Commit f0b8dca8 authored by Hans Verkuil's avatar Hans Verkuil Committed by Tony Lindgren

ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES

The CEC pin was always pulled up, making it impossible to use it.

Change to PIN_INPUT so it can be used by the new CEC support.
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
parent 910958b6
...@@ -13,7 +13,7 @@ ...@@ -13,7 +13,7 @@
/* Pandaboard Rev A4+ have external pullups on SCL & SDA */ /* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins { &dss_hdmi_pins {
pinctrl-single,pins = < pinctrl-single,pins = <
OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>; >;
......
...@@ -34,7 +34,7 @@ &sound { ...@@ -34,7 +34,7 @@ &sound {
/* PandaboardES has external pullups on SCL & SDA */ /* PandaboardES has external pullups on SCL & SDA */
&dss_hdmi_pins { &dss_hdmi_pins {
pinctrl-single,pins = < pinctrl-single,pins = <
OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>; >;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment