uses coherent
+ * I/O, but PCI traffic does not) and setting ARCH_DMA_MINALIGN to the
+ * L2 cacheline size helps ensure that kernel heap allocations are aligned.
+ * TILE-Gx I/O is always coherent when used on hash-for-home pages.
+ *
+ * However, it's possible at runtime to request not to use hash-for-home
+ * for the kernel heap, in which case the kernel will use flush-and-inval
+ * to manage coherence.  As a result, we use L2_CACHE_BYTES for the
+ * DMA minimum alignment to avoid false sharing in the kernel heap.
  */
-#ifndef __tilegx__
 #define ARCH_DMA_MINALIGN	L2_CACHE_BYTES
-#endif
 
 /* use the cache line size for the L2, which is where it counts */
 #define SMP_CACHE_BYTES_SHIFT	L2_CACHE_SHIFT

arch/tile/include/asm/checksum.h

@@ -21,4 +21,22 @@
 __wsum do_csum(const unsigned char *buff, int len);
 #define do_csum do_csum
 
+/*
+ * Return the sum of all the 16-bit subwords in a long.
+ * This sums two subwords on a 32-bit machine, and four on 64 bits.
+ * The implementation does two vector adds to capture any overflow.
+ */
+static inline unsigned int csum_long(unsigned long x)
+{
+	unsigned long ret;
+#ifdef __tilegx__
+	ret = __insn_v2sadu(x, 0);
+	ret = __insn_v2sadu(ret, 0);
+#else
+	ret = __insn_sadh_u(x, 0);
+	ret = __insn_sadh_u(ret, 0);
+#endif
+	return ret;
+}
+
 #endif /* _ASM_TILE_CHECKSUM_H */

arch/tile/include/asm/memprof.h → arch/tile/include/asm/device.h

@@ -10,24 +10,24 @@
  *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  *   NON INFRINGEMENT.  See the GNU General Public License for
  *   more details.
- *
- * The hypervisor's memory controller profiling infrastructure allows
- * the programmer to find out what fraction of the available memory
- * bandwidth is being consumed at each memory controller.  The
- * profiler provides start, stop, and clear operations to allows
- * profiling over a specific time window, as well as an interface for
- * reading the most recent profile values.
- *
- * This header declares IOCTL codes necessary to control memprof.
+ * Arch specific extensions to struct device
  */
-#ifndef _ASM_TILE_MEMPROF_H
-#define _ASM_TILE_MEMPROF_H
 
-#include <linux/ioctl.h>
+#ifndef _ASM_TILE_DEVICE_H
+#define _ASM_TILE_DEVICE_H
+
+struct dev_archdata {
+	/* DMA operations on that device */
+        struct dma_map_ops	*dma_ops;
+
+	/* Offset of the DMA address from the PA. */
+	dma_addr_t		dma_offset;
+
+	/* Highest DMA address that can be generated by this device. */
+	dma_addr_t		max_direct_dma_addr;
+};
 
-#define MEMPROF_IOCTL_TYPE 0xB4
-#define MEMPROF_IOCTL_START _IO(MEMPROF_IOCTL_TYPE, 0)
-#define MEMPROF_IOCTL_STOP _IO(MEMPROF_IOCTL_TYPE, 1)
-#define MEMPROF_IOCTL_CLEAR _IO(MEMPROF_IOCTL_TYPE, 2)
+struct pdev_archdata {
+};
 
-#endif /* _ASM_TILE_MEMPROF_H */
+#endif /* _ASM_TILE_DEVICE_H */

arch/tile/include/asm/dma-mapping.h

@@ -20,69 +20,80 @@
 #include <linux/cache.h>
 #include <linux/io.h>
 
-/*
- * Note that on x86 and powerpc, there is a "struct dma_mapping_ops"
- * that is used for all the DMA operations.  For now, we don't have an
- * equivalent on tile, because we only have a single way of doing DMA.
- * (Tilera bug 7994 to use dma_mapping_ops.)
- */
+extern struct dma_map_ops *tile_dma_map_ops;
+extern struct dma_map_ops *gx_pci_dma_map_ops;
+extern struct dma_map_ops *gx_legacy_pci_dma_map_ops;
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	if (dev && dev->archdata.dma_ops)
+		return dev->archdata.dma_ops;
+	else
+		return tile_dma_map_ops;
+}
+
+static inline dma_addr_t get_dma_offset(struct device *dev)
+{
+	return dev->archdata.dma_offset;
+}
+
+static inline void set_dma_offset(struct device *dev, dma_addr_t off)
+{
+	dev->archdata.dma_offset = off;
+}
 
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
-			  enum dma_data_direction);
-extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-			     size_t size, enum dma_data_direction);
-extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	       enum dma_data_direction);
-extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-			 int nhwentries, enum dma_data_direction);
-extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
-			       unsigned long offset, size_t size,
-			       enum dma_data_direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-			   size_t size, enum dma_data_direction);
-extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-				int nelems, enum dma_data_direction);
-extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-				   int nelems, enum dma_data_direction);
-
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, gfp_t flag);
-
-void dma_free_coherent(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle);
-
-extern void dma_sync_single_for_cpu(struct device *, dma_addr_t, size_t,
-				    enum dma_data_direction);
-extern void dma_sync_single_for_device(struct device *, dma_addr_t,
-				       size_t, enum dma_data_direction);
-extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t,
-					  unsigned long offset, size_t,
-					  enum dma_data_direction);
-extern void dma_sync_single_range_for_device(struct device *, dma_addr_t,
-					     unsigned long offset, size_t,
-					     enum dma_data_direction);
-extern void dma_cache_sync(struct device *dev, void *vaddr, size_t,
-			   enum dma_data_direction);
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr + get_dma_offset(dev);
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return daddr - get_dma_offset(dev);
+}
+
+static inline void dma_mark_clean(void *addr, size_t size) {}
+
+#include <asm-generic/dma-mapping-common.h>
+
+static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
+{
+	dev->archdata.dma_ops = ops;
+}
+
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	if (!dev->dma_mask)
+		return 0;
+
+	return addr + size - 1 <= *dev->dma_mask;
+}
 
 static inline int
 dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return 0;
+	return get_dma_ops(dev)->mapping_error(dev, dma_addr);
 }
 
 static inline int
 dma_supported(struct device *dev, u64 mask)
 {
-	return 1;
+	return get_dma_ops(dev)->dma_supported(dev, mask);
 }
 
 static inline int
 dma_set_mask(struct device *dev, u64 mask)
 {
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	/* Handle legacy PCI devices with limited memory addressability. */
+	if ((dma_ops == gx_pci_dma_map_ops) && (mask <= DMA_BIT_MASK(32))) {
+		set_dma_ops(dev, gx_legacy_pci_dma_map_ops);
+		set_dma_offset(dev, 0);
+		if (mask > dev->archdata.max_direct_dma_addr)
+			mask = dev->archdata.max_direct_dma_addr;
+	}
+
 	if (!dev->dma_mask || !dma_supported(dev, mask))
 		return -EIO;
 
@@ -91,4 +102,43 @@ dma_set_mask(struct device *dev, u64 mask)
 	return 0;
 }
 
+static inline void *dma_alloc_attrs(struct device *dev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t flag,
+				    struct dma_attrs *attrs)
+{
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+	void *cpu_addr;
+
+	cpu_addr = dma_ops->alloc(dev, size, dma_handle, flag, attrs);
+
+	debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr);
+
+	return cpu_addr;
+}
+
+static inline void dma_free_attrs(struct device *dev, size_t size,
+				  void *cpu_addr, dma_addr_t dma_handle,
+				  struct dma_attrs *attrs)
+{
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
+
+	dma_ops->free(dev, size, cpu_addr, dma_handle, attrs);
+}
+
+#define dma_alloc_coherent(d, s, h, f) dma_alloc_attrs(d, s, h, f, NULL)
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_attrs(d, s, h, f, NULL)
+#define dma_free_coherent(d, s, v, h) dma_free_attrs(d, s, v, h, NULL)
+#define dma_free_noncoherent(d, s, v, h) dma_free_attrs(d, s, v, h, NULL)
+
+/*
+ * dma_alloc_noncoherent() is #defined to return coherent memory,
+ * so there's no need to do any flushing here.
+ */
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+				  enum dma_data_direction direction)
+{
+}
+
 #endif /* _ASM_TILE_DMA_MAPPING_H */

arch/tile/include/asm/fixmap.h

@@ -45,14 +45,22 @@
  *
  * TLB entries of such buffers will not be flushed across
  * task switches.
- *
- * We don't bother with a FIX_HOLE since above the fixmaps
- * is unmapped memory in any case.
  */
 enum fixed_addresses {
+#ifdef __tilegx__
+	/*
+	 * TILEPro has unmapped memory above so the hole isn't needed,
+	 * and in any case the hole pushes us over a single 16MB pmd.
+	 */
+	FIX_HOLE,
+#endif
 #ifdef CONFIG_HIGHMEM
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
 	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+#ifdef __tilegx__  /* see homecache.c */
+	FIX_HOMECACHE_BEGIN,
+	FIX_HOMECACHE_END = FIX_HOMECACHE_BEGIN+(NR_CPUS)-1,
 #endif
 	__end_of_permanent_fixed_addresses,
 

arch/tile/include/asm/homecache.h

@@ -79,10 +79,17 @@ extern void homecache_change_page_home(struct page *, int order, int home);
 /*
  * Flush a page out of whatever cache(s) it is in.
  * This is more than just finv, since it properly handles waiting
- * for the data to reach memory on tilepro, but it can be quite
- * heavyweight, particularly on hash-for-home memory.
+ * for the data to reach memory, but it can be quite
+ * heavyweight, particularly on incoherent or immutable memory.
  */
-extern void homecache_flush_cache(struct page *, int order);
+extern void homecache_finv_page(struct page *);
+
+/*
+ * Flush a page out of the specified home cache.
+ * Note that the specified home need not be the actual home of the page,
+ * as for example might be the case when coordinating with I/O devices.
+ */
+extern void homecache_finv_map_page(struct page *, int home);
 
 /*
  * Allocate a page with the given GFP flags, home, and optionally
@@ -104,10 +111,10 @@ extern struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask,
  * routines use homecache_change_page_home() to reset the home
  * back to the default before returning the page to the allocator.
  */
+void __homecache_free_pages(struct page *, unsigned int order);
 void homecache_free_pages(unsigned long addr, unsigned int order);
-#define homecache_free_page(page) \
-  homecache_free_pages((page), 0)
-
+#define __homecache_free_page(page) __homecache_free_pages((page), 0)
+#define homecache_free_page(page) homecache_free_pages((page), 0)
 
 
 /*

arch/tile/include/asm/io.h

@@ -62,6 +62,92 @@ extern void iounmap(volatile void __iomem *addr);
 #define mm_ptov(addr)		((void *)phys_to_virt(addr))
 #define mm_vtop(addr)		((unsigned long)virt_to_phys(addr))
 
+#if CHIP_HAS_MMIO()
+
+/*
+ * We use inline assembly to guarantee that the compiler does not
+ * split an access into multiple byte-sized accesses as it might
+ * sometimes do if a register data structure is marked "packed".
+ * Obviously on tile we can't tolerate such an access being
+ * actually unaligned, but we want to avoid the case where the
+ * compiler conservatively would generate multiple accesses even
+ * for an aligned read or write.
+ */
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(const volatile u8 __force *)addr;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	u16 ret;
+	asm volatile("ld2u %0, %1" : "=r" (ret) : "r" (addr));
+	barrier();
+	return le16_to_cpu(ret);
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	u32 ret;
+	/* Sign-extend to conform to u32 ABI sign-extension convention. */
+	asm volatile("ld4s %0, %1" : "=r" (ret) : "r" (addr));
+	barrier();
+	return le32_to_cpu(ret);
+}
+
+static inline u64 __raw_readq(const volatile void __iomem *addr)
+{
+	u64 ret;
+	asm volatile("ld %0, %1" : "=r" (ret) : "r" (addr));
+	barrier();
+	return le64_to_cpu(ret);
+}
+
+static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
+{
+	*(volatile u8 __force *)addr = val;
+}
+
+static inline void __raw_writew(u16 val, volatile void __iomem *addr)
+{
+	asm volatile("st2 %0, %1" :: "r" (addr), "r" (cpu_to_le16(val)));
+}
+
+static inline void __raw_writel(u32 val, volatile void __iomem *addr)
+{
+	asm volatile("st4 %0, %1" :: "r" (addr), "r" (cpu_to_le32(val)));
+}
+
+static inline void __raw_writeq(u64 val, volatile void __iomem *addr)
+{
+	asm volatile("st %0, %1" :: "r" (addr), "r" (cpu_to_le64(val)));
+}
+
+/*
+ * The on-chip I/O hardware on tilegx is configured with VA=PA for the
+ * kernel's PA range.  The low-level APIs and field names use "va" and
+ * "void *" nomenclature, to be consistent with the general notion
+ * that the addresses in question are virtualizable, but in the kernel
+ * context we are actually manipulating PA values.  (In other contexts,
+ * e.g. access from user space, we do in fact use real virtual addresses
+ * in the va fields.)  To allow readers of the code to understand what's
+ * happening, we direct their attention to this comment by using the
+ * following two functions that just duplicate __va() and __pa().
+ */
+typedef unsigned long tile_io_addr_t;
+static inline tile_io_addr_t va_to_tile_io_addr(void *va)
+{
+	BUILD_BUG_ON(sizeof(phys_addr_t) != sizeof(tile_io_addr_t));
+	return __pa(va);
+}
+static inline void *tile_io_addr_to_va(tile_io_addr_t tile_io_addr)
+{
+	return __va(tile_io_addr);
+}
+
+#else /* CHIP_HAS_MMIO() */
+
 #ifdef CONFIG_PCI
 
 extern u8 _tile_readb(unsigned long addr);
@@ -73,10 +159,19 @@ extern void _tile_writew(u16 val, unsigned long addr);
 extern void _tile_writel(u32 val, unsigned long addr);
 extern void _tile_writeq(u64 val, unsigned long addr);
 
-#else
+#define __raw_readb(addr) _tile_readb((unsigned long)addr)
+#define __raw_readw(addr) _tile_readw((unsigned long)addr)
+#define __raw_readl(addr) _tile_readl((unsigned long)addr)
+#define __raw_readq(addr) _tile_readq((unsigned long)addr)
+#define __raw_writeb(val, addr) _tile_writeb(val, (unsigned long)addr)
+#define __raw_writew(val, addr) _tile_writew(val, (unsigned long)addr)
+#define __raw_writel(val, addr) _tile_writel(val, (unsigned long)addr)
+#define __raw_writeq(val, addr) _tile_writeq(val, (unsigned long)addr)
+
+#else /* CONFIG_PCI */
 
 /*
- * The Tile architecture does not support IOMEM unless PCI is enabled.
+ * The tilepro architecture does not support IOMEM unless PCI is enabled.
  * Unfortunately we can't yet simply not declare these methods,
  * since some generic code that compiles into the kernel, but
  * we never run, uses them unconditionally.
@@ -88,65 +183,58 @@ static inline int iomem_panic(void)
 	return 0;
 }
 
-static inline u8 _tile_readb(unsigned long addr)
+static inline u8 readb(unsigned long addr)
 {
 	return iomem_panic();
 }
 
-static inline u16 _tile_readw(unsigned long addr)
+static inline u16 _readw(unsigned long addr)
 {
 	return iomem_panic();
 }
 
-static inline u32 _tile_readl(unsigned long addr)
+static inline u32 readl(unsigned long addr)
 {
 	return iomem_panic();
 }
 
-static inline u64 _tile_readq(unsigned long addr)
+static inline u64 readq(unsigned long addr)
 {
 	return iomem_panic();
 }
 
-static inline void _tile_writeb(u8  val, unsigned long addr)
+static inline void writeb(u8  val, unsigned long addr)
 {
 	iomem_panic();
 }
 
-static inline void _tile_writew(u16 val, unsigned long addr)
+static inline void writew(u16 val, unsigned long addr)
 {
 	iomem_panic();
 }
 
-static inline void _tile_writel(u32 val, unsigned long addr)
+static inline void writel(u32 val, unsigned long addr)
 {
 	iomem_panic();
 }
 
-static inline void _tile_writeq(u64 val, unsigned long addr)
+static inline void writeq(u64 val, unsigned long addr)
 {
 	iomem_panic();
 }
 
-#endif
+#endif /* CONFIG_PCI */
+
+#endif /* CHIP_HAS_MMIO() */
 
-#define readb(addr) _tile_readb((unsigned long)addr)
-#define readw(addr) _tile_readw((unsigned long)addr)
-#define readl(addr) _tile_readl((unsigned long)addr)
-#define readq(addr) _tile_readq((unsigned long)addr)
-#define writeb(val, addr) _tile_writeb(val, (unsigned long)addr)
-#define writew(val, addr) _tile_writew(val, (unsigned long)addr)
-#define writel(val, addr) _tile_writel(val, (unsigned long)addr)
-#define writeq(val, addr) _tile_writeq(val, (unsigned long)addr)
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_readq readq
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-#define __raw_writeq writeq
+#define readb __raw_readb
+#define readw __raw_readw
+#define readl __raw_readl
+#define readq __raw_readq
+#define writeb __raw_writeb
+#define writew __raw_writew
+#define writel __raw_writel
+#define writeq __raw_writeq
 
 #define readb_relaxed readb
 #define readw_relaxed readw

arch/tile/include/asm/page.h

@@ -174,7 +174,9 @@ static inline __attribute_const__ int get_order(unsigned long size)
 #define MEM_LOW_END		(HALF_VA_SPACE - 1)         /* low half */
 #define MEM_HIGH_START		(-HALF_VA_SPACE)            /* high half */
 #define PAGE_OFFSET		MEM_HIGH_START
-#define _VMALLOC_START		_AC(0xfffffff500000000, UL) /* 4 GB */
+#define FIXADDR_BASE		_AC(0xfffffff400000000, UL) /* 4 GB */
+#define FIXADDR_TOP		_AC(0xfffffff500000000, UL) /* 4 GB */
+#define _VMALLOC_START		FIXADDR_TOP
 #define HUGE_VMAP_BASE		_AC(0xfffffff600000000, UL) /* 4 GB */
 #define MEM_SV_START		_AC(0xfffffff700000000, UL) /* 256 MB */
 #define MEM_SV_INTRPT		MEM_SV_START
@@ -185,9 +187,6 @@ static inline __attribute_const__ int get_order(unsigned long size)
 /* Highest DTLB address we will use */
 #define KERNEL_HIGH_VADDR	MEM_SV_START
 
-/* Since we don't currently provide any fixmaps, we use an impossible VA. */
-#define FIXADDR_TOP             MEM_HV_START
-
 #else /* !__tilegx__ */
 
 /*

arch/tile/include/asm/pci.h

@@ -15,9 +15,13 @@
 #ifndef _ASM_TILE_PCI_H
 #define _ASM_TILE_PCI_H
 
+#include <linux/dma-mapping.h>
 #include <linux/pci.h>
+#include <linux/numa.h>
 #include <asm-generic/pci_iomap.h>
 
+#ifndef __tilegx__
+
 /*
  * Structure of a PCI controller (host bridge)
  */
@@ -40,6 +44,16 @@ struct pci_controller {
 	struct resource mem_resources[3];
 };
 
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+extern int tile_plx_gen1;
+
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
+
+#define	TILE_NUM_PCIE	2
+
 /*
  * The hypervisor maps the entirety of CPA-space as bus addresses, so
  * bus addresses are physical addresses.  The networking and block
@@ -47,15 +61,135 @@ struct pci_controller {
  */
 #define PCI_DMA_BUS_IS_PHYS     1
 
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#else
+
+#include <asm/page.h>
+#include <gxio/trio.h>
+
+/**
+ * We reserve the hugepage-size address range at the top of the 64-bit address
+ * space to serve as the PCI window, emulating the BAR0 space of an endpoint
+ * device. This window is used by the chip-to-chip applications running on
+ * the RC node. The reason for carving out this window is that Mem-Maps that
+ * back up this window will not overlap with those that map the real physical
+ * memory.
+ */
+#define PCIE_HOST_BAR0_SIZE		HPAGE_SIZE
+#define PCIE_HOST_BAR0_START		HPAGE_MASK
+
+/**
+ * The first PAGE_SIZE of the above "BAR" window is mapped to the
+ * gxpci_host_regs structure.
+ */
+#define PCIE_HOST_REGS_SIZE		PAGE_SIZE
+
+/*
+ * This is the PCI address where the Mem-Map interrupt regions start.
+ * We use the 2nd to the last huge page of the 64-bit address space.
+ * The last huge page is used for the rootcomplex "bar", for C2C purpose.
+ */
+#define	MEM_MAP_INTR_REGIONS_BASE	(HPAGE_MASK - HPAGE_SIZE)
+
+/*
+ * Each Mem-Map interrupt region occupies 4KB.
+ */
+#define	MEM_MAP_INTR_REGION_SIZE	(1 << TRIO_MAP_MEM_LIM__ADDR_SHIFT)
+
+/*
+ * Allocate the PCI BAR window right below 4GB.
+ */
+#define	TILE_PCI_BAR_WINDOW_TOP		(1ULL << 32)
+
+/*
+ * Allocate 1GB for the PCI BAR window.
+ */
+#define	TILE_PCI_BAR_WINDOW_SIZE	(1 << 30)
+
+/*
+ * This is the highest bus address targeting the host memory that
+ * can be generated by legacy PCI devices with 32-bit or less
+ * DMA capability, dictated by the BAR window size and location.
+ */
+#define	TILE_PCI_MAX_DIRECT_DMA_ADDRESS \
+	(TILE_PCI_BAR_WINDOW_TOP - TILE_PCI_BAR_WINDOW_SIZE - 1)
+
+/*
+ * We shift the PCI bus range for all the physical memory up by the whole PA
+ * range. The corresponding CPA of an incoming PCI request will be the PCI
+ * address minus TILE_PCI_MEM_MAP_BASE_OFFSET. This also implies
+ * that the 64-bit capable devices will be given DMA addresses as
+ * the CPA plus TILE_PCI_MEM_MAP_BASE_OFFSET. To support 32-bit
+ * devices, we create a separate map region that handles the low
+ * 4GB.
+ */
+#define	TILE_PCI_MEM_MAP_BASE_OFFSET	(1ULL << CHIP_PA_WIDTH())
+
+/*
+ * Start of the PCI memory resource, which starts at the end of the
+ * maximum system physical RAM address.
+ */
+#define	TILE_PCI_MEM_START	(1ULL << CHIP_PA_WIDTH())
+
+/*
+ * Structure of a PCI controller (host bridge) on Gx.
+ */
+struct pci_controller {
+
+	/* Pointer back to the TRIO that this PCIe port is connected to. */
+	gxio_trio_context_t *trio;
+	int mac;		/* PCIe mac index on the TRIO shim */
+	int trio_index;		/* Index of TRIO shim that contains the MAC. */
+
+	int pio_mem_index;	/* PIO region index for memory access */
+
+	/*
+	 * Mem-Map regions for all the memory controllers so that Linux can
+	 * map all of its physical memory space to the PCI bus.
+	 */
+	int mem_maps[MAX_NUMNODES];
+
+	int index;		/* PCI domain number */
+	struct pci_bus *root_bus;
+
+	/* PCI memory space resource for this controller. */
+	struct resource mem_space;
+	char mem_space_name[32];
+
+	uint64_t mem_offset;	/* cpu->bus memory mapping offset. */
+
+	int first_busno;
+
+	struct pci_ops *ops;
+
+	/* Table that maps the INTx numbers to Linux irq numbers. */
+	int irq_intx_table[4];
+
+	/* Address ranges that are routed to this controller/bridge. */
+	struct resource mem_resources[3];
+};
+
+extern struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES];
+extern gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO];
+
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/*
+ * The PCI address space does not equal the physical memory address
+ * space (we have an IOMMU). The IDE and SCSI device layers use this
+ * boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     0
+
+#endif /* __tilegx__ */
+
 int __init tile_pci_init(void);
 int __init pcibios_init(void);
 
-static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
-
 void __devinit pcibios_fixup_bus(struct pci_bus *bus);
 
-#define	TILE_NUM_PCIE	2
-
 #define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
 
 /*
@@ -79,19 +213,10 @@ static inline int pcibios_assign_all_busses(void)
 #define PCIBIOS_MIN_MEM		0
 #define PCIBIOS_MIN_IO		0
 
-/*
- * This flag tells if the platform is TILEmpower that needs
- * special configuration for the PLX switch chip.
- */
-extern int tile_plx_gen1;
-
 /* Use any cpu for PCI. */
 #define cpumask_of_pcibus(bus) cpu_online_mask
 
 /* implement the pci_ DMA API in terms of the generic device dma_ one */
 #include <asm-generic/pci-dma-compat.h>
 
-/* generic pci stuff */
-#include <asm-generic/pci.h>
-
 #endif /* _ASM_TILE_PCI_H */

arch/tile/include/gxio/common.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _GXIO_COMMON_H_
+#define _GXIO_COMMON_H_
+
+/*
+ * Routines shared between the various GXIO device components.
+ */
+
+#include <hv/iorpc.h>
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+
+/* Define the standard gxio MMIO functions using kernel functions. */
+#define __gxio_mmio_read8(addr)		readb(addr)
+#define __gxio_mmio_read16(addr)	readw(addr)
+#define __gxio_mmio_read32(addr)	readl(addr)
+#define __gxio_mmio_read64(addr)	readq(addr)
+#define __gxio_mmio_write8(addr, val)	writeb((val), (addr))
+#define __gxio_mmio_write16(addr, val)	writew((val), (addr))
+#define __gxio_mmio_write32(addr, val)	writel((val), (addr))
+#define __gxio_mmio_write64(addr, val)	writeq((val), (addr))
+#define __gxio_mmio_read(addr)		__gxio_mmio_read64(addr)
+#define __gxio_mmio_write(addr, val)	__gxio_mmio_write64((addr), (val))
+
+#endif /* !_GXIO_COMMON_H_ */

arch/tile/include/gxio/dma_queue.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _GXIO_DMA_QUEUE_H_
+#define _GXIO_DMA_QUEUE_H_
+
+/*
+ * DMA queue management APIs shared between TRIO and mPIPE.
+ */
+
+#include "common.h"
+
+/* The credit counter lives in the high 32 bits. */
+#define DMA_QUEUE_CREDIT_SHIFT 32
+
+/*
+ * State object that tracks a DMA queue's head and tail indices, as
+ * well as the number of commands posted and completed.  The
+ * structure is accessed via a thread-safe, lock-free algorithm.
+ */
+typedef struct {
+	/*
+	 * Address of a MPIPE_EDMA_POST_REGION_VAL_t,
+	 * TRIO_PUSH_DMA_REGION_VAL_t, or TRIO_PULL_DMA_REGION_VAL_t
+	 * register.  These register have identical encodings and provide
+	 * information about how many commands have been processed.
+	 */
+	void *post_region_addr;
+
+	/*
+	 * A lazily-updated count of how many edescs the hardware has
+	 * completed.
+	 */
+	uint64_t hw_complete_count __attribute__ ((aligned(64)));
+
+	/*
+	 * High 32 bits are a count of available egress command credits,
+	 * low 24 bits are the next egress "slot".
+	 */
+	int64_t credits_and_next_index;
+
+} __gxio_dma_queue_t;
+
+/* Initialize a dma queue. */
+extern void __gxio_dma_queue_init(__gxio_dma_queue_t *dma_queue,
+				  void *post_region_addr,
+				  unsigned int num_entries);
+
+/*
+ * Update the "credits_and_next_index" and "hw_complete_count" fields
+ * based on pending hardware completions.  Note that some other thread
+ * may have already done this and, importantly, may still be in the
+ * process of updating "credits_and_next_index".
+ */
+extern void __gxio_dma_queue_update_credits(__gxio_dma_queue_t *dma_queue);
+
+/* Wait for credits to become available. */
+extern int64_t __gxio_dma_queue_wait_for_credits(__gxio_dma_queue_t *dma_queue,
+						 int64_t modifier);
+
+/* Reserve slots in the queue, optionally waiting for slots to become
+ * available, and optionally returning a "completion_slot" suitable for
+ * direct comparison to "hw_complete_count".
+ */
+static inline int64_t __gxio_dma_queue_reserve(__gxio_dma_queue_t *dma_queue,
+					       unsigned int num, bool wait,
+					       bool completion)
+{
+	uint64_t slot;
+
+	/*
+	 * Try to reserve 'num' egress command slots.  We do this by
+	 * constructing a constant that subtracts N credits and adds N to
+	 * the index, and using fetchaddgez to only apply it if the credits
+	 * count doesn't go negative.
+	 */
+	int64_t modifier = (((int64_t)(-num)) << DMA_QUEUE_CREDIT_SHIFT) | num;
+	int64_t old =
+		__insn_fetchaddgez(&dma_queue->credits_and_next_index,
+				   modifier);
+
+	if (unlikely(old + modifier < 0)) {
+		/*
+		 * We're out of credits.  Try once to get more by checking for
+		 * completed egress commands.  If that fails, wait or fail.
+		 */
+		__gxio_dma_queue_update_credits(dma_queue);
+		old = __insn_fetchaddgez(&dma_queue->credits_and_next_index,
+					 modifier);
+		if (old + modifier < 0) {
+			if (wait)
+				old = __gxio_dma_queue_wait_for_credits
+					(dma_queue, modifier);
+			else
+				return GXIO_ERR_DMA_CREDITS;
+		}
+	}
+
+	/* The bottom 24 bits of old encode the "slot". */
+	slot = (old & 0xffffff);
+
+	if (completion) {
+		/*
+		 * A "completion_slot" is a "slot" which can be compared to
+		 * "hw_complete_count" at any time in the future.  To convert
+		 * "slot" into a "completion_slot", we access "hw_complete_count"
+		 * once (knowing that we have reserved a slot, and thus, it will
+		 * be "basically" accurate), and combine its high 40 bits with
+		 * the 24 bit "slot", and handle "wrapping" by adding "1 << 24"
+		 * if the result is LESS than "hw_complete_count".
+		 */
+		uint64_t complete;
+		complete = ACCESS_ONCE(dma_queue->hw_complete_count);
+		slot |= (complete & 0xffffffffff000000);
+		if (slot < complete)
+			slot += 0x1000000;
+	}
+
+	/*
+	 * If any of our slots mod 256 were equivalent to 0, go ahead and
+	 * collect some egress credits, and update "hw_complete_count", and
+	 * make sure the index doesn't overflow into the credits.
+	 */
+	if (unlikely(((old + num) & 0xff) < num)) {
+		__gxio_dma_queue_update_credits(dma_queue);
+
+		/* Make sure the index doesn't overflow into the credits. */
+#ifdef __BIG_ENDIAN__
+		*(((uint8_t *)&dma_queue->credits_and_next_index) + 4) = 0;
+#else
+		*(((uint8_t *)&dma_queue->credits_and_next_index) + 3) = 0;
+#endif
+	}
+
+	return slot;
+}
+
+/* Non-inlinable "__gxio_dma_queue_reserve(..., true)". */
+extern int64_t __gxio_dma_queue_reserve_aux(__gxio_dma_queue_t *dma_queue,
+					    unsigned int num, int wait);
+
+/* Check whether a particular "completion slot" has completed.
+ *
+ * Note that this function requires a "completion slot", and thus
+ * cannot be used with the result of any "reserve_fast" function.
+ */
+extern int __gxio_dma_queue_is_complete(__gxio_dma_queue_t *dma_queue,
+					int64_t completion_slot, int update);
+
+#endif /* !_GXIO_DMA_QUEUE_H_ */

arch/tile/include/gxio/iorpc_globals.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+#ifndef __IORPC_LINUX_RPC_H__
+#define __IORPC_LINUX_RPC_H__
+
+#include <hv/iorpc.h>
+
+#include <linux/string.h>
+#include <linux/module.h>
+#include <asm/pgtable.h>
+
+#define IORPC_OP_ARM_POLLFD            IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9000)
+#define IORPC_OP_CLOSE_POLLFD          IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9001)
+#define IORPC_OP_GET_MMIO_BASE         IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
+#define IORPC_OP_CHECK_MMIO_OFFSET     IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
+
+int __iorpc_arm_pollfd(int fd, int pollfd_cookie);
+
+int __iorpc_close_pollfd(int fd, int pollfd_cookie);
+
+int __iorpc_get_mmio_base(int fd, HV_PTE *base);
+
+int __iorpc_check_mmio_offset(int fd, unsigned long offset, unsigned long size);
+
+#endif /* !__IORPC_LINUX_RPC_H__ */

arch/tile/include/gxio/iorpc_mpipe_info.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+#ifndef __GXIO_MPIPE_INFO_LINUX_RPC_H__
+#define __GXIO_MPIPE_INFO_LINUX_RPC_H__
+
+#include <hv/iorpc.h>
+
+#include <hv/drv_mpipe_intf.h>
+#include <asm/page.h>
+#include <gxio/kiorpc.h>
+#include <gxio/mpipe.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <asm/pgtable.h>
+
+
+#define GXIO_MPIPE_INFO_OP_ENUMERATE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1251)
+#define GXIO_MPIPE_INFO_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
+#define GXIO_MPIPE_INFO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
+
+
+int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context,
+				  unsigned int idx,
+				  _gxio_mpipe_link_name_t * name,
+				  _gxio_mpipe_link_mac_t * mac);
+
+int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t * context,
+				  HV_PTE *base);
+
+int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t * context,
+				      unsigned long offset, unsigned long size);
+
+#endif /* !__GXIO_MPIPE_INFO_LINUX_RPC_H__ */

arch/tile/include/gxio/iorpc_usb_host.h

+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+#ifndef __GXIO_USB_HOST_LINUX_RPC_H__
+#define __GXIO_USB_HOST_LINUX_RPC_H__
+
+#include <hv/iorpc.h>
+
+#include <hv/drv_usb_host_intf.h>
+#include <asm/page.h>
+#include <gxio/kiorpc.h>
+#include <gxio/usb_host.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <asm/pgtable.h>
+
+#define GXIO_USB_HOST_OP_CFG_INTERRUPT IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1800)
+#define GXIO_USB_HOST_OP_REGISTER_CLIENT_MEMORY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1801)
+#define GXIO_USB_HOST_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
+#define GXIO_USB_HOST_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
+
+int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t * context, int inter_x,
+				int inter_y, int inter_ipi, int inter_event);
+
+int gxio_usb_host_register_client_memory(gxio_usb_host_context_t * context,
+					 HV_PTE pte, unsigned int flags);
+
+int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t * context,
+				HV_PTE *base);
+
+int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t * context,
+				    unsigned long offset, unsigned long size);
+
+#endif /* !__GXIO_USB_HOST_LINUX_RPC_H__ */

arch/tile/kernel/Makefile

@@ -14,4 +14,9 @@ obj-$(CONFIG_SMP)		+= smpboot.o smp.o tlb.o
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel_$(BITS).o
+ifdef CONFIG_TILEGX
+obj-$(CONFIG_PCI)		+= pci_gx.o
+else
 obj-$(CONFIG_PCI)		+= pci.o
+endif
+obj-$(CONFIG_TILE_USB)		+= usb.o

arch/tile/mm/pgtable.c

@@ -575,13 +575,6 @@ void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
 }
 EXPORT_SYMBOL(ioremap_prot);
 
-/* Map a PCI MMIO bus address into VA space. */
-void __iomem *ioremap(resource_size_t phys_addr, unsigned long size)
-{
-	panic("ioremap for PCI MMIO is not supported");
-}
-EXPORT_SYMBOL(ioremap);
-
 /* Unmap an MMIO VA mapping. */
 void iounmap(volatile void __iomem *addr_in)
 {