spi: Convert sprd ADI bindings to yaml

Convert spi-sprd-adi.txt to yaml.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210826091549.2138125-4-zhang.lyra@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/spi/spi-sprd-adi.txt

-Spreadtrum ADI controller
-
-ADI is the abbreviation of Anolog-Digital interface, which is used to access
-analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
-framework for its hardware implementation is alike to SPI bus and its timing
-is compatile to SPI timing.
-
-ADI controller has 50 channels including 2 software read/write channels and
-48 hardware channels to access analog chip. For 2 software read/write channels,
-users should set ADI registers to access analog chip. For hardware channels,
-we can configure them to allow other hardware components to use it independently,
-which means we can just link one analog chip address to one hardware channel,
-then users can access the mapped analog chip address by this hardware channel
-triggered by hardware components instead of ADI software channels.
-
-Thus we introduce one property named "sprd,hw-channels" to configure hardware
-channels, the first value specifies the hardware channel id which is used to
-transfer data triggered by hardware automatically, and the second value specifies
-the analog chip address where user want to access by hardware components.
-
-Since we have multi-subsystems will use unique ADI to access analog chip, when
-one system is reading/writing data by ADI software channels, that should be under
-one hardware spinlock protection to prevent other systems from reading/writing
-data by ADI software channels at the same time, or two parallel routine of setting
-ADI registers will make ADI controller registers chaos to lead incorrect results.
-Then we need one hardware spinlock to synchronize between the multiple subsystems.
-
-The new version ADI controller supplies multiple master channels for different
-subsystem accessing, that means no need to add hardware spinlock to synchronize,
-thus change the hardware spinlock support to be optional to keep backward
-compatibility.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-adi".
-- reg: Offset and length of ADI-SPI controller register space.
-- #address-cells: Number of cells required to define a chip select address
-	on the ADI-SPI bus. Should be set to 1.
-- #size-cells: Size of cells required to define a chip select address size
-	on the ADI-SPI bus. Should be set to 0.
-
-Optional properties:
-- hwlocks: Reference to a phandle of a hwlock provider node.
-- hwlock-names: Reference to hwlock name strings defined in the same order
-	as the hwlocks, should be "adi".
-- sprd,hw-channels: This is an array of channel values up to 49 channels.
-	The first value specifies the hardware channel id which is used to
-	transfer data triggered by hardware automatically, and the second
-	value specifies the analog chip address where user want to access
-	by hardware components.
-
-SPI slave nodes must be children of the SPI controller node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
-
-Example:
-	adi_bus: spi@40030000 {
-		compatible = "sprd,sc9860-adi";
-		reg = <0 0x40030000 0 0x10000>;
-		hwlocks = <&hwlock1 0>;
-		hwlock-names = "adi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		sprd,hw-channels = <30 0x8c20>;
-	};

Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Spreadtrum ADI controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  ADI is the abbreviation of Anolog-Digital interface, which is used to access
+  analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
+  framework for its hardware implementation is alike to SPI bus and its timing
+  is compatile to SPI timing.
+
+  ADI controller has 50 channels including 2 software read/write channels and
+  48 hardware channels to access analog chip. For 2 software read/write channels,
+  users should set ADI registers to access analog chip. For hardware channels,
+  we can configure them to allow other hardware components to use it independently,
+  which means we can just link one analog chip address to one hardware channel,
+  then users can access the mapped analog chip address by this hardware channel
+  triggered by hardware components instead of ADI software channels.
+
+  Thus we introduce one property named "sprd,hw-channels" to configure hardware
+  channels, the first value specifies the hardware channel id which is used to
+  transfer data triggered by hardware automatically, and the second value specifies
+  the analog chip address where user want to access by hardware components.
+
+  Since we have multi-subsystems will use unique ADI to access analog chip, when
+  one system is reading/writing data by ADI software channels, that should be under
+  one hardware spinlock protection to prevent other systems from reading/writing
+  data by ADI software channels at the same time, or two parallel routine of setting
+  ADI registers will make ADI controller registers chaos to lead incorrect results.
+  Then we need one hardware spinlock to synchronize between the multiple subsystems.
+
+  The new version ADI controller supplies multiple master channels for different
+  subsystem accessing, that means no need to add hardware spinlock to synchronize,
+  thus change the hardware spinlock support to be optional to keep backward
+  compatibility.
+
+allOf:
+  - $ref: /spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc9860-adi
+
+  reg:
+    maxItems: 1
+
+  hwlocks:
+    maxItems: 1
+
+  hwlock-names:
+    const: adi
+
+  sprd,hw-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: A list of hardware channels
+    minItems: 1
+    maxItems: 48
+    items:
+      items:
+        - description: The hardware channel id which is used to transfer data
+            triggered by hardware automatically, channel id 0-1 are for software
+            use, 2-49 are hardware channels.
+          minimum: 2
+          maximum: 49
+        - description: The analog chip address where user want to access by
+            hardware components.
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aon {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        adi_bus: spi@40030000 {
+            compatible = "sprd,sc9860-adi";
+            reg = <0 0x40030000 0 0x10000>;
+            hwlocks = <&hwlock1 0>;
+            hwlock-names = "adi";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            sprd,hw-channels = <30 0x8c20>;
+        };
+    };
+...