Commit f0f3680e authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac

Pull EDAC fixes from Mauro Carvalho Chehab:
 "A series of EDAC driver fixes.  It also has one core fix at the
  documentation, and a rename patch, fixing the name of the struct that
  contains the rank information."

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  edac: rename channel_info to rank_info
  i5400_edac: Avoid calling pci_put_device() twice
  edac: i5100 ack error detection register after each read
  edac: i5100 fix erroneous define for M1Err
  edac: sb_edac: Fix a wrong value setting for the previous value
  edac: sb_edac: Fix a INTERLEAVE_MODE() misuse
  edac: sb_edac: Let the driver depend on PCI_MMCONFIG
  edac: Improve the comments to better describe the memory concepts
  edac/ppc4xx_edac: Fix compilation
  Fix sb_edac compilation with 32 bits kernels
parents 61e5191c a4b4be3f
......@@ -215,7 +215,7 @@ config EDAC_I7300
config EDAC_SBRIDGE
tristate "Intel Sandy-Bridge Integrated MC"
depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL
depends on EXPERIMENTAL
depends on PCI_MMCONFIG && EXPERIMENTAL
help
Support for error detection and correction the Intel
Sandy Bridge Integrated Memory Controller.
......
......@@ -39,7 +39,7 @@ static LIST_HEAD(mc_devices);
#ifdef CONFIG_EDAC_DEBUG
static void edac_mc_dump_channel(struct channel_info *chan)
static void edac_mc_dump_channel(struct rank_info *chan)
{
debugf4("\tchannel = %p\n", chan);
debugf4("\tchannel->chan_idx = %d\n", chan->chan_idx);
......@@ -156,7 +156,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows,
{
struct mem_ctl_info *mci;
struct csrow_info *csi, *csrow;
struct channel_info *chi, *chp, *chan;
struct rank_info *chi, *chp, *chan;
void *pvt;
unsigned size;
int row, chn;
......@@ -181,7 +181,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows,
* rather than an imaginary chunk of memory located at address 0.
*/
csi = (struct csrow_info *)(((char *)mci) + ((unsigned long)csi));
chi = (struct channel_info *)(((char *)mci) + ((unsigned long)chi));
chi = (struct rank_info *)(((char *)mci) + ((unsigned long)chi));
pvt = sz_pvt ? (((char *)mci) + ((unsigned long)pvt)) : NULL;
/* setup index and various internal pointers */
......
......@@ -49,7 +49,7 @@
#define I5100_FERR_NF_MEM_M6ERR_MASK (1 << 6)
#define I5100_FERR_NF_MEM_M5ERR_MASK (1 << 5)
#define I5100_FERR_NF_MEM_M4ERR_MASK (1 << 4)
#define I5100_FERR_NF_MEM_M1ERR_MASK 1
#define I5100_FERR_NF_MEM_M1ERR_MASK (1 << 1)
#define I5100_FERR_NF_MEM_ANY_MASK \
(I5100_FERR_NF_MEM_M16ERR_MASK | \
I5100_FERR_NF_MEM_M15ERR_MASK | \
......@@ -535,23 +535,20 @@ static void i5100_read_log(struct mem_ctl_info *mci, int chan,
static void i5100_check_error(struct mem_ctl_info *mci)
{
struct i5100_priv *priv = mci->pvt_info;
u32 dw;
u32 dw, dw2;
pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw);
if (i5100_ferr_nf_mem_any(dw)) {
u32 dw2;
pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2);
if (dw2)
pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM,
dw2);
pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw);
i5100_read_log(mci, i5100_ferr_nf_mem_chan_indx(dw),
i5100_ferr_nf_mem_any(dw),
i5100_nerr_nf_mem_any(dw2));
pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM, dw2);
}
pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw);
}
/* The i5100 chipset will scrub the entire memory once, then
......
......@@ -735,7 +735,7 @@ static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx)
/* Attempt to 'get' the MCH register we want */
pdev = NULL;
while (!pvt->branchmap_werrors || !pvt->fsb_error_regs) {
while (1) {
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5400_ERR, pdev);
if (!pdev) {
......@@ -743,23 +743,42 @@ static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx)
i5400_printk(KERN_ERR,
"'system address,Process Bus' "
"device not found:"
"vendor 0x%x device 0x%x ERR funcs "
"vendor 0x%x device 0x%x ERR func 1 "
"(broken BIOS?)\n",
PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5400_ERR);
goto error;
return -ENODEV;
}
/* Store device 16 funcs 1 and 2 */
switch (PCI_FUNC(pdev->devfn)) {
case 1:
pvt->branchmap_werrors = pdev;
break;
case 2:
pvt->fsb_error_regs = pdev;
/* Store device 16 func 1 */
if (PCI_FUNC(pdev->devfn) == 1)
break;
}
pvt->branchmap_werrors = pdev;
pdev = NULL;
while (1) {
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5400_ERR, pdev);
if (!pdev) {
/* End of list, leave */
i5400_printk(KERN_ERR,
"'system address,Process Bus' "
"device not found:"
"vendor 0x%x device 0x%x ERR func 2 "
"(broken BIOS?)\n",
PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5400_ERR);
pci_dev_put(pvt->branchmap_werrors);
return -ENODEV;
}
/* Store device 16 func 2 */
if (PCI_FUNC(pdev->devfn) == 2)
break;
}
pvt->fsb_error_regs = pdev;
debugf1("System Address, processor bus- PCI Bus ID: %s %x:%x\n",
pci_name(pvt->system_address),
......@@ -778,7 +797,10 @@ static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx)
"MC: 'BRANCH 0' device not found:"
"vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n",
PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_FBD0);
goto error;
pci_dev_put(pvt->fsb_error_regs);
pci_dev_put(pvt->branchmap_werrors);
return -ENODEV;
}
/* If this device claims to have more than 2 channels then
......@@ -796,14 +818,14 @@ static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx)
"(broken BIOS?)\n",
PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5400_FBD1);
goto error;
pci_dev_put(pvt->branch_0);
pci_dev_put(pvt->fsb_error_regs);
pci_dev_put(pvt->branchmap_werrors);
return -ENODEV;
}
return 0;
error:
i5400_put_devices(mci);
return -ENODEV;
}
/*
......
......@@ -184,7 +184,7 @@ struct ppc4xx_ecc_status {
/* Function Prototypes */
static int ppc4xx_edac_probe(struct platform_device *device)
static int ppc4xx_edac_probe(struct platform_device *device);
static int ppc4xx_edac_remove(struct platform_device *device);
/* Global Variables */
......@@ -1068,7 +1068,7 @@ ppc4xx_edac_mc_init(struct mem_ctl_info *mci,
mci->mod_name = PPC4XX_EDAC_MODULE_NAME;
mci->mod_ver = PPC4XX_EDAC_MODULE_REVISION;
mci->ctl_name = match->compatible,
mci->ctl_name = ppc4xx_edac_match->compatible,
mci->dev_name = np->full_name;
/* Initialize callbacks */
......
......@@ -20,6 +20,7 @@
#include <linux/mmzone.h>
#include <linux/smp.h>
#include <linux/bitmap.h>
#include <linux/math64.h>
#include <asm/processor.h>
#include <asm/mce.h>
......@@ -670,6 +671,7 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
u32 reg;
u64 limit, prv = 0;
u64 tmp_mb;
u32 mb, kb;
u32 rir_way;
/*
......@@ -682,8 +684,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
pvt->tolm = GET_TOLM(reg);
tmp_mb = (1 + pvt->tolm) >> 20;
debugf0("TOLM: %Lu.%03Lu GB (0x%016Lx)\n",
tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tolm);
mb = div_u64_rem(tmp_mb, 1000, &kb);
debugf0("TOLM: %u.%03u GB (0x%016Lx)\n",
mb, kb, (u64)pvt->tolm);
/* Address range is already 45:25 */
pci_read_config_dword(pvt->pci_sad1, TOHM,
......@@ -691,8 +694,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
pvt->tohm = GET_TOHM(reg);
tmp_mb = (1 + pvt->tohm) >> 20;
debugf0("TOHM: %Lu.%03Lu GB (0x%016Lx)",
tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tohm);
mb = div_u64_rem(tmp_mb, 1000, &kb);
debugf0("TOHM: %u.%03u GB (0x%016Lx)",
mb, kb, (u64)pvt->tohm);
/*
* Step 2) Get SAD range and SAD Interleave list
......@@ -714,10 +718,11 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
break;
tmp_mb = (limit + 1) >> 20;
debugf0("SAD#%d %s up to %Lu.%03Lu GB (0x%016Lx) %s reg=0x%08x\n",
mb = div_u64_rem(tmp_mb, 1000, &kb);
debugf0("SAD#%d %s up to %u.%03u GB (0x%016Lx) %s reg=0x%08x\n",
n_sads,
get_dram_attr(reg),
tmp_mb / 1000, tmp_mb % 1000,
mb, kb,
((u64)tmp_mb) << 20L,
INTERLEAVE_MODE(reg) ? "Interleave: 8:6" : "Interleave: [8:6]XOR[18:16]",
reg);
......@@ -747,8 +752,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
break;
tmp_mb = (limit + 1) >> 20;
debugf0("TAD#%d: up to %Lu.%03Lu GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
n_tads, tmp_mb / 1000, tmp_mb % 1000,
mb = div_u64_rem(tmp_mb, 1000, &kb);
debugf0("TAD#%d: up to %u.%03u GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
n_tads, mb, kb,
((u64)tmp_mb) << 20L,
(u32)TAD_SOCK(reg),
(u32)TAD_CH(reg),
......@@ -757,7 +763,7 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
(u32)TAD_TGT2(reg),
(u32)TAD_TGT3(reg),
reg);
prv = tmp_mb;
prv = limit;
}
/*
......@@ -771,9 +777,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
tad_ch_nilv_offset[j],
&reg);
tmp_mb = TAD_OFFSET(reg) >> 20;
debugf0("TAD CH#%d, offset #%d: %Lu.%03Lu GB (0x%016Lx), reg=0x%08x\n",
mb = div_u64_rem(tmp_mb, 1000, &kb);
debugf0("TAD CH#%d, offset #%d: %u.%03u GB (0x%016Lx), reg=0x%08x\n",
i, j,
tmp_mb / 1000, tmp_mb % 1000,
mb, kb,
((u64)tmp_mb) << 20L,
reg);
}
......@@ -795,9 +802,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
tmp_mb = RIR_LIMIT(reg) >> 20;
rir_way = 1 << RIR_WAY(reg);
debugf0("CH#%d RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d, reg=0x%08x\n",
mb = div_u64_rem(tmp_mb, 1000, &kb);
debugf0("CH#%d RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d, reg=0x%08x\n",
i, j,
tmp_mb / 1000, tmp_mb % 1000,
mb, kb,
((u64)tmp_mb) << 20L,
rir_way,
reg);
......@@ -808,9 +816,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
&reg);
tmp_mb = RIR_OFFSET(reg) << 6;
debugf0("CH#%d RIR#%d INTL#%d, offset %Lu.%03Lu GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
mb = div_u64_rem(tmp_mb, 1000, &kb);
debugf0("CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
i, j, k,
tmp_mb / 1000, tmp_mb % 1000,
mb, kb,
((u64)tmp_mb) << 20L,
(u32)RIR_RNK_TGT(reg),
reg);
......@@ -848,6 +857,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
u8 ch_way,sck_way;
u32 tad_offset;
u32 rir_way;
u32 mb, kb;
u64 ch_addr, offset, limit, prv = 0;
......@@ -858,7 +868,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
* range (e. g. VGA addresses). It is unlikely, however, that the
* memory controller would generate an error on that range.
*/
if ((addr > (u64) pvt->tolm) && (addr < (1L << 32))) {
if ((addr > (u64) pvt->tolm) && (addr < (1LL << 32))) {
sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr);
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
......@@ -913,7 +923,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
addr,
limit,
sad_way + 7,
INTERLEAVE_MODE(reg) ? "" : "XOR[18:16]");
interleave_mode ? "" : "XOR[18:16]");
if (interleave_mode)
idx = ((addr >> 6) ^ (addr >> 16)) & 7;
else
......@@ -1053,7 +1063,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
ch_addr = addr & 0x7f;
/* Remove socket wayness and remove 6 bits */
addr >>= 6;
addr /= sck_xch;
addr = div_u64(addr, sck_xch);
#if 0
/* Divide by channel way */
addr = addr / ch_way;
......@@ -1073,10 +1083,10 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
continue;
limit = RIR_LIMIT(reg);
debugf0("RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d\n",
mb = div_u64_rem(limit >> 20, 1000, &kb);
debugf0("RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d\n",
n_rir,
(limit >> 20) / 1000, (limit >> 20) % 1000,
mb, kb,
limit,
1 << RIR_WAY(reg));
if (ch_addr <= limit)
......
......@@ -70,25 +70,64 @@ enum dev_type {
#define DEV_FLAG_X32 BIT(DEV_X32)
#define DEV_FLAG_X64 BIT(DEV_X64)
/* memory types */
/**
* enum mem_type - memory types. For a more detailed reference, please see
* http://en.wikipedia.org/wiki/DRAM
*
* @MEM_EMPTY Empty csrow
* @MEM_RESERVED: Reserved csrow type
* @MEM_UNKNOWN: Unknown csrow type
* @MEM_FPM: FPM - Fast Page Mode, used on systems up to 1995.
* @MEM_EDO: EDO - Extended data out, used on systems up to 1998.
* @MEM_BEDO: BEDO - Burst Extended data out, an EDO variant.
* @MEM_SDR: SDR - Single data rate SDRAM
* http://en.wikipedia.org/wiki/Synchronous_dynamic_random-access_memory
* They use 3 pins for chip select: Pins 0 and 2 are
* for rank 0; pins 1 and 3 are for rank 1, if the memory
* is dual-rank.
* @MEM_RDR: Registered SDR SDRAM
* @MEM_DDR: Double data rate SDRAM
* http://en.wikipedia.org/wiki/DDR_SDRAM
* @MEM_RDDR: Registered Double data rate SDRAM
* This is a variant of the DDR memories.
* A registered memory has a buffer inside it, hiding
* part of the memory details to the memory controller.
* @MEM_RMBS: Rambus DRAM, used on a few Pentium III/IV controllers.
* @MEM_DDR2: DDR2 RAM, as described at JEDEC JESD79-2F.
* Those memories are labed as "PC2-" instead of "PC" to
* differenciate from DDR.
* @MEM_FB_DDR2: Fully-Buffered DDR2, as described at JEDEC Std No. 205
* and JESD206.
* Those memories are accessed per DIMM slot, and not by
* a chip select signal.
* @MEM_RDDR2: Registered DDR2 RAM
* This is a variant of the DDR2 memories.
* @MEM_XDR: Rambus XDR
* It is an evolution of the original RAMBUS memories,
* created to compete with DDR2. Weren't used on any
* x86 arch, but cell_edac PPC memory controller uses it.
* @MEM_DDR3: DDR3 RAM
* @MEM_RDDR3: Registered DDR3 RAM
* This is a variant of the DDR3 memories.
*/
enum mem_type {
MEM_EMPTY = 0, /* Empty csrow */
MEM_RESERVED, /* Reserved csrow type */
MEM_UNKNOWN, /* Unknown csrow type */
MEM_FPM, /* Fast page mode */
MEM_EDO, /* Extended data out */
MEM_BEDO, /* Burst Extended data out */
MEM_SDR, /* Single data rate SDRAM */
MEM_RDR, /* Registered single data rate SDRAM */
MEM_DDR, /* Double data rate SDRAM */
MEM_RDDR, /* Registered Double data rate SDRAM */
MEM_RMBS, /* Rambus DRAM */
MEM_DDR2, /* DDR2 RAM */
MEM_FB_DDR2, /* fully buffered DDR2 */
MEM_RDDR2, /* Registered DDR2 RAM */
MEM_XDR, /* Rambus XDR */
MEM_DDR3, /* DDR3 RAM */
MEM_RDDR3, /* Registered DDR3 RAM */
MEM_EMPTY = 0,
MEM_RESERVED,
MEM_UNKNOWN,
MEM_FPM,
MEM_EDO,
MEM_BEDO,
MEM_SDR,
MEM_RDR,
MEM_DDR,
MEM_RDDR,
MEM_RMBS,
MEM_DDR2,
MEM_FB_DDR2,
MEM_RDDR2,
MEM_XDR,
MEM_DDR3,
MEM_RDDR3,
};
#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
......@@ -166,8 +205,9 @@ enum scrub_type {
#define OP_OFFLINE 0x300
/*
* There are several things to be aware of that aren't at all obvious:
* Concepts used at the EDAC subsystem
*
* There are several things to be aware of that aren't at all obvious:
*
* SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
*
......@@ -176,36 +216,61 @@ enum scrub_type {
* creating a common ground for discussion, terms and their definitions
* will be established.
*
* Memory devices: The individual chip on a memory stick. These devices
* commonly output 4 and 8 bits each. Grouping several
* of these in parallel provides 64 bits which is common
* for a memory stick.
* Memory devices: The individual DRAM chips on a memory stick. These
* devices commonly output 4 and 8 bits each (x4, x8).
* Grouping several of these in parallel provides the
* number of bits that the memory controller expects:
* typically 72 bits, in order to provide 64 bits +
* 8 bits of ECC data.
*
* Memory Stick: A printed circuit board that aggregates multiple
* memory devices in parallel. This is the atomic
* memory component that is purchaseable by Joe consumer
* and loaded into a memory socket.
* memory devices in parallel. In general, this is the
* Field Replaceable Unit (FRU) which gets replaced, in
* the case of excessive errors. Most often it is also
* called DIMM (Dual Inline Memory Module).
*
* Memory Socket: A physical connector on the motherboard that accepts
* a single memory stick. Also called as "slot" on several
* datasheets.
*
* Socket: A physical connector on the motherboard that accepts
* a single memory stick.
* Channel: A memory controller channel, responsible to communicate
* with a group of DIMMs. Each channel has its own
* independent control (command) and data bus, and can
* be used independently or grouped with other channels.
*
* Channel: Set of memory devices on a memory stick that must be
* grouped in parallel with one or more additional
* channels from other memory sticks. This parallel
* grouping of the output from multiple channels are
* necessary for the smallest granularity of memory access.
* Some memory controllers are capable of single channel -
* which means that memory sticks can be loaded
* individually. Other memory controllers are only
* capable of dual channel - which means that memory
* sticks must be loaded as pairs (see "socket set").
* Branch: It is typically the highest hierarchy on a
* Fully-Buffered DIMM memory controller.
* Typically, it contains two channels.
* Two channels at the same branch can be used in single
* mode or in lockstep mode.
* When lockstep is enabled, the cacheline is doubled,
* but it generally brings some performance penalty.
* Also, it is generally not possible to point to just one
* memory stick when an error occurs, as the error
* correction code is calculated using two DIMMs instead
* of one. Due to that, it is capable of correcting more
* errors than on single mode.
*
* Chip-select row: All of the memory devices that are selected together.
* for a single, minimum grain of memory access.
* This selects all of the parallel memory devices across
* all of the parallel channels. Common chip-select rows
* for single channel are 64 bits, for dual channel 128
* bits.
* Single-channel: The data accessed by the memory controller is contained
* into one dimm only. E. g. if the data is 64 bits-wide,
* the data flows to the CPU using one 64 bits parallel
* access.
* Typically used with SDR, DDR, DDR2 and DDR3 memories.
* FB-DIMM and RAMBUS use a different concept for channel,
* so this concept doesn't apply there.
*
* Double-channel: The data size accessed by the memory controller is
* interlaced into two dimms, accessed at the same time.
* E. g. if the DIMM is 64 bits-wide (72 bits with ECC),
* the data flows to the CPU using a 128 bits parallel
* access.
*
* Chip-select row: This is the name of the DRAM signal used to select the
* DRAM ranks to be accessed. Common chip-select rows for
* single channel are 64 bits, for dual channel 128 bits.
* It may not be visible by the memory controller, as some
* DIMM types have a memory buffer that can hide direct
* access to it from the Memory Controller.
*
* Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory.
* Motherboards commonly drive two chip-select pins to
......@@ -218,8 +283,8 @@ enum scrub_type {
*
* Double-sided stick: DEPRECATED TERM, see Double-Ranked stick.
* A double-sided stick has two chip-select rows which
* access different sets of memory devices. The two
* rows cannot be accessed concurrently. "Double-sided"
* access different sets of memory devices. The two
* rows cannot be accessed concurrently. "Double-sided"
* is irrespective of the memory devices being mounted
* on both sides of the memory stick.
*
......@@ -247,10 +312,22 @@ enum scrub_type {
* PS - I enjoyed writing all that about as much as you enjoyed reading it.
*/
struct channel_info {
int chan_idx; /* channel index */
u32 ce_count; /* Correctable Errors for this CHANNEL */
char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */
/**
* struct rank_info - contains the information for one DIMM rank
*
* @chan_idx: channel number where the rank is (typically, 0 or 1)
* @ce_count: number of correctable errors for this rank
* @label: DIMM label. Different ranks for the same DIMM should be
* filled, on userspace, with the same label.
* FIXME: The core currently won't enforce it.
* @csrow: A pointer to the chip select row structure (the parent
* structure). The location of the rank is given by
* the (csrow->csrow_idx, chan_idx) vector.
*/
struct rank_info {
int chan_idx;
u32 ce_count;
char label[EDAC_MC_LABEL_LEN + 1];
struct csrow_info *csrow; /* the parent */
};
......@@ -274,7 +351,7 @@ struct csrow_info {
/* channel information for this csrow */
u32 nr_channels;
struct channel_info *channels;
struct rank_info *channels;
};
struct mcidev_sysfs_group {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment