Commit f103560c authored by Daniel Vetter's avatar Daniel Vetter

Merge tag 'topic/designware-baytrail-2017-03-02' of...

Merge tag 'topic/designware-baytrail-2017-03-02' of git://anongit.freedesktop.org/git/drm-intel into drm-intel-next-queued

Baytrail PMIC vs. PMU race fixes from Hans de Goede

This time the right version (v4), with the compile fix.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
parents 1f3b1fd3 264ec1a8
......@@ -5,6 +5,8 @@
#ifndef IOSF_MBI_SYMS_H
#define IOSF_MBI_SYMS_H
#include <linux/notifier.h>
#define MBI_MCR_OFFSET 0xD0
#define MBI_MDR_OFFSET 0xD4
#define MBI_MCRX_OFFSET 0xD8
......@@ -47,6 +49,10 @@
#define QRK_MBI_UNIT_MM 0x05
#define QRK_MBI_UNIT_SOC 0x31
/* Action values for the pmic_bus_access_notifier functions */
#define MBI_PMIC_BUS_ACCESS_BEGIN 1
#define MBI_PMIC_BUS_ACCESS_END 2
#if IS_ENABLED(CONFIG_IOSF_MBI)
bool iosf_mbi_available(void);
......@@ -88,6 +94,65 @@ int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr);
*/
int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
/**
* iosf_mbi_punit_acquire() - Acquire access to the P-Unit
*
* One some systems the P-Unit accesses the PMIC to change various voltages
* through the same bus as other kernel drivers use for e.g. battery monitoring.
*
* If a driver sends requests to the P-Unit which require the P-Unit to access
* the PMIC bus while another driver is also accessing the PMIC bus various bad
* things happen.
*
* To avoid these problems this function must be called before accessing the
* P-Unit or the PMIC, be it through iosf_mbi* functions or through other means.
*
* Note on these systems the i2c-bus driver will request a sempahore from the
* P-Unit for exclusive access to the PMIC bus when i2c drivers are accessing
* it, but this does not appear to be sufficient, we still need to avoid making
* certain P-Unit requests during the access window to avoid problems.
*
* This function locks a mutex, as such it may sleep.
*/
void iosf_mbi_punit_acquire(void);
/**
* iosf_mbi_punit_release() - Release access to the P-Unit
*/
void iosf_mbi_punit_release(void);
/**
* iosf_mbi_register_pmic_bus_access_notifier - Register PMIC bus notifier
*
* This function can be used by drivers which may need to acquire P-Unit
* managed resources from interrupt context, where iosf_mbi_punit_acquire()
* can not be used.
*
* This function allows a driver to register a notifier to get notified (in a
* process context) before other drivers start accessing the PMIC bus.
*
* This allows the driver to acquire any resources, which it may need during
* the window the other driver is accessing the PMIC, before hand.
*
* @nb: notifier_block to register
*/
int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb);
/**
* iosf_mbi_register_pmic_bus_access_notifier - Unregister PMIC bus notifier
*
* @nb: notifier_block to unregister
*/
int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb);
/**
* iosf_mbi_call_pmic_bus_access_notifier_chain - Call PMIC bus notifier chain
*
* @val: action to pass into listener's notifier_call function
* @v: data pointer to pass into listener's notifier_call function
*/
int iosf_mbi_call_pmic_bus_access_notifier_chain(unsigned long val, void *v);
#else /* CONFIG_IOSF_MBI is not enabled */
static inline
bool iosf_mbi_available(void)
......@@ -115,6 +180,28 @@ int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
WARN(1, "IOSF_MBI driver not available");
return -EPERM;
}
static inline void iosf_mbi_punit_acquire(void) {}
static inline void iosf_mbi_punit_release(void) {}
static inline
int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb)
{
return 0;
}
static inline
int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb)
{
return 0;
}
static inline
int iosf_mbi_call_pmic_bus_access_notifier_chain(unsigned long val, void *v)
{
return 0;
}
#endif /* CONFIG_IOSF_MBI */
#endif /* IOSF_MBI_SYMS_H */
......@@ -34,6 +34,8 @@
static struct pci_dev *mbi_pdev;
static DEFINE_SPINLOCK(iosf_mbi_lock);
static DEFINE_MUTEX(iosf_mbi_punit_mutex);
static BLOCKING_NOTIFIER_HEAD(iosf_mbi_pmic_bus_access_notifier);
static inline u32 iosf_mbi_form_mcr(u8 op, u8 port, u8 offset)
{
......@@ -190,6 +192,53 @@ bool iosf_mbi_available(void)
}
EXPORT_SYMBOL(iosf_mbi_available);
void iosf_mbi_punit_acquire(void)
{
mutex_lock(&iosf_mbi_punit_mutex);
}
EXPORT_SYMBOL(iosf_mbi_punit_acquire);
void iosf_mbi_punit_release(void)
{
mutex_unlock(&iosf_mbi_punit_mutex);
}
EXPORT_SYMBOL(iosf_mbi_punit_release);
int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb)
{
int ret;
/* Wait for the bus to go inactive before registering */
mutex_lock(&iosf_mbi_punit_mutex);
ret = blocking_notifier_chain_register(
&iosf_mbi_pmic_bus_access_notifier, nb);
mutex_unlock(&iosf_mbi_punit_mutex);
return ret;
}
EXPORT_SYMBOL(iosf_mbi_register_pmic_bus_access_notifier);
int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb)
{
int ret;
/* Wait for the bus to go inactive before unregistering */
mutex_lock(&iosf_mbi_punit_mutex);
ret = blocking_notifier_chain_unregister(
&iosf_mbi_pmic_bus_access_notifier, nb);
mutex_unlock(&iosf_mbi_punit_mutex);
return ret;
}
EXPORT_SYMBOL(iosf_mbi_unregister_pmic_bus_access_notifier);
int iosf_mbi_call_pmic_bus_access_notifier_chain(unsigned long val, void *v)
{
return blocking_notifier_call_chain(
&iosf_mbi_pmic_bus_access_notifier, val, v);
}
EXPORT_SYMBOL(iosf_mbi_call_pmic_bus_access_notifier_chain);
#ifdef CONFIG_IOSF_MBI_DEBUG
static u32 dbg_mdr;
static u32 dbg_mcr;
......
......@@ -20,6 +20,7 @@ config DRM_I915
select ACPI_VIDEO if ACPI
select ACPI_BUTTON if ACPI
select SYNC_FILE
select IOSF_MBI
help
Choose this option if you have a system that has "Intel Graphics
Media Accelerator" or "HD Graphics" integrated graphics,
......
......@@ -1512,7 +1512,7 @@ static int i915_drm_suspend(struct drm_device *dev)
opregion_target_state = suspend_to_idle(dev_priv) ? PCI_D1 : PCI_D3cold;
intel_opregion_notify_adapter(dev_priv, opregion_target_state);
intel_uncore_forcewake_reset(dev_priv, false);
intel_uncore_suspend(dev_priv);
intel_opregion_unregister(dev_priv);
intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED, true);
......@@ -1757,7 +1757,7 @@ static int i915_drm_resume_early(struct drm_device *dev)
DRM_ERROR("Resume prepare failed: %d, continuing anyway\n",
ret);
intel_uncore_early_sanitize(dev_priv, true);
intel_uncore_resume_early(dev_priv);
if (IS_GEN9_LP(dev_priv)) {
if (!dev_priv->suspended_to_idle)
......@@ -2402,7 +2402,7 @@ static int intel_runtime_suspend(struct device *kdev)
return ret;
}
intel_uncore_forcewake_reset(dev_priv, false);
intel_uncore_suspend(dev_priv);
enable_rpm_wakeref_asserts(dev_priv);
WARN_ON_ONCE(atomic_read(&dev_priv->pm.wakeref_count));
......
......@@ -762,6 +762,7 @@ struct intel_uncore {
const struct intel_forcewake_range *fw_domains_table;
unsigned int fw_domains_table_entries;
struct notifier_block pmic_bus_access_nb;
struct intel_uncore_funcs funcs;
unsigned fifo_count;
......@@ -3055,14 +3056,12 @@ int intel_irq_install(struct drm_i915_private *dev_priv);
void intel_irq_uninstall(struct drm_i915_private *dev_priv);
extern void intel_uncore_sanitize(struct drm_i915_private *dev_priv);
extern void intel_uncore_early_sanitize(struct drm_i915_private *dev_priv,
bool restore_forcewake);
extern void intel_uncore_init(struct drm_i915_private *dev_priv);
extern bool intel_uncore_unclaimed_mmio(struct drm_i915_private *dev_priv);
extern bool intel_uncore_arm_unclaimed_mmio_detection(struct drm_i915_private *dev_priv);
extern void intel_uncore_fini(struct drm_i915_private *dev_priv);
extern void intel_uncore_forcewake_reset(struct drm_i915_private *dev_priv,
bool restore);
extern void intel_uncore_suspend(struct drm_i915_private *dev_priv);
extern void intel_uncore_resume_early(struct drm_i915_private *dev_priv);
const char *intel_uncore_forcewake_domain_to_str(const enum forcewake_domain_id id);
void intel_uncore_forcewake_get(struct drm_i915_private *dev_priv,
enum forcewake_domains domains);
......
......@@ -25,6 +25,7 @@
#include "intel_drv.h"
#include "i915_vgpu.h"
#include <asm/iosf_mbi.h>
#include <linux/pm_runtime.h>
#define FORCEWAKE_ACK_TIMEOUT_MS 50
......@@ -259,8 +260,8 @@ intel_uncore_fw_release_timer(struct hrtimer *timer)
return HRTIMER_NORESTART;
}
void intel_uncore_forcewake_reset(struct drm_i915_private *dev_priv,
bool restore)
static void intel_uncore_forcewake_reset(struct drm_i915_private *dev_priv,
bool restore)
{
unsigned long irqflags;
struct intel_uncore_forcewake_domain *domain;
......@@ -436,10 +437,18 @@ static void __intel_uncore_early_sanitize(struct drm_i915_private *dev_priv,
intel_uncore_forcewake_reset(dev_priv, restore_forcewake);
}
void intel_uncore_early_sanitize(struct drm_i915_private *dev_priv,
bool restore_forcewake)
void intel_uncore_suspend(struct drm_i915_private *dev_priv)
{
__intel_uncore_early_sanitize(dev_priv, restore_forcewake);
iosf_mbi_unregister_pmic_bus_access_notifier(
&dev_priv->uncore.pmic_bus_access_nb);
intel_uncore_forcewake_reset(dev_priv, false);
}
void intel_uncore_resume_early(struct drm_i915_private *dev_priv)
{
__intel_uncore_early_sanitize(dev_priv, true);
iosf_mbi_register_pmic_bus_access_notifier(
&dev_priv->uncore.pmic_bus_access_nb);
i915_check_and_clear_faults(dev_priv);
}
......@@ -1280,6 +1289,32 @@ static void intel_uncore_fw_domains_init(struct drm_i915_private *dev_priv)
dev_priv->uncore.fw_domains_table_entries = ARRAY_SIZE((d)); \
}
static int i915_pmic_bus_access_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct drm_i915_private *dev_priv = container_of(nb,
struct drm_i915_private, uncore.pmic_bus_access_nb);
switch (action) {
case MBI_PMIC_BUS_ACCESS_BEGIN:
/*
* forcewake all now to make sure that we don't need to do a
* forcewake later which on systems where this notifier gets
* called requires the punit to access to the shared pmic i2c
* bus, which will be busy after this notification, leading to:
* "render: timed out waiting for forcewake ack request."
* errors.
*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
break;
case MBI_PMIC_BUS_ACCESS_END:
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
break;
}
return NOTIFY_OK;
}
void intel_uncore_init(struct drm_i915_private *dev_priv)
{
i915_check_vgpu(dev_priv);
......@@ -1289,6 +1324,8 @@ void intel_uncore_init(struct drm_i915_private *dev_priv)
__intel_uncore_early_sanitize(dev_priv, false);
dev_priv->uncore.unclaimed_mmio_check = 1;
dev_priv->uncore.pmic_bus_access_nb.notifier_call =
i915_pmic_bus_access_notifier;
switch (INTEL_INFO(dev_priv)->gen) {
default:
......@@ -1339,6 +1376,9 @@ void intel_uncore_init(struct drm_i915_private *dev_priv)
break;
}
iosf_mbi_register_pmic_bus_access_notifier(
&dev_priv->uncore.pmic_bus_access_nb);
i915_check_and_clear_faults(dev_priv);
}
#undef ASSIGN_WRITE_MMIO_VFUNCS
......@@ -1346,6 +1386,9 @@ void intel_uncore_init(struct drm_i915_private *dev_priv)
void intel_uncore_fini(struct drm_i915_private *dev_priv)
{
iosf_mbi_unregister_pmic_bus_access_notifier(
&dev_priv->uncore.pmic_bus_access_nb);
/* Paranoia: make sure we have disabled everything before we exit. */
intel_uncore_sanitize(dev_priv);
intel_uncore_forcewake_reset(dev_priv, false);
......
......@@ -16,6 +16,7 @@
#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/pm_qos.h>
#include <asm/iosf_mbi.h>
......@@ -23,19 +24,29 @@
#define SEMAPHORE_TIMEOUT 100
#define PUNIT_SEMAPHORE 0x7
#define PUNIT_SEMAPHORE_CHT 0x10e
#define PUNIT_SEMAPHORE_BIT BIT(0)
#define PUNIT_SEMAPHORE_ACQUIRE BIT(1)
static unsigned long acquired;
static int get_sem(struct device *dev, u32 *sem)
static u32 get_sem_addr(struct dw_i2c_dev *dev)
{
if (dev->flags & MODEL_CHERRYTRAIL)
return PUNIT_SEMAPHORE_CHT;
else
return PUNIT_SEMAPHORE;
}
static int get_sem(struct dw_i2c_dev *dev, u32 *sem)
{
u32 addr = get_sem_addr(dev);
u32 data;
int ret;
ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data);
ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, addr, &data);
if (ret) {
dev_err(dev, "iosf failed to read punit semaphore\n");
dev_err(dev->dev, "iosf failed to read punit semaphore\n");
return ret;
}
......@@ -44,22 +55,22 @@ static int get_sem(struct device *dev, u32 *sem)
return 0;
}
static void reset_semaphore(struct device *dev)
static void reset_semaphore(struct dw_i2c_dev *dev)
{
u32 data;
if (iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, get_sem_addr(dev),
0, PUNIT_SEMAPHORE_BIT))
dev_err(dev->dev, "iosf failed to reset punit semaphore during write\n");
if (iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data)) {
dev_err(dev, "iosf failed to reset punit semaphore during read\n");
return;
}
pm_qos_update_request(&dev->pm_qos, PM_QOS_DEFAULT_VALUE);
data &= ~PUNIT_SEMAPHORE_BIT;
if (iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, data))
dev_err(dev, "iosf failed to reset punit semaphore during write\n");
iosf_mbi_call_pmic_bus_access_notifier_chain(MBI_PMIC_BUS_ACCESS_END,
NULL);
iosf_mbi_punit_release();
}
static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
{
u32 addr = get_sem_addr(dev);
u32 sem = PUNIT_SEMAPHORE_ACQUIRE;
int ret;
unsigned long start, end;
......@@ -72,18 +83,29 @@ static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
if (!dev->release_lock)
return 0;
iosf_mbi_punit_acquire();
iosf_mbi_call_pmic_bus_access_notifier_chain(MBI_PMIC_BUS_ACCESS_BEGIN,
NULL);
/*
* Disallow the CPU to enter C6 or C7 state, entering these states
* requires the punit to talk to the pmic and if this happens while
* we're holding the semaphore, the SoC hangs.
*/
pm_qos_update_request(&dev->pm_qos, 0);
/* host driver writes to side band semaphore register */
ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, sem);
ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, addr, sem);
if (ret) {
dev_err(dev->dev, "iosf punit semaphore request failed\n");
return ret;
goto out;
}
/* host driver waits for bit 0 to be set in semaphore register */
start = jiffies;
end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT);
do {
ret = get_sem(dev->dev, &sem);
ret = get_sem(dev, &sem);
if (!ret && sem) {
acquired = jiffies;
dev_dbg(dev->dev, "punit semaphore acquired after %ums\n",
......@@ -95,9 +117,10 @@ static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
} while (time_before(jiffies, end));
dev_err(dev->dev, "punit semaphore timed out, resetting\n");
reset_semaphore(dev->dev);
out:
reset_semaphore(dev);
ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &sem);
ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, addr, &sem);
if (ret)
dev_err(dev->dev, "iosf failed to read punit semaphore\n");
else
......@@ -116,12 +139,12 @@ static void baytrail_i2c_release(struct dw_i2c_dev *dev)
if (!dev->acquire_lock)
return;
reset_semaphore(dev->dev);
reset_semaphore(dev);
dev_dbg(dev->dev, "punit semaphore held for %ums\n",
jiffies_to_msecs(jiffies - acquired));
}
int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev)
int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
{
acpi_status status;
unsigned long long shared_host = 0;
......@@ -138,15 +161,25 @@ int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev)
if (ACPI_FAILURE(status))
return 0;
if (shared_host) {
dev_info(dev->dev, "I2C bus managed by PUNIT\n");
dev->acquire_lock = baytrail_i2c_acquire;
dev->release_lock = baytrail_i2c_release;
dev->pm_runtime_disabled = true;
}
if (!shared_host)
return 0;
if (!iosf_mbi_available())
return -EPROBE_DEFER;
dev_info(dev->dev, "I2C bus managed by PUNIT\n");
dev->acquire_lock = baytrail_i2c_acquire;
dev->release_lock = baytrail_i2c_release;
dev->pm_runtime_disabled = true;
pm_qos_add_request(&dev->pm_qos, PM_QOS_CPU_DMA_LATENCY,
PM_QOS_DEFAULT_VALUE);
return 0;
}
void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
{
if (dev->acquire_lock)
pm_qos_remove_request(&dev->pm_qos);
}
......@@ -177,13 +177,13 @@ static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
{
u32 value;
if (dev->accessor_flags & ACCESS_16BIT)
if (dev->flags & ACCESS_16BIT)
value = readw_relaxed(dev->base + offset) |
(readw_relaxed(dev->base + offset + 2) << 16);
else
value = readl_relaxed(dev->base + offset);
if (dev->accessor_flags & ACCESS_SWAP)
if (dev->flags & ACCESS_SWAP)
return swab32(value);
else
return value;
......@@ -191,10 +191,10 @@ static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
{
if (dev->accessor_flags & ACCESS_SWAP)
if (dev->flags & ACCESS_SWAP)
b = swab32(b);
if (dev->accessor_flags & ACCESS_16BIT) {
if (dev->flags & ACCESS_16BIT) {
writew_relaxed((u16)b, dev->base + offset);
writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
} else {
......@@ -339,10 +339,10 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
reg = dw_readl(dev, DW_IC_COMP_TYPE);
if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
/* Configure register endianess access */
dev->accessor_flags |= ACCESS_SWAP;
dev->flags |= ACCESS_SWAP;
} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
/* Configure register access mode 16bit */
dev->accessor_flags |= ACCESS_16BIT;
dev->flags |= ACCESS_16BIT;
} else if (reg != DW_IC_COMP_TYPE_VALUE) {
dev_err(dev->dev, "Unknown Synopsys component type: "
"0x%08x\n", reg);
......@@ -924,7 +924,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
tx_aborted:
if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
complete(&dev->cmd_complete);
else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
/* workaround to trigger pending interrupt */
stat = dw_readl(dev, DW_IC_INTR_MASK);
i2c_dw_disable_int(dev);
......
......@@ -23,6 +23,7 @@
*/
#include <linux/i2c.h>
#include <linux/pm_qos.h>
#define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \
I2C_FUNC_SMBUS_BYTE | \
......@@ -75,6 +76,7 @@
* @fp_lcnt: fast plus LCNT value
* @hs_hcnt: high speed HCNT value
* @hs_lcnt: high speed LCNT value
* @pm_qos: pm_qos_request used while holding a hardware lock on the bus
* @acquire_lock: function to acquire a hardware lock on the bus
* @release_lock: function to release a hardware lock on the bus
* @pm_runtime_disabled: true if pm runtime is disabled
......@@ -103,7 +105,7 @@ struct dw_i2c_dev {
unsigned int status;
u32 abort_source;
int irq;
u32 accessor_flags;
u32 flags;
struct i2c_adapter adapter;
u32 functionality;
u32 master_cfg;
......@@ -122,6 +124,7 @@ struct dw_i2c_dev {
u16 fp_lcnt;
u16 hs_hcnt;
u16 hs_lcnt;
struct pm_qos_request pm_qos;
int (*acquire_lock)(struct dw_i2c_dev *dev);
void (*release_lock)(struct dw_i2c_dev *dev);
bool pm_runtime_disabled;
......@@ -131,6 +134,8 @@ struct dw_i2c_dev {
#define ACCESS_16BIT 0x00000002
#define ACCESS_INTR_MASK 0x00000004
#define MODEL_CHERRYTRAIL 0x00000100
extern int i2c_dw_init(struct dw_i2c_dev *dev);
extern void i2c_dw_disable(struct dw_i2c_dev *dev);
extern void i2c_dw_disable_int(struct dw_i2c_dev *dev);
......@@ -138,7 +143,9 @@ extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
extern int i2c_dw_probe(struct dw_i2c_dev *dev);
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
extern int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev);
extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
extern void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev);
#else
static inline int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev) { return 0; }
static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; }
static inline void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev) {}
#endif
......@@ -45,6 +45,7 @@ enum dw_pci_ctl_id_t {
medfield,
merrifield,
baytrail,
cherrytrail,
haswell,
};
......@@ -63,6 +64,7 @@ struct dw_pci_controller {
u32 rx_fifo_depth;
u32 clk_khz;
u32 functionality;
u32 flags;
struct dw_scl_sda_cfg *scl_sda_cfg;
int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
};
......@@ -170,6 +172,15 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &hsw_config,
},
[cherrytrail] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.flags = MODEL_CHERRYTRAIL,
.scl_sda_cfg = &byt_config,
},
};
#ifdef CONFIG_PM
......@@ -237,6 +248,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
dev->base = pcim_iomap_table(pdev)[0];
dev->dev = &pdev->dev;
dev->irq = pdev->irq;
dev->flags |= controller->flags;
if (controller->setup) {
r = controller->setup(pdev, controller);
......@@ -317,13 +329,13 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x9c61), haswell },
{ PCI_VDEVICE(INTEL, 0x9c62), haswell },
/* Braswell / Cherrytrail */
{ PCI_VDEVICE(INTEL, 0x22C1), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C2), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C3), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C4), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C5), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C6), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C7), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C1), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C2), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C3), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C4), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C5), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C6), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C7), cherrytrail },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
......
......@@ -112,7 +112,7 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
if (id && id->driver_data)
dev->accessor_flags |= (u32)id->driver_data;
dev->flags |= (u32)id->driver_data;
return 0;
}
......@@ -123,7 +123,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "INT3432", 0 },
{ "INT3433", 0 },
{ "80860F41", 0 },
{ "808622C1", 0 },
{ "808622C1", MODEL_CHERRYTRAIL },
{ "AMD0010", ACCESS_INTR_MASK },
{ "AMDI0010", ACCESS_INTR_MASK },
{ "AMDI0510", 0 },
......@@ -238,7 +238,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
return -EINVAL;
}
r = i2c_dw_eval_lock_support(dev);
r = i2c_dw_probe_lock_support(dev);
if (r)
return r;
......@@ -307,6 +307,8 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
if (!dev->pm_runtime_disabled)
pm_runtime_disable(&pdev->dev);
i2c_dw_remove_lock_support(dev);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment