ASoC: ti: Merge davinci and omap directories

Create new directory to contain all Texas Instruments specific DAI,
platform and machine drivers instead of scattering them under davinci and
omap directories.

There is already inter dependency between the two directories becasue of
McASP (on dra7x it is serviced by sDMA, not EDMA).

With the upcoming AM654 we will need to introduce new platform driver for
UDMA and it does not fit under davinci, nor under omap.

With the move I have restructured the Kconfig to be more usable in the era
of simple-sound-card:
CPU DAIs can be selected individually and they will select the platform
driver they can be served with.

To avoid breakage, I have moved over deprecated Kconfig options so
defconfig builds will work without regression.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
For sound/soc/{omap => ti}:
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/Kconfig

@@ -46,13 +46,11 @@ source "sound/soc/atmel/Kconfig"
 source "sound/soc/au1x/Kconfig"
 source "sound/soc/bcm/Kconfig"
 source "sound/soc/cirrus/Kconfig"
-source "sound/soc/davinci/Kconfig"
 source "sound/soc/dwc/Kconfig"
 source "sound/soc/fsl/Kconfig"
 source "sound/soc/hisilicon/Kconfig"
 source "sound/soc/jz4740/Kconfig"
 source "sound/soc/nuc900/Kconfig"
-source "sound/soc/omap/Kconfig"
 source "sound/soc/kirkwood/Kconfig"
 source "sound/soc/img/Kconfig"
 source "sound/soc/intel/Kconfig"
@@ -70,6 +68,7 @@ source "sound/soc/sti/Kconfig"
 source "sound/soc/stm/Kconfig"
 source "sound/soc/sunxi/Kconfig"
 source "sound/soc/tegra/Kconfig"
+source "sound/soc/ti/Kconfig"
 source "sound/soc/txx9/Kconfig"
 source "sound/soc/uniphier/Kconfig"
 source "sound/soc/ux500/Kconfig"

sound/soc/Makefile

@@ -30,7 +30,6 @@ obj-$(CONFIG_SND_SOC)	+= atmel/
 obj-$(CONFIG_SND_SOC)	+= au1x/
 obj-$(CONFIG_SND_SOC)	+= bcm/
 obj-$(CONFIG_SND_SOC)	+= cirrus/
-obj-$(CONFIG_SND_SOC)	+= davinci/
 obj-$(CONFIG_SND_SOC)	+= dwc/
 obj-$(CONFIG_SND_SOC)	+= fsl/
 obj-$(CONFIG_SND_SOC)	+= hisilicon/
@@ -41,7 +40,6 @@ obj-$(CONFIG_SND_SOC)	+= mediatek/
 obj-$(CONFIG_SND_SOC)	+= meson/
 obj-$(CONFIG_SND_SOC)	+= mxs/
 obj-$(CONFIG_SND_SOC)	+= nuc900/
-obj-$(CONFIG_SND_SOC)	+= omap/
 obj-$(CONFIG_SND_SOC)	+= kirkwood/
 obj-$(CONFIG_SND_SOC)	+= pxa/
 obj-$(CONFIG_SND_SOC)	+= qcom/
@@ -54,6 +52,7 @@ obj-$(CONFIG_SND_SOC)	+= sti/
 obj-$(CONFIG_SND_SOC)	+= stm/
 obj-$(CONFIG_SND_SOC)	+= sunxi/
 obj-$(CONFIG_SND_SOC)	+= tegra/
+obj-$(CONFIG_SND_SOC)	+= ti/
 obj-$(CONFIG_SND_SOC)	+= txx9/
 obj-$(CONFIG_SND_SOC)	+= uniphier/
 obj-$(CONFIG_SND_SOC)	+= ux500/

