ARM: S5P64X0: Move DMA support for S5P64X0

This patch moves DMA support files in the mach-s5p64x0
for S5P6440 and S5P6450 SoCs.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Jassi Brar <jassi.brar@samsung.com>

arch/arm/mach-s5p6440/dma.c → arch/arm/mach-s5p64x0/dma.c

-/*
+/* linux/arch/arm/mach-s5p64x0/dma.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -15,26 +19,25 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+*/
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
 #include <mach/map.h>
 #include <mach/irqs.h>
+#include <mach/regs-clock.h>
 
+#include <plat/devs.h>
 #include <plat/s3c-pl330-pdata.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5p6440_pdma_resource[] = {
+static struct resource s5p64x0_pdma_resource[] = {
 	[0] = {
-		.start  = S5P6440_PA_PDMA,
-		.end    = S5P6440_PA_PDMA + SZ_4K,
-		.flags = IORESOURCE_MEM,
+		.start	= S5P64X0_PA_PDMA,
+		.end	= S5P64X0_PA_PDMA + SZ_4K,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
 		.start	= IRQ_DMA0,
@@ -80,26 +83,67 @@ static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
 	},
 };
 
-static struct platform_device s5p6440_device_pdma = {
+static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_UART4_RX,
+		[9] = DMACH_UART4_TX,
+		[10] = DMACH_PCM0_TX,
+		[11] = DMACH_PCM0_RX,
+		[12] = DMACH_I2S0_TX,
+		[13] = DMACH_I2S0_RX,
+		[14] = DMACH_SPI0_TX,
+		[15] = DMACH_SPI0_RX,
+		[16] = DMACH_PCM1_TX,
+		[17] = DMACH_PCM1_RX,
+		[18] = DMACH_PCM2_TX,
+		[19] = DMACH_PCM2_RX,
+		[20] = DMACH_SPI1_TX,
+		[21] = DMACH_SPI1_RX,
+		[22] = DMACH_USI_TX,
+		[23] = DMACH_USI_RX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_I2S1_TX,
+		[26] = DMACH_I2S1_RX,
+		[27] = DMACH_I2S2_TX,
+		[28] = DMACH_I2S2_RX,
+		[29] = DMACH_PWM,
+		[30] = DMACH_UART5_RX,
+		[31] = DMACH_UART5_TX,
+	},
+};
+
+static struct platform_device s5p64x0_device_pdma = {
 	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p6440_pdma_resource),
-	.resource	= s5p6440_pdma_resource,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_pdma_resource),
+	.resource	= s5p64x0_pdma_resource,
 	.dev		= {
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5p6440_pdma_pdata,
 	},
 };
 
-static struct platform_device *s5p6440_dmacs[] __initdata = {
-	&s5p6440_device_pdma,
-};
-
-static int __init s5p6440_dma_init(void)
+static int __init s5p64x0_dma_init(void)
 {
-	platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs));
+	unsigned int id;
+
+	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
+
+	if (id == 0x50000)
+		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+	else
+		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+
+	platform_device_register(&s5p64x0_device_pdma);
 
 	return 0;
 }
-arch_initcall(s5p6440_dma_init);
+arch_initcall(s5p64x0_dma_init);

arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h

@@ -32,6 +32,12 @@ enum dma_ch {
 	DMACH_UART2_TX,
 	DMACH_UART3_RX,
 	DMACH_UART3_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_UART5_RX,
+	DMACH_UART5_TX,
+	DMACH_USI_RX,
+	DMACH_USI_TX,
 	DMACH_IRDA,
 	DMACH_I2S0_RX,
 	DMACH_I2S0_TX,
@@ -64,6 +70,20 @@ enum dma_ch {
 	DMACH_MSM_REQ2,
 	DMACH_MSM_REQ1,
 	DMACH_MSM_REQ0,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
 	/* END Marker, also used to denote a reserved channel */
 	DMACH_MAX,
 };