Skip to content

L
linux
Commit f1ad8c93 authored by Vladimir Kondratiev's avatar Vladimir Kondratiev Committed by Kalle Valo
Browse files
Options

wil6210: support boot loader struct v0 & v1 

There are 2 versions of boot loader struct: v0 and v1.
In the v1, boot loader build version added; as well as
RF status.

Support both versions.

Boot loader structure v1 has RF status; ignore RF error if firmware
not going to be loaded; driver can still be used to interact with the HW
Signed-off-by: default avatarVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent ae7d3821
Hide whitespace changes
Inline Side-by-side
Showing with 124 additions and 27 deletions
drivers/net/wireless/ath/wil6210/boot_loader.h 0 → 100644
View file @ f1ad8c93
/* Copyright (c) 2015 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/* This file contains the definitions for the boot loader
* for the Qualcomm "Sparrow" 60 Gigabit wireless solution.
*/
#ifndef BOOT_LOADER_EXPORT_H_
#define BOOT_LOADER_EXPORT_H_
struct bl_dedicated_registers_v1 {
__le32 boot_loader_ready; /* 0x880A3C driver will poll
* this Dword until BL will
* set it to 1 (initial value
* should be 0)
*/
__le32 boot_loader_struct_version; /* 0x880A40 BL struct ver. */
__le16 rf_type; /* 0x880A44 connected RF ID */
__le16 rf_status; /* 0x880A46 RF status,
* 0 is OK else error
*/
__le32 baseband_type; /* 0x880A48 board type ID */
u8 mac_address[6]; /* 0x880A4c BL mac address */
u8 bl_version_major; /* 0x880A52 BL ver. major */
u8 bl_version_minor; /* 0x880A53 BL ver. minor */
__le16 bl_version_subminor; /* 0x880A54 BL ver. subminor */
__le16 bl_version_build; /* 0x880A56 BL ver. build */
} __packed;
/* the following struct is the version 0 struct */
struct bl_dedicated_registers_v0 {
__le32 boot_loader_ready; /* 0x880A3C driver will poll
* this Dword until BL will
* set it to 1 (initial value
* should be 0)
*/
#define BL_READY (1) /* ready indication */
__le32 boot_loader_struct_version; /* 0x880A40 BL struct ver. */
__le32 rf_type; /* 0x880A44 connected RF ID */
__le32 baseband_type; /* 0x880A48 board type ID */
u8 mac_address[6]; /* 0x880A4c BL mac address */
} __packed;
#endif /* BOOT_LOADER_EXPORT_H_ */
drivers/net/wireless/ath/wil6210/main.c
View file @ f1ad8c93
......@@ -21,6 +21,7 @@
#include "wil6210.h"
#include "txrx.h"
#include "wmi.h"
#include "boot_loader.h"
#define WAIT_FOR_DISCONNECT_TIMEOUT_MS 2000
#define WAIT_FOR_DISCONNECT_INTERVAL_MS 10
......@@ -565,7 +566,8 @@ static int wil_target_reset(struct wil6210_priv *wil)
wil_halt_cpu(wil);
/* clear all boot loader "ready" bits */
W(RGF_USER_BL + offsetof(struct RGF_BL, ready), 0);
W(RGF_USER_BL +
offsetof(struct bl_dedicated_registers_v0, boot_loader_ready), 0);
/* Clear Fw Download notification */
C(RGF_USER_USAGE_6, BIT(0));
......@@ -607,7 +609,8 @@ static int wil_target_reset(struct wil6210_priv *wil)
/* wait until device ready. typical time is 20..80 msec */
do {
msleep(RST_DELAY);
x = R(RGF_USER_BL + offsetof(struct RGF_BL, ready));
x = R(RGF_USER_BL + offsetof(struct bl_dedicated_registers_v0,
boot_loader_ready));
if (x1 != x) {
wil_dbg_misc(wil, "BL.ready 0x%08x => 0x%08x\n", x1, x);
x1 = x;
......@@ -617,7 +620,7 @@ static int wil_target_reset(struct wil6210_priv *wil)
x);
return -ETIME;
}
} while (x != BIT_BL_READY);
} while (x != BL_READY);
C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
......@@ -641,25 +644,71 @@ void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
static int wil_get_bl_info(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
struct RGF_BL bl;
wil_memcpy_fromio_32(&bl, wil->csr + HOSTADDR(RGF_USER_BL), sizeof(bl));
le32_to_cpus(&bl.ready);
le32_to_cpus(&bl.version);
le32_to_cpus(&bl.rf_type);
le32_to_cpus(&bl.baseband_type);
union {
struct bl_dedicated_registers_v0 bl0;
struct bl_dedicated_registers_v1 bl1;
} bl;
u32 bl_ver;
u8 *mac;
u16 rf_status;
bl_ver = R(RGF_USER_BL + offsetof(struct bl_dedicated_registers_v0,
boot_loader_struct_version));
switch (bl_ver) {
case 0:
wil_memcpy_fromio_32(&bl, wil->csr + HOSTADDR(RGF_USER_BL),
sizeof(bl.bl0));
le32_to_cpus(&bl.bl0.boot_loader_ready);
le32_to_cpus(&bl.bl0.boot_loader_struct_version);
le32_to_cpus(&bl.bl0.rf_type);
le32_to_cpus(&bl.bl0.baseband_type);
mac = bl.bl0.mac_address;
rf_status = 0; /* actually, unknown */
wil_info(wil,
"Boot Loader struct v%d: MAC = %pM RF = 0x%08x bband = 0x%08x\n",
bl_ver, mac,
bl.bl0.rf_type, bl.bl0.baseband_type);
wil_info(wil, "Boot Loader build unknown for struct v0\n");
break;
case 1:
wil_memcpy_fromio_32(&bl, wil->csr + HOSTADDR(RGF_USER_BL),
sizeof(bl.bl1));
le32_to_cpus(&bl.bl1.boot_loader_ready);
le32_to_cpus(&bl.bl1.boot_loader_struct_version);
le16_to_cpus(&bl.bl1.rf_type);
rf_status = le16_to_cpu(bl.bl1.rf_status);
le32_to_cpus(&bl.bl1.baseband_type);
le16_to_cpus(&bl.bl1.bl_version_subminor);
le16_to_cpus(&bl.bl1.bl_version_build);
mac = bl.bl1.mac_address;
wil_info(wil,
"Boot Loader struct v%d: MAC = %pM RF = 0x%04x (status 0x%04x) bband = 0x%08x\n",
bl_ver, mac,
bl.bl1.rf_type, rf_status,
bl.bl1.baseband_type);
wil_info(wil, "Boot Loader build %d.%d.%d.%d\n",
bl.bl1.bl_version_major, bl.bl1.bl_version_minor,
bl.bl1.bl_version_subminor, bl.bl1.bl_version_build);
break;
default:
wil_err(wil, "BL: unsupported struct version 0x%08x\n", bl_ver);
return -EINVAL;
}
if (!is_valid_ether_addr(bl.mac_address)) {
wil_err(wil, "BL: Invalid MAC %pM\n", bl.mac_address);
if (!is_valid_ether_addr(mac)) {
wil_err(wil, "BL: Invalid MAC %pM\n", mac);
return -EINVAL;
}
ether_addr_copy(ndev->perm_addr, bl.mac_address);
ether_addr_copy(ndev->perm_addr, mac);
if (!is_valid_ether_addr(ndev->dev_addr))
ether_addr_copy(ndev->dev_addr, bl.mac_address);
wil_info(wil,
"Boot Loader: ver = %d MAC = %pM RF = 0x%08x bband = 0x%08x\n",
bl.version, bl.mac_address, bl.rf_type, bl.baseband_type);
ether_addr_copy(ndev->dev_addr, mac);
if (rf_status) {/* bad RF cable? */
wil_err(wil, "RF communication error 0x%04x",
rf_status);
return -EAGAIN;
}
return 0;
}
......@@ -735,6 +784,8 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
return rc;
rc = wil_get_bl_info(wil);
if (rc == -EAGAIN && !load_fw) /* ignore RF error if not going up */
rc = 0;
if (rc)
return rc;
......
drivers/net/wireless/ath/wil6210/wil6210.h
View file @ f1ad8c93
......@@ -127,16 +127,6 @@ struct RGF_ICR {
u32 IMC; /* Mask Clear, write 1 to clear */
} __packed;
struct RGF_BL {
u32 ready; /* 0x880A3C bit [0] */
#define BIT_BL_READY BIT(0)
u32 version; /* 0x880A40 version of the BL struct */
u32 rf_type; /* 0x880A44 ID of the connected RF */
u32 baseband_type; /* 0x880A48 ID of the baseband */
u8 mac_address[ETH_ALEN]; /* 0x880A4C permanent MAC */
u8 pad[2];
} __packed;
/* registers - FW addresses */
#define RGF_USER_USAGE_1 (0x880004)
#define RGF_USER_USAGE_6 (0x880018)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7