Commit f132da25 authored by Steve Twiss's avatar Steve Twiss Committed by Mark Brown

regulator: ltc3589: Fix notifier mutex lock warning

The mutex for the regulator_dev must be controlled by the caller of
the regulator_notifier_call_chain(), as described in the comment
for that function.

Failure to mutex lock and unlock surrounding the notifier call results
in a kernel WARN_ON_ONCE() which will dump a backtrace for the
regulator_notifier_call_chain() when that function call is first made.
The mutex can be controlled using the regulator_lock/unlock() API.

Fixes: 3eb2c7ec ("regulator: Add LTC3589 support")
Suggested-by: default avatarAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: default avatarSteve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 89b2758c
...@@ -419,16 +419,22 @@ static irqreturn_t ltc3589_isr(int irq, void *dev_id) ...@@ -419,16 +419,22 @@ static irqreturn_t ltc3589_isr(int irq, void *dev_id)
if (irqstat & LTC3589_IRQSTAT_THERMAL_WARN) { if (irqstat & LTC3589_IRQSTAT_THERMAL_WARN) {
event = REGULATOR_EVENT_OVER_TEMP; event = REGULATOR_EVENT_OVER_TEMP;
for (i = 0; i < LTC3589_NUM_REGULATORS; i++) for (i = 0; i < LTC3589_NUM_REGULATORS; i++) {
regulator_lock(ltc3589->regulators[i]);
regulator_notifier_call_chain(ltc3589->regulators[i], regulator_notifier_call_chain(ltc3589->regulators[i],
event, NULL); event, NULL);
regulator_unlock(ltc3589->regulators[i]);
}
} }
if (irqstat & LTC3589_IRQSTAT_UNDERVOLT_WARN) { if (irqstat & LTC3589_IRQSTAT_UNDERVOLT_WARN) {
event = REGULATOR_EVENT_UNDER_VOLTAGE; event = REGULATOR_EVENT_UNDER_VOLTAGE;
for (i = 0; i < LTC3589_NUM_REGULATORS; i++) for (i = 0; i < LTC3589_NUM_REGULATORS; i++) {
regulator_lock(ltc3589->regulators[i]);
regulator_notifier_call_chain(ltc3589->regulators[i], regulator_notifier_call_chain(ltc3589->regulators[i],
event, NULL); event, NULL);
regulator_unlock(ltc3589->regulators[i]);
}
} }
/* Clear warning condition */ /* Clear warning condition */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment