Commit f0d1b0b3 authored by David Howells's avatar David Howells Committed by Linus Torvalds

[PATCH] LOG2: Implement a general integer log2 facility in the kernel

This facility provides three entry points:

	ilog2()		Log base 2 of unsigned long
	ilog2_u32()	Log base 2 of u32
	ilog2_u64()	Log base 2 of u64

These facilities can either be used inside functions on dynamic data:

	int do_something(long q)
	{
		...;
		y = ilog2(x)
		...;
	}

Or can be used to statically initialise global variables with constant values:

	unsigned n = ilog2(27);

When performing static initialisation, the compiler will report "error:
initializer element is not constant" if asked to take a log of zero or of
something not reducible to a constant.  They treat negative numbers as
unsigned.

When not dealing with a constant, they fall back to using fls() which permits
them to use arch-specific log calculation instructions - such as BSR on
x86/x86_64 or SCAN on FRV - if available.

[akpm@osdl.org: MMC fix]
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Howells <dhowells@redhat.com>
Cc: Wojtek Kaniewski <wojtekka@toxygen.net>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent b3d7ae5f
...@@ -25,6 +25,14 @@ config RWSEM_XCHGADD_ALGORITHM ...@@ -25,6 +25,14 @@ config RWSEM_XCHGADD_ALGORITHM
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_FIND_NEXT_BIT config GENERIC_FIND_NEXT_BIT
bool bool
default y default y
......
...@@ -74,6 +74,14 @@ config RWSEM_GENERIC_SPINLOCK ...@@ -74,6 +74,14 @@ config RWSEM_GENERIC_SPINLOCK
config RWSEM_XCHGADD_ALGORITHM config RWSEM_XCHGADD_ALGORITHM
bool bool
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_HWEIGHT config GENERIC_HWEIGHT
bool bool
default y default y
......
...@@ -41,6 +41,14 @@ config RWSEM_GENERIC_SPINLOCK ...@@ -41,6 +41,14 @@ config RWSEM_GENERIC_SPINLOCK
config RWSEM_XCHGADD_ALGORITHM config RWSEM_XCHGADD_ALGORITHM
bool bool
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_HWEIGHT config GENERIC_HWEIGHT
bool bool
default y default y
......
...@@ -45,6 +45,14 @@ config GENERIC_TIME ...@@ -45,6 +45,14 @@ config GENERIC_TIME
config RWSEM_XCHGADD_ALGORITHM config RWSEM_XCHGADD_ALGORITHM
bool bool
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_BUST_SPINLOCK config GENERIC_BUST_SPINLOCK
bool bool
......
...@@ -16,6 +16,14 @@ config RWSEM_GENERIC_SPINLOCK ...@@ -16,6 +16,14 @@ config RWSEM_GENERIC_SPINLOCK
config RWSEM_XCHGADD_ALGORITHM config RWSEM_XCHGADD_ALGORITHM
bool bool
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_FIND_NEXT_BIT config GENERIC_FIND_NEXT_BIT
bool bool
default y default y
......
...@@ -41,6 +41,14 @@ config TIME_LOW_RES ...@@ -41,6 +41,14 @@ config TIME_LOW_RES
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default y
config ARCH_HAS_ILOG2_U64
bool
default y
mainmenu "Fujitsu FR-V Kernel Configuration" mainmenu "Fujitsu FR-V Kernel Configuration"
source "init/Kconfig" source "init/Kconfig"
......
...@@ -29,6 +29,14 @@ config RWSEM_XCHGADD_ALGORITHM ...@@ -29,6 +29,14 @@ config RWSEM_XCHGADD_ALGORITHM
bool bool
default n default n
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_FIND_NEXT_BIT config GENERIC_FIND_NEXT_BIT
bool bool
default y default y
......
...@@ -248,6 +248,14 @@ config RWSEM_XCHGADD_ALGORITHM ...@@ -248,6 +248,14 @@ config RWSEM_XCHGADD_ALGORITHM
depends on !M386 depends on !M386
default y default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_CALIBRATE_DELAY config GENERIC_CALIBRATE_DELAY
bool bool
default y default y
......
...@@ -34,6 +34,14 @@ config RWSEM_XCHGADD_ALGORITHM ...@@ -34,6 +34,14 @@ config RWSEM_XCHGADD_ALGORITHM
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_FIND_NEXT_BIT config GENERIC_FIND_NEXT_BIT
bool bool
default y default y
......
...@@ -214,6 +214,14 @@ config RWSEM_XCHGADD_ALGORITHM ...@@ -214,6 +214,14 @@ config RWSEM_XCHGADD_ALGORITHM
bool bool
default n default n
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_FIND_NEXT_BIT config GENERIC_FIND_NEXT_BIT
bool bool
default y default y
......
...@@ -17,6 +17,14 @@ config RWSEM_GENERIC_SPINLOCK ...@@ -17,6 +17,14 @@ config RWSEM_GENERIC_SPINLOCK
config RWSEM_XCHGADD_ALGORITHM config RWSEM_XCHGADD_ALGORITHM
bool bool
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_HWEIGHT config GENERIC_HWEIGHT
bool bool
default y default y
......
...@@ -25,6 +25,14 @@ config RWSEM_XCHGADD_ALGORITHM ...@@ -25,6 +25,14 @@ config RWSEM_XCHGADD_ALGORITHM
bool bool
default n default n
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_FIND_NEXT_BIT config GENERIC_FIND_NEXT_BIT
bool bool
default y default y
......
...@@ -819,6 +819,14 @@ config RWSEM_GENERIC_SPINLOCK ...@@ -819,6 +819,14 @@ config RWSEM_GENERIC_SPINLOCK
config RWSEM_XCHGADD_ALGORITHM config RWSEM_XCHGADD_ALGORITHM
bool bool
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_FIND_NEXT_BIT config GENERIC_FIND_NEXT_BIT
bool bool
default y default y
......
...@@ -25,6 +25,14 @@ config RWSEM_GENERIC_SPINLOCK ...@@ -25,6 +25,14 @@ config RWSEM_GENERIC_SPINLOCK
config RWSEM_XCHGADD_ALGORITHM config RWSEM_XCHGADD_ALGORITHM
bool bool
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_FIND_NEXT_BIT config GENERIC_FIND_NEXT_BIT
bool bool
default y default y
......
...@@ -41,6 +41,14 @@ config RWSEM_XCHGADD_ALGORITHM ...@@ -41,6 +41,14 @@ config RWSEM_XCHGADD_ALGORITHM
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_HWEIGHT config GENERIC_HWEIGHT
bool bool
default y default y
......
...@@ -19,6 +19,14 @@ config RWSEM_XCHGADD_ALGORITHM ...@@ -19,6 +19,14 @@ config RWSEM_XCHGADD_ALGORITHM
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default y
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_HWEIGHT config GENERIC_HWEIGHT
bool bool
default y default y
......
...@@ -22,6 +22,14 @@ config RWSEM_XCHGADD_ALGORITHM ...@@ -22,6 +22,14 @@ config RWSEM_XCHGADD_ALGORITHM
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_HWEIGHT config GENERIC_HWEIGHT
bool bool
default y default y
......
...@@ -59,6 +59,14 @@ config LOCKDEP_SUPPORT ...@@ -59,6 +59,14 @@ config LOCKDEP_SUPPORT
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
source "init/Kconfig" source "init/Kconfig"
menu "System type" menu "System type"
......
...@@ -39,6 +39,14 @@ config RWSEM_XCHGADD_ALGORITHM ...@@ -39,6 +39,14 @@ config RWSEM_XCHGADD_ALGORITHM
config GENERIC_ISA_DMA config GENERIC_ISA_DMA
bool bool
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
source init/Kconfig source init/Kconfig
menu "System type" menu "System type"
......
...@@ -166,6 +166,14 @@ config ARCH_MAY_HAVE_PC_FDC ...@@ -166,6 +166,14 @@ config ARCH_MAY_HAVE_PC_FDC
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config SUN_PM config SUN_PM
bool bool
default y default y
......
...@@ -34,6 +34,14 @@ config ARCH_MAY_HAVE_PC_FDC ...@@ -34,6 +34,14 @@ config ARCH_MAY_HAVE_PC_FDC
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config AUDIT_ARCH config AUDIT_ARCH
bool bool
default y default y
......
...@@ -38,6 +38,14 @@ config TIME_LOW_RES ...@@ -38,6 +38,14 @@ config TIME_LOW_RES
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
# Turn off some random 386 crap that can affect device config # Turn off some random 386 crap that can affect device config
config ISA config ISA
bool bool
......
...@@ -101,6 +101,14 @@ config GENERIC_BUG ...@@ -101,6 +101,14 @@ config GENERIC_BUG
default y default y
depends on BUG depends on BUG
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
source "init/Kconfig" source "init/Kconfig"
......
...@@ -34,6 +34,14 @@ config GENERIC_HARDIRQS ...@@ -34,6 +34,14 @@ config GENERIC_HARDIRQS
bool bool
default y default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
source "init/Kconfig" source "init/Kconfig"
menu "Processor type and features" menu "Processor type and features"
......
...@@ -124,7 +124,7 @@ static int mthca_query_device(struct ib_device *ibdev, ...@@ -124,7 +124,7 @@ static int mthca_query_device(struct ib_device *ibdev,
props->max_map_per_fmr = 255; props->max_map_per_fmr = 255;
else else
props->max_map_per_fmr = props->max_map_per_fmr =
(1 << (32 - long_log2(mdev->limits.num_mpts))) - 1; (1 << (32 - ilog2(mdev->limits.num_mpts))) - 1;
err = 0; err = 0;
out: out:
...@@ -816,7 +816,7 @@ static int mthca_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *uda ...@@ -816,7 +816,7 @@ static int mthca_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *uda
lkey = ucmd.lkey; lkey = ucmd.lkey;
} }
ret = mthca_RESIZE_CQ(dev, cq->cqn, lkey, long_log2(entries), &status); ret = mthca_RESIZE_CQ(dev, cq->cqn, lkey, ilog2(entries), &status);
if (status) if (status)
ret = -EINVAL; ret = -EINVAL;
......
...@@ -636,11 +636,11 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, ...@@ -636,11 +636,11 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
if (mthca_is_memfree(dev)) { if (mthca_is_memfree(dev)) {
if (qp->rq.max) if (qp->rq.max)
qp_context->rq_size_stride = long_log2(qp->rq.max) << 3; qp_context->rq_size_stride = ilog2(qp->rq.max) << 3;
qp_context->rq_size_stride |= qp->rq.wqe_shift - 4; qp_context->rq_size_stride |= qp->rq.wqe_shift - 4;
if (qp->sq.max) if (qp->sq.max)
qp_context->sq_size_stride = long_log2(qp->sq.max) << 3; qp_context->sq_size_stride = ilog2(qp->sq.max) << 3;
qp_context->sq_size_stride |= qp->sq.wqe_shift - 4; qp_context->sq_size_stride |= qp->sq.wqe_shift - 4;
} }
......
...@@ -120,7 +120,7 @@ static void mthca_arbel_init_srq_context(struct mthca_dev *dev, ...@@ -120,7 +120,7 @@ static void mthca_arbel_init_srq_context(struct mthca_dev *dev,
memset(context, 0, sizeof *context); memset(context, 0, sizeof *context);
logsize = long_log2(srq->max); logsize = ilog2(srq->max);
context->state_logsize_srqn = cpu_to_be32(logsize << 24 | srq->srqn); context->state_logsize_srqn = cpu_to_be32(logsize << 24 | srq->srqn);
context->lkey = cpu_to_be32(srq->mr.ibmr.lkey); context->lkey = cpu_to_be32(srq->mr.ibmr.lkey);
context->db_index = cpu_to_be32(srq->db_index); context->db_index = cpu_to_be32(srq->db_index);
...@@ -213,7 +213,7 @@ int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd, ...@@ -213,7 +213,7 @@ int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd,
if (!mthca_is_memfree(dev) && (ds > dev->limits.max_desc_sz)) if (!mthca_is_memfree(dev) && (ds > dev->limits.max_desc_sz))
return -EINVAL; return -EINVAL;
srq->wqe_shift = long_log2(ds); srq->wqe_shift = ilog2(ds);
srq->srqn = mthca_alloc(&dev->srq_table.alloc); srq->srqn = mthca_alloc(&dev->srq_table.alloc);
if (srq->srqn == -1) if (srq->srqn == -1)
......
...@@ -114,7 +114,7 @@ int iser_start_rdma_unaligned_sg(struct iscsi_iser_cmd_task *iser_ctask, ...@@ -114,7 +114,7 @@ int iser_start_rdma_unaligned_sg(struct iscsi_iser_cmd_task *iser_ctask,
if (cmd_data_len > ISER_KMALLOC_THRESHOLD) if (cmd_data_len > ISER_KMALLOC_THRESHOLD)
mem = (void *)__get_free_pages(GFP_NOIO, mem = (void *)__get_free_pages(GFP_NOIO,
long_log2(roundup_pow_of_two(cmd_data_len)) - PAGE_SHIFT); ilog2(roundup_pow_of_two(cmd_data_len)) - PAGE_SHIFT);
else else
mem = kmalloc(cmd_data_len, GFP_NOIO); mem = kmalloc(cmd_data_len, GFP_NOIO);
...@@ -211,7 +211,7 @@ void iser_finalize_rdma_unaligned_sg(struct iscsi_iser_cmd_task *iser_ctask, ...@@ -211,7 +211,7 @@ void iser_finalize_rdma_unaligned_sg(struct iscsi_iser_cmd_task *iser_ctask,
if (cmd_data_len > ISER_KMALLOC_THRESHOLD) if (cmd_data_len > ISER_KMALLOC_THRESHOLD)
free_pages((unsigned long)mem_copy->copy_buf, free_pages((unsigned long)mem_copy->copy_buf,
long_log2(roundup_pow_of_two(cmd_data_len)) - PAGE_SHIFT); ilog2(roundup_pow_of_two(cmd_data_len)) - PAGE_SHIFT);
else else
kfree(mem_copy->copy_buf); kfree(mem_copy->copy_buf);
......
...@@ -220,7 +220,7 @@ static int crypt_iv_benbi_ctr(struct crypt_config *cc, struct dm_target *ti, ...@@ -220,7 +220,7 @@ static int crypt_iv_benbi_ctr(struct crypt_config *cc, struct dm_target *ti,
const char *opts) const char *opts)
{ {
unsigned int bs = crypto_blkcipher_blocksize(cc->tfm); unsigned int bs = crypto_blkcipher_blocksize(cc->tfm);
int log = long_log2(bs); int log = ilog2(bs);
/* we need to calculate how far we must shift the sector count /* we need to calculate how far we must shift the sector count
* to get the cipher block count, we use this shift in _gen */ * to get the cipher block count, we use this shift in _gen */
......
...@@ -387,7 +387,7 @@ static void tifm_sd_prepare_data(struct tifm_sd *card, struct mmc_command *cmd) ...@@ -387,7 +387,7 @@ static void tifm_sd_prepare_data(struct tifm_sd *card, struct mmc_command *cmd)
writel(TIFM_FIFO_INT_SETALL, writel(TIFM_FIFO_INT_SETALL,
sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR); sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
writel(long_log2(cmd->data->blksz) - 2, writel(ilog2(cmd->data->blksz) - 2,
sock->addr + SOCK_FIFO_PAGE_SIZE); sock->addr + SOCK_FIFO_PAGE_SIZE);
writel(TIFM_FIFO_ENABLE, sock->addr + SOCK_FIFO_CONTROL); writel(TIFM_FIFO_ENABLE, sock->addr + SOCK_FIFO_CONTROL);
writel(TIFM_FIFO_INTMASK, sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET); writel(TIFM_FIFO_INTMASK, sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET);
......
...@@ -597,8 +597,6 @@ static int ext2_check_descriptors (struct super_block * sb) ...@@ -597,8 +597,6 @@ static int ext2_check_descriptors (struct super_block * sb)
return 1; return 1;
} }
#define log2(n) ffz(~(n))
/* /*
* Maximal file size. There is a direct, and {,double-,triple-}indirect * Maximal file size. There is a direct, and {,double-,triple-}indirect
* block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks. * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
...@@ -834,9 +832,9 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent) ...@@ -834,9 +832,9 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
sbi->s_sbh = bh; sbi->s_sbh = bh;
sbi->s_mount_state = le16_to_cpu(es->s_state); sbi->s_mount_state = le16_to_cpu(es->s_state);
sbi->s_addr_per_block_bits = sbi->s_addr_per_block_bits =
log2 (EXT2_ADDR_PER_BLOCK(sb)); ilog2 (EXT2_ADDR_PER_BLOCK(sb));
sbi->s_desc_per_block_bits = sbi->s_desc_per_block_bits =
log2 (EXT2_DESC_PER_BLOCK(sb)); ilog2 (EXT2_DESC_PER_BLOCK(sb));
if (sb->s_magic != EXT2_SUPER_MAGIC) if (sb->s_magic != EXT2_SUPER_MAGIC)
goto cantfind_ext2; goto cantfind_ext2;
......
...@@ -1347,8 +1347,6 @@ static void ext3_orphan_cleanup (struct super_block * sb, ...@@ -1347,8 +1347,6 @@ static void ext3_orphan_cleanup (struct super_block * sb,
sb->s_flags = s_flags; /* Restore MS_RDONLY status */ sb->s_flags = s_flags; /* Restore MS_RDONLY status */
} }
#define log2(n) ffz(~(n))
/* /*
* Maximal file size. There is a direct, and {,double-,triple-}indirect * Maximal file size. There is a direct, and {,double-,triple-}indirect
* block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks. * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
...@@ -1597,8 +1595,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) ...@@ -1597,8 +1595,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
sbi->s_desc_per_block = blocksize / sizeof(struct ext3_group_desc); sbi->s_desc_per_block = blocksize / sizeof(struct ext3_group_desc);
sbi->s_sbh = bh; sbi->s_sbh = bh;
sbi->s_mount_state = le16_to_cpu(es->s_state); sbi->s_mount_state = le16_to_cpu(es->s_state);
sbi->s_addr_per_block_bits = log2(EXT3_ADDR_PER_BLOCK(sb)); sbi->s_addr_per_block_bits = ilog2(EXT3_ADDR_PER_BLOCK(sb));
sbi->s_desc_per_block_bits = log2(EXT3_DESC_PER_BLOCK(sb)); sbi->s_desc_per_block_bits = ilog2(EXT3_DESC_PER_BLOCK(sb));
for (i=0; i < 4; i++) for (i=0; i < 4; i++)
sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]); sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
sbi->s_def_hash_version = es->s_def_hash_version; sbi->s_def_hash_version = es->s_def_hash_version;
......
...@@ -256,6 +256,50 @@ int __ffs(unsigned long x) ...@@ -256,6 +256,50 @@ int __ffs(unsigned long x)
return 31 - bit; return 31 - bit;
} }
/*
* special slimline version of fls() for calculating ilog2_u32()
* - note: no protection against n == 0
*/
#define ARCH_HAS_ILOG2_U32
static inline __attribute__((const))
int __ilog2_u32(u32 n)
{
int bit;
asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n));
return 31 - bit;
}
/*
* special slimline version of fls64() for calculating ilog2_u64()
* - note: no protection against n == 0
*/
#define ARCH_HAS_ILOG2_U64
static inline __attribute__((const))
int __ilog2_u64(u64 n)
{
union {
u64 ll;
struct { u32 h, l; };
} _;
int bit, x, y;
_.ll = n;
asm(" subcc %3,gr0,gr0,icc0 \n"
" ckeq icc0,cc4 \n"
" cscan.p %3,gr0,%0 ,cc4,0 \n"
" setlos #63,%1 \n"
" cscan.p %4,gr0,%0 ,cc4,1 \n"
" setlos #31,%2 \n"
" csub.p %1,%0,%0 ,cc4,0 \n"
" csub %2,%0,%0 ,cc4,1 \n"
: "=&r"(bit), "=r"(x), "=r"(y)
: "0r"(_.h), "r"(_.l)
: "icc0", "cc4"
);
return bit;
}
#include <asm-generic/bitops/sched.h> #include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/hweight.h> #include <asm-generic/bitops/hweight.h>
......
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/compiler.h> #include <linux/compiler.h>
#include <linux/bitops.h> #include <linux/bitops.h>
#include <linux/log2.h>
#include <asm/byteorder.h> #include <asm/byteorder.h>
#include <asm/bug.h> #include <asm/bug.h>
...@@ -157,14 +158,6 @@ static inline int printk(const char *s, ...) { return 0; } ...@@ -157,14 +158,6 @@ static inline int printk(const char *s, ...) { return 0; }
unsigned long int_sqrt(unsigned long); unsigned long int_sqrt(unsigned long);
static inline int __attribute_pure__ long_log2(unsigned long x)
{
int r = 0;
for (x >>= 1; x > 0; x >>= 1)
r++;
return r;
}
static inline unsigned long static inline unsigned long
__attribute_const__ roundup_pow_of_two(unsigned long x) __attribute_const__ roundup_pow_of_two(unsigned long x)
{ {
......
/* Integer base 2 logarithm calculation
*
* Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _LINUX_LOG2_H
#define _LINUX_LOG2_H
#include <linux/types.h>
#include <linux/bitops.h>
/*
* deal with unrepresentable constant logarithms
*/
extern __attribute__((const, noreturn))
int ____ilog2_NaN(void);
/*
* non-constant log of base 2 calculators
* - the arch may override these in asm/bitops.h if they can be implemented
* more efficiently than using fls() and fls64()
* - the arch is not required to handle n==0 if implementing the fallback
*/
#ifndef CONFIG_ARCH_HAS_ILOG2_U32
static inline __attribute__((const))
int __ilog2_u32(u32 n)
{
return fls(n) - 1;
}
#endif
#ifndef CONFIG_ARCH_HAS_ILOG2_U64
static inline __attribute__((const))
int __ilog2_u64(u64 n)
{
return fls64(n) - 1;
}
#endif
/**
* ilog2 - log of base 2 of 32-bit or a 64-bit unsigned value
* @n - parameter
*
* constant-capable log of base 2 calculation
* - this can be used to initialise global variables from constant data, hence
* the massive ternary operator construction
*
* selects the appropriately-sized optimised version depending on sizeof(n)
*/
#define ilog2(n) \
( \
__builtin_constant_p(n) ? ( \
(n) < 1 ? ____ilog2_NaN() : \
(n) & (1ULL << 63) ? 63 : \
(n) & (1ULL << 62) ? 62 : \
(n) & (1ULL << 61) ? 61 : \
(n) & (1ULL << 60) ? 60 : \
(n) & (1ULL << 59) ? 59 : \
(n) & (1ULL << 58) ? 58 : \
(n) & (1ULL << 57) ? 57 : \
(n) & (1ULL << 56) ? 56 : \
(n) & (1ULL << 55) ? 55 : \
(n) & (1ULL << 54) ? 54 : \
(n) & (1ULL << 53) ? 53 : \
(n) & (1ULL << 52) ? 52 : \
(n) & (1ULL << 51) ? 51 : \
(n) & (1ULL << 50) ? 50 : \
(n) & (1ULL << 49) ? 49 : \
(n) & (1ULL << 48) ? 48 : \
(n) & (1ULL << 47) ? 47 : \
(n) & (1ULL << 46) ? 46 : \
(n) & (1ULL << 45) ? 45 : \
(n) & (1ULL << 44) ? 44 : \
(n) & (1ULL << 43) ? 43 : \
(n) & (1ULL << 42) ? 42 : \
(n) & (1ULL << 41) ? 41 : \
(n) & (1ULL << 40) ? 40 : \
(n) & (1ULL << 39) ? 39 : \
(n) & (1ULL << 38) ? 38 : \
(n) & (1ULL << 37) ? 37 : \
(n) & (1ULL << 36) ? 36 : \
(n) & (1ULL << 35) ? 35 : \
(n) & (1ULL << 34) ? 34 : \
(n) & (1ULL << 33) ? 33 : \
(n) & (1ULL << 32) ? 32 : \
(n) & (1ULL << 31) ? 31 : \
(n) & (1ULL << 30) ? 30 : \
(n) & (1ULL << 29) ? 29 : \
(n) & (1ULL << 28) ? 28 : \
(n) & (1ULL << 27) ? 27 : \
(n) & (1ULL << 26) ? 26 : \
(n) & (1ULL << 25) ? 25 : \
(n) & (1ULL << 24) ? 24 : \
(n) & (1ULL << 23) ? 23 : \
(n) & (1ULL << 22) ? 22 : \
(n) & (1ULL << 21) ? 21 : \
(n) & (1ULL << 20) ? 20 : \
(n) & (1ULL << 19) ? 19 : \
(n) & (1ULL << 18) ? 18 : \
(n) & (1ULL << 17) ? 17 : \
(n) & (1ULL << 16) ? 16 : \
(n) & (1ULL << 15) ? 15 : \
(n) & (1ULL << 14) ? 14 : \
(n) & (1ULL << 13) ? 13 : \
(n) & (1ULL << 12) ? 12 : \
(n) & (1ULL << 11) ? 11 : \
(n) & (1ULL << 10) ? 10 : \
(n) & (1ULL << 9) ? 9 : \
(n) & (1ULL << 8) ? 8 : \
(n) & (1ULL << 7) ? 7 : \
(n) & (1ULL << 6) ? 6 : \
(n) & (1ULL << 5) ? 5 : \
(n) & (1ULL << 4) ? 4 : \
(n) & (1ULL << 3) ? 3 : \
(n) & (1ULL << 2) ? 2 : \
(n) & (1ULL << 1) ? 1 : \
(n) & (1ULL << 0) ? 0 : \
____ilog2_NaN() \
) : \
(sizeof(n) <= 4) ? \
__ilog2_u32(n) : \
__ilog2_u64(n) \
)
#endif /* _LINUX_LOG2_H */
...@@ -3244,7 +3244,7 @@ void *__init alloc_large_system_hash(const char *tablename, ...@@ -3244,7 +3244,7 @@ void *__init alloc_large_system_hash(const char *tablename,
if (numentries > max) if (numentries > max)
numentries = max; numentries = max;
log2qty = long_log2(numentries); log2qty = ilog2(numentries);
do { do {
size = bucketsize << log2qty; size = bucketsize << log2qty;
...@@ -3266,7 +3266,7 @@ void *__init alloc_large_system_hash(const char *tablename, ...@@ -3266,7 +3266,7 @@ void *__init alloc_large_system_hash(const char *tablename,
printk("%s hash table entries: %d (order: %d, %lu bytes)\n", printk("%s hash table entries: %d (order: %d, %lu bytes)\n",
tablename, tablename,
(1U << log2qty), (1U << log2qty),
long_log2(size) - PAGE_SHIFT, ilog2(size) - PAGE_SHIFT,
size); size);
if (_hash_shift) if (_hash_shift)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment