Commit f1425381 authored by Chiranjeevi Rapolu's avatar Chiranjeevi Rapolu Committed by Mauro Carvalho Chehab

media: ov5670: Fix incorrect frame timing reported to user

Previously, pixel-rate/(pixels-per-line * lines-per-frame) was
yielding incorrect frame timing for the user.

OV sensor is using internal timing and this requires
conversion (internal timing -> PPL) for correct HBLANK calculation.

Now, change pixels-per-line domain from internal sensor clock to
pixels domain. Set HBLANK read-only because fixed PPL is used for all
resolutions. And, use more accurate link-frequency 422.4MHz instead of
rounding down to 420MHz.
Signed-off-by: default avatarChiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Reviewed-by: default avatarTomasz Figa <tfiga@chromium.org>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 52471f67
......@@ -37,7 +37,13 @@
/* horizontal-timings from sensor */
#define OV5670_REG_HTS 0x380c
#define OV5670_DEF_PPL 3360 /* Default pixels per line */
/*
* Pixels-per-line(PPL) = Time-per-line * pixel-rate
* In OV5670, Time-per-line = HTS/SCLK.
* HTS is fixed for all resolutions, not recommended to change.
*/
#define OV5670_FIXED_PPL 2724 /* Pixels per line */
/* Exposure controls from sensor */
#define OV5670_REG_EXPOSURE 0x3500
......@@ -1705,12 +1711,12 @@ static const char * const ov5670_test_pattern_menu[] = {
};
/* Supported link frequencies */
#define OV5670_LINK_FREQ_420MHZ 420000000
#define OV5670_LINK_FREQ_420MHZ_INDEX 0
#define OV5670_LINK_FREQ_422MHZ 422400000
#define OV5670_LINK_FREQ_422MHZ_INDEX 0
static const struct ov5670_link_freq_config link_freq_configs[] = {
{
/* pixel_rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
.pixel_rate = (OV5670_LINK_FREQ_420MHZ * 2 * 2) / 10,
.pixel_rate = (OV5670_LINK_FREQ_422MHZ * 2 * 2) / 10,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mipi_data_rate_840mbps),
.regs = mipi_data_rate_840mbps,
......@@ -1719,7 +1725,7 @@ static const struct ov5670_link_freq_config link_freq_configs[] = {
};
static const s64 link_freq_menu_items[] = {
OV5670_LINK_FREQ_420MHZ
OV5670_LINK_FREQ_422MHZ
};
/*
......@@ -1736,7 +1742,7 @@ static const struct ov5670_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_2592x1944_regs),
.regs = mode_2592x1944_regs,
},
.link_freq_index = OV5670_LINK_FREQ_420MHZ_INDEX,
.link_freq_index = OV5670_LINK_FREQ_422MHZ_INDEX,
},
{
.width = 1296,
......@@ -1746,7 +1752,7 @@ static const struct ov5670_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_1296x972_regs),
.regs = mode_1296x972_regs,
},
.link_freq_index = OV5670_LINK_FREQ_420MHZ_INDEX,
.link_freq_index = OV5670_LINK_FREQ_422MHZ_INDEX,
},
{
.width = 648,
......@@ -1756,7 +1762,7 @@ static const struct ov5670_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_648x486_regs),
.regs = mode_648x486_regs,
},
.link_freq_index = OV5670_LINK_FREQ_420MHZ_INDEX,
.link_freq_index = OV5670_LINK_FREQ_422MHZ_INDEX,
},
{
.width = 2560,
......@@ -1766,7 +1772,7 @@ static const struct ov5670_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_2560x1440_regs),
.regs = mode_2560x1440_regs,
},
.link_freq_index = OV5670_LINK_FREQ_420MHZ_INDEX,
.link_freq_index = OV5670_LINK_FREQ_422MHZ_INDEX,
},
{
.width = 1280,
......@@ -1776,7 +1782,7 @@ static const struct ov5670_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_1280x720_regs),
.regs = mode_1280x720_regs,
},
.link_freq_index = OV5670_LINK_FREQ_420MHZ_INDEX,
.link_freq_index = OV5670_LINK_FREQ_422MHZ_INDEX,
},
{
.width = 640,
......@@ -1786,7 +1792,7 @@ static const struct ov5670_mode supported_modes[] = {
.num_of_regs = ARRAY_SIZE(mode_640x360_regs),
.regs = mode_640x360_regs,
},
.link_freq_index = OV5670_LINK_FREQ_420MHZ_INDEX,
.link_freq_index = OV5670_LINK_FREQ_422MHZ_INDEX,
}
};
......@@ -2016,13 +2022,6 @@ static int ov5670_set_ctrl(struct v4l2_ctrl *ctrl)
OV5670_REG_VALUE_16BIT,
ov5670->cur_mode->height + ctrl->val);
break;
case V4L2_CID_HBLANK:
/* Update HTS that meets expected horizontal blanking */
ret = ov5670_write_reg(ov5670, OV5670_REG_HTS,
OV5670_REG_VALUE_16BIT,
(ov5670->cur_mode->width +
ctrl->val) / 2);
break;
case V4L2_CID_TEST_PATTERN:
ret = ov5670_enable_test_pattern(ov5670, ctrl->val);
break;
......@@ -2078,9 +2077,11 @@ static int ov5670_init_controls(struct ov5670 *ov5670)
ov5670->hblank = v4l2_ctrl_new_std(
ctrl_hdlr, &ov5670_ctrl_ops, V4L2_CID_HBLANK,
OV5670_DEF_PPL - ov5670->cur_mode->width,
OV5670_DEF_PPL - ov5670->cur_mode->width, 1,
OV5670_DEF_PPL - ov5670->cur_mode->width);
OV5670_FIXED_PPL - ov5670->cur_mode->width,
OV5670_FIXED_PPL - ov5670->cur_mode->width, 1,
OV5670_FIXED_PPL - ov5670->cur_mode->width);
if (ov5670->hblank)
ov5670->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
/* Get min, max, step, default from sensor */
v4l2_ctrl_new_std(ctrl_hdlr, &ov5670_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
......@@ -2247,7 +2248,7 @@ static int ov5670_set_pad_format(struct v4l2_subdev *sd,
OV5670_VTS_MAX - ov5670->cur_mode->height, 1,
vblank_def);
__v4l2_ctrl_s_ctrl(ov5670->vblank, vblank_def);
h_blank = OV5670_DEF_PPL - ov5670->cur_mode->width;
h_blank = OV5670_FIXED_PPL - ov5670->cur_mode->width;
__v4l2_ctrl_modify_range(ov5670->hblank, h_blank, h_blank, 1,
h_blank);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment