scsi: storvsc: Workaround for virtual DVD SCSI version

Hyper-V host emulation of SCSI for virtual DVD device reports SCSI
version 0 (UNKNOWN) but is still capable of supporting REPORTLUN.

Without this patch, a GEN2 Linux guest on Hyper-V will not boot 4.11
successfully with virtual DVD ROM device. What happens is that the SCSI
scan process falls back to doing sequential probing by INQUIRY.  But the
storvsc driver has a previous workaround that masks/blocks all errors
reports from INQUIRY (or MODE_SENSE) commands.  This workaround causes
the scan to then populate a full set of bogus LUN's on the target and
then sends kernel spinning off into a death spiral doing block reads on
the non-existent LUNs.

By setting the correct blacklist flags, the target with the DVD device
is scanned with REPORTLUN and that works correctly.

Patch needs to go in current 4.11, it is safe but not necessary in older
kernels.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/storvsc_drv.c

@@ -400,8 +400,6 @@ MODULE_PARM_DESC(storvsc_vcpus_per_sub_channel, "Ratio of VCPUs to subchannels")
  */
 static int storvsc_timeout = 180;
 
-static int msft_blist_flags = BLIST_TRY_VPD_PAGES;
-
 #if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
 static struct scsi_transport_template *fc_transport_template;
 #endif
@@ -1383,6 +1381,22 @@ static int storvsc_do_io(struct hv_device *device,
 	return ret;
 }
 
+static int storvsc_device_alloc(struct scsi_device *sdevice)
+{
+	/*
+	 * Set blist flag to permit the reading of the VPD pages even when
+	 * the target may claim SPC-2 compliance. MSFT targets currently
+	 * claim SPC-2 compliance while they implement post SPC-2 features.
+	 * With this flag we can correctly handle WRITE_SAME_16 issues.
+	 *
+	 * Hypervisor reports SCSI_UNKNOWN type for DVD ROM device but
+	 * still supports REPORT LUN.
+	 */
+	sdevice->sdev_bflags = BLIST_REPORTLUN2 | BLIST_TRY_VPD_PAGES;
+
+	return 0;
+}
+
 static int storvsc_device_configure(struct scsi_device *sdevice)
 {
 
@@ -1395,14 +1409,6 @@ static int storvsc_device_configure(struct scsi_device *sdevice)
 
 	sdevice->no_write_same = 1;
 
-	/*
-	 * Add blist flags to permit the reading of the VPD pages even when
-	 * the target may claim SPC-2 compliance. MSFT targets currently
-	 * claim SPC-2 compliance while they implement post SPC-2 features.
-	 * With this patch we can correctly handle WRITE_SAME_16 issues.
-	 */
-	sdevice->sdev_bflags |= msft_blist_flags;
-
 	/*
 	 * If the host is WIN8 or WIN8 R2, claim conformance to SPC-3
 	 * if the device is a MSFT virtual device.  If the host is
@@ -1661,6 +1667,7 @@ static struct scsi_host_template scsi_driver = {
 	.eh_host_reset_handler =	storvsc_host_reset_handler,
 	.proc_name =		"storvsc_host",
 	.eh_timed_out =		storvsc_eh_timed_out,
+	.slave_alloc =		storvsc_device_alloc,
 	.slave_configure =	storvsc_device_configure,
 	.cmd_per_lun =		255,
 	.this_id =		-1,