Merge tag 'imx-fixes-5.1-2' of...

Merge tag 'imx-fixes-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

i.MX fixes for 5.1, round 2:
 - A couple of imx6q-logicpd device tree fixes to reduce inrush current,
   so that the board can always work properly.
 - Fix buggy device trees that use AR803X to set up phy-mode as
   rgmii-id.  These device trees are broken since day one, and the bug
   gets exposed by the AR803X phy driver changes.  i.MX community agreed
   to fix those broken device trees rather than supporting messy back
   compatibility in driver code.

* tag 'imx-fixes-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1
  ARM: dts: imx6q-logicpd: Reduce inrush current on start
  ARM: dts: imx: Fix the AR803X phy-mode
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi

@@ -88,6 +88,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
 		enable-active-high;
 	};
 
@@ -99,6 +100,7 @@ reg_3v3: regulator-3v3 {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
 		enable-active-high;
 		regulator-always-on;
 	};
@@ -216,7 +218,7 @@ &ecspi1 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_enet>;

arch/arm/boot/dts/imx6dl-riotboard.dts

@@ -92,7 +92,7 @@ &clks {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/imx6q-ba16.dtsi

@@ -171,7 +171,7 @@ partition@3f0000 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6q-marsboard.dts

@@ -110,7 +110,7 @@ m25p80@0 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6q-tbs2910.dts

@@ -98,7 +98,7 @@ &audmux {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-apf6.dtsi

@@ -51,7 +51,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -292,7 +292,7 @@ &esai {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -202,7 +202,7 @@ flash: m25p80@0 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-sr-som.dtsi

@@ -53,7 +53,7 @@ vcc_3v3: regulator-vcc-3v3 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <2>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

@@ -224,7 +224,7 @@ MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/imx6sx-sabreauto.dts

@@ -75,7 +75,7 @@ &anaclk2 {
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	fsl,magic-packet;
 	status = "okay";

arch/arm/boot/dts/imx6sx-sdb.dtsi

@@ -191,7 +191,7 @@ &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-supply = <&reg_enet_3v3>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 	status = "okay";

arch/arm/boot/dts/imx7d-pico.dtsi

@@ -92,7 +92,7 @@ &fec1 {
 			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
 	phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;