sound/soc/davinci/Kconfig

-config SND_DAVINCI_SOC
-	tristate
-	depends on ARCH_DAVINCI
-	select SND_EDMA_SOC
-
-config SND_EDMA_SOC
-	tristate "SoC Audio for Texas Instruments chips using eDMA"
-	depends on TI_EDMA
-	select SND_SOC_GENERIC_DMAENGINE_PCM
-	help
-	  Say Y or M here if you want audio support for TI SoC which uses eDMA.
-	  The following line of SoCs are supported by this platform driver:
-	  - daVinci devices
-	  - AM335x
-	  - AM437x/AM438x
-	  - DRA7xx family
-
-config SND_DAVINCI_SOC_I2S
-	tristate "DaVinci Multichannel Buffered Serial Port (McBSP) support"
-	depends on SND_EDMA_SOC
-	help
-	  Say Y or M here if you want to have support for McBSP IP found in
-	  Texas Instruments DaVinci DA850 SoCs.
-
-config SND_DAVINCI_SOC_MCASP
-	tristate "Multichannel Audio Serial Port (McASP) support"
-	depends on SND_SDMA_SOC || SND_EDMA_SOC
-	help
-	  Say Y or M here if you want to have support for McASP IP found in
-	  various Texas Instruments SoCs like:
-	  - daVinci devices
-	  - Sitara line of SoCs (AM335x, AM438x, etc)
-	  - DRA7x devices
-
-config SND_DAVINCI_SOC_VCIF
-	tristate
-
-config SND_DAVINCI_SOC_GENERIC_EVM
-	tristate
-	select SND_SOC_TLV320AIC3X
-	select SND_DAVINCI_SOC_MCASP
-
-config SND_AM33XX_SOC_EVM
-	tristate "SoC Audio for the AM33XX chip based boards"
-	depends on SND_EDMA_SOC && SOC_AM33XX && I2C
-	select SND_DAVINCI_SOC_GENERIC_EVM
-	help
-	  Say Y or M if you want to add support for SoC audio on AM33XX
-	  boards using McASP and TLV320AIC3X codec. For example AM335X-EVM,
-	  AM335X-EVMSK, and BeagelBone with AudioCape boards have this
-	  setup.
-
-config SND_DAVINCI_SOC_EVM
-	tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM"
-	depends on SND_EDMA_SOC && I2C
-	depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM || MACH_DAVINCI_DM365_EVM
-	select SND_DAVINCI_SOC_GENERIC_EVM
-	help
-	  Say Y if you want to add support for SoC audio on TI
-	  DaVinci DM6446, DM355 or DM365 EVM platforms.
-
-choice
-	prompt "DM365 codec select"
-	depends on SND_DAVINCI_SOC_EVM
-	depends on MACH_DAVINCI_DM365_EVM
-
-config SND_DM365_AIC3X_CODEC
-	tristate "Audio Codec - AIC3101"
-	help
-	  Say Y if you want to add support for AIC3101 audio codec
-
-config SND_DM365_VOICE_CODEC
-	tristate "Voice Codec - CQ93VC"
-	select MFD_DAVINCI_VOICECODEC
-	select SND_DAVINCI_SOC_VCIF
-	select SND_SOC_CQ0093VC
-	help
-	  Say Y if you want to add support for SoC On-chip voice codec
-endchoice
-
-config  SND_DM6467_SOC_EVM
-	tristate "SoC Audio support for DaVinci DM6467 EVM"
-	depends on SND_EDMA_SOC && MACH_DAVINCI_DM6467_EVM && I2C
-	select SND_DAVINCI_SOC_GENERIC_EVM
-	select SND_SOC_SPDIF
-
-	help
-	  Say Y if you want to add support for SoC audio on TI
-
-config  SND_DA830_SOC_EVM
-	tristate "SoC Audio support for DA830/OMAP-L137 EVM"
-	depends on SND_EDMA_SOC && MACH_DAVINCI_DA830_EVM && I2C
-	select SND_DAVINCI_SOC_GENERIC_EVM
-
-	help
-	  Say Y if you want to add support for SoC audio on TI
-	  DA830/OMAP-L137 EVM
-
-config  SND_DA850_SOC_EVM
-	tristate "SoC Audio support for DA850/OMAP-L138 EVM"
-	depends on SND_EDMA_SOC && MACH_DAVINCI_DA850_EVM && I2C
-	select SND_DAVINCI_SOC_GENERIC_EVM
-	help
-	  Say Y if you want to add support for SoC audio on TI
-	  DA850/OMAP-L138 EVM
-

sound/soc/davinci/Makefile

-# SPDX-License-Identifier: GPL-2.0
-# DAVINCI Platform Support
-snd-soc-edma-objs := edma-pcm.o
-snd-soc-davinci-i2s-objs := davinci-i2s.o
-snd-soc-davinci-mcasp-objs:= davinci-mcasp.o
-snd-soc-davinci-vcif-objs:= davinci-vcif.o
-
-obj-$(CONFIG_SND_EDMA_SOC) += snd-soc-edma.o
-obj-$(CONFIG_SND_DAVINCI_SOC_I2S) += snd-soc-davinci-i2s.o
-obj-$(CONFIG_SND_DAVINCI_SOC_MCASP) += snd-soc-davinci-mcasp.o
-obj-$(CONFIG_SND_DAVINCI_SOC_VCIF) += snd-soc-davinci-vcif.o
-
-# Generic DAVINCI/AM33xx Machine Support
-snd-soc-evm-objs := davinci-evm.o
-
-obj-$(CONFIG_SND_DAVINCI_SOC_GENERIC_EVM) += snd-soc-evm.o

sound/soc/omap/Kconfig

-config SND_OMAP_SOC
-	tristate "SoC Audio for Texas Instruments OMAP chips (deprecated)"
-	depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST)
-	select SND_SDMA_SOC
-
-config SND_SDMA_SOC
-	tristate "SoC Audio for Texas Instruments chips using sDMA"
-	depends on DMA_OMAP || COMPILE_TEST
-	select SND_SOC_GENERIC_DMAENGINE_PCM
-
-config SND_OMAP_SOC_DMIC
-	tristate
-
-config SND_OMAP_SOC_MCBSP
-	tristate
-
-config SND_OMAP_SOC_MCPDM
-	tristate
-
-config SND_OMAP_SOC_HDMI_AUDIO
-	tristate "HDMI audio support for OMAP4+ based SoCs"
-	depends on SND_SDMA_SOC
-	help
-	  For HDMI audio to work OMAPDSS HDMI support should be
-	  enabled.
-	  The hdmi audio driver implements cpu-dai component using the
-	  callbacks provided by OMAPDSS and registers the component
-	  under DSS HDMI device. Omap-pcm is registered for platform
-	  component also under DSS HDMI device. Dummy codec is used as
-	  as codec component. The hdmi audio driver implements also
-	  the card and registers it under its own platform device.
-	  The device for the driver is registered by OMAPDSS hdmi
-	  driver.
-
-config SND_OMAP_SOC_N810
-	tristate "SoC Audio support for Nokia N810"
-	depends on SND_SDMA_SOC && MACH_NOKIA_N810 && I2C
-	select SND_OMAP_SOC_MCBSP
-	select SND_SOC_TLV320AIC3X
-	help
-	  Say Y if you want to add support for SoC audio on Nokia N810.
-
-config SND_OMAP_SOC_RX51
-	tristate "SoC Audio support for Nokia N900 (RX-51)"
-	depends on SND_SDMA_SOC && ARM && I2C
-	select SND_OMAP_SOC_MCBSP
-	select SND_SOC_TLV320AIC3X
-	select SND_SOC_TPA6130A2
-	depends on GPIOLIB
-	help
-	  Say Y if you want to add support for SoC audio on Nokia N900
-	  cellphone.
-
-config SND_OMAP_SOC_AMS_DELTA
-	tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
-	depends on SND_SDMA_SOC && MACH_AMS_DELTA && TTY
-	select SND_OMAP_SOC_MCBSP
-	select SND_SOC_CX20442
-	help
-	  Say Y  if you want to add support  for SoC audio device  connected to
-	  a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
-
-	  Note that in order to get those devices fully supported,  you have to
-	  build  the kernel  with  standard  serial port  driver  included  and
-	  configured for at least 4 ports.  Then, from userspace, you must load
-	  a line discipline #19 on the modem (ttyS3) serial line.  The simplest
-	  way to achieve this is to install util-linux-ng  and use the included
-	  ldattach  utility.  This  can be  started  automatically  from  udev,
-	  a simple rule like this one should do the trick (it does for me):
-	  	ACTION=="add", KERNEL=="controlC0", \
-				RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
-
-config SND_OMAP_SOC_OSK5912
-	tristate "SoC Audio support for omap osk5912"
-	depends on SND_SDMA_SOC && MACH_OMAP_OSK && I2C
-	select SND_OMAP_SOC_MCBSP
-	select SND_SOC_TLV320AIC23_I2C
-	help
-	  Say Y if you want to add support for SoC audio on osk5912.
-
-config SND_OMAP_SOC_OMAP_TWL4030
-	tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
-	depends on TWL4030_CORE && SND_SDMA_SOC
-	select SND_OMAP_SOC_MCBSP
-	select SND_SOC_TWL4030
-	help
-	  Say Y if you want to add support for SoC audio on TI SoC based boards
-	  using twl4030 as c codec. This driver currently supports:
-	  - Beagleboard or Devkit8000
-	  - Gumstix Overo or CompuLab CM-T35/CM-T3730
-	  - IGEP v2
-	  - OMAP3EVM
-	  - SDP3430
-	  - Zoom2
-
-config SND_OMAP_SOC_OMAP_ABE_TWL6040
-	tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
-	depends on TWL6040_CORE && SND_SDMA_SOC && COMMON_CLK
-	depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
-	select SND_OMAP_SOC_DMIC
-	select SND_OMAP_SOC_MCPDM
-	select SND_SOC_TWL6040
-	select SND_SOC_DMIC
-	select COMMON_CLK_PALMAS if (SOC_OMAP5 && MFD_PALMAS)
-	select CLK_TWL6040
-	help
-	  Say Y if you want to add support for SoC audio on OMAP boards using
-	  ABE and twl6040 codec. This driver currently supports:
-	  - SDP4430/Blaze boards
-	  - PandaBoard (4430)
-	  - PandaBoardES (4460)
-	  - omap5-uevm (5432)
-
-config SND_OMAP_SOC_OMAP3_PANDORA
-	tristate "SoC Audio support for OMAP3 Pandora"
-	depends on TWL4030_CORE && SND_SDMA_SOC && MACH_OMAP3_PANDORA
-	select SND_OMAP_SOC_MCBSP
-	select SND_SOC_TWL4030
-	help
-	  Say Y if you want to add support for SoC audio on the OMAP3 Pandora.

sound/soc/omap/Makefile

-# SPDX-License-Identifier: GPL-2.0
-# OMAP Platform Support
-snd-soc-sdma-objs := sdma-pcm.o
-snd-soc-omap-dmic-objs := omap-dmic.o
-snd-soc-omap-mcbsp-objs := omap-mcbsp.o omap-mcbsp-st.o
-snd-soc-omap-mcpdm-objs := omap-mcpdm.o
-snd-soc-omap-hdmi-audio-objs := omap-hdmi-audio.o
-
-obj-$(CONFIG_SND_SDMA_SOC) += snd-soc-sdma.o
-obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o
-obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o
-obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o
-obj-$(CONFIG_SND_OMAP_SOC_HDMI_AUDIO) += snd-soc-omap-hdmi-audio.o
-
-# OMAP Machine Support
-snd-soc-n810-objs := n810.o
-snd-soc-rx51-objs := rx51.o
-snd-soc-ams-delta-objs := ams-delta.o
-snd-soc-osk5912-objs := osk5912.o
-snd-soc-omap-abe-twl6040-objs := omap-abe-twl6040.o
-snd-soc-omap-twl4030-objs := omap-twl4030.o
-snd-soc-omap3pandora-objs := omap3pandora.o
-
-obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
-obj-$(CONFIG_SND_OMAP_SOC_RX51) += snd-soc-rx51.o
-obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o
-obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o
-obj-$(CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040) += snd-soc-omap-abe-twl6040.o
-obj-$(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) += snd-soc-omap-twl4030.o
-obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o

sound/soc/ti/Makefile

+# SPDX-License-Identifier: GPL-2.0
+
+# Platform drivers
+snd-soc-ti-edma-objs := edma-pcm.o
+snd-soc-ti-sdma-objs := sdma-pcm.o
+
+obj-$(CONFIG_SND_SOC_TI_EDMA_PCM) += snd-soc-ti-edma.o
+obj-$(CONFIG_SND_SOC_TI_SDMA_PCM) += snd-soc-ti-sdma.o
+
+# CPU DAI drivers
+snd-soc-davinci-asp-objs := davinci-i2s.o
+snd-soc-davinci-mcasp-objs := davinci-mcasp.o
+snd-soc-davinci-vcif-objs := davinci-vcif.o
+snd-soc-omap-dmic-objs := omap-dmic.o
+snd-soc-omap-mcbsp-objs := omap-mcbsp.o omap-mcbsp-st.o
+snd-soc-omap-mcpdm-objs := omap-mcpdm.o
+
+obj-$(CONFIG_SND_SOC_DAVINCI_ASP) += snd-soc-davinci-asp.o
+obj-$(CONFIG_SND_SOC_DAVINCI_MCASP) += snd-soc-davinci-mcasp.o
+obj-$(CONFIG_SND_SOC_DAVINCI_VCIF) += snd-soc-davinci-vcif.o
+obj-$(CONFIG_SND_SOC_OMAP_DMIC) += snd-soc-omap-dmic.o
+obj-$(CONFIG_SND_SOC_OMAP_MCBSP) += snd-soc-omap-mcbsp.o
+obj-$(CONFIG_SND_SOC_OMAP_MCPDM) += snd-soc-omap-mcpdm.o
+
+# Machine drivers
+snd-soc-davinci-evm-objs := davinci-evm.o
+snd-soc-n810-objs := n810.o
+snd-soc-rx51-objs := rx51.o
+snd-soc-omap3pandora-objs := omap3pandora.o
+snd-soc-omap-twl4030-objs := omap-twl4030.o
+snd-soc-omap-abe-twl6040-objs := omap-abe-twl6040.o
+snd-soc-ams-delta-objs := ams-delta.o
+snd-soc-omap-hdmi-objs := omap-hdmi.o
+snd-soc-osk5912-objs := osk5912.o
+
+obj-$(CONFIG_SND_SOC_DAVINCI_EVM) += snd-soc-davinci-evm.o
+obj-$(CONFIG_SND_SOC_NOKIA_N810) += snd-soc-n810.o
+obj-$(CONFIG_SND_SOC_NOKIA_RX51) += snd-soc-rx51.o
+obj-$(CONFIG_SND_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
+obj-$(CONFIG_SND_SOC_OMAP3_TWL4030) += snd-soc-omap-twl4030.o
+obj-$(CONFIG_SND_SOC_OMAP_ABE_TWL6040) += snd-soc-omap-abe-twl6040.o
+obj-$(CONFIG_SND_SOC_OMAP_AMS_DELTA) += snd-soc-ams-delta.o
+obj-$(CONFIG_SND_SOC_OMAP_HDMI) += snd-soc-omap-hdmi.o
+obj-$(CONFIG_SND_SOC_OMAP_OSK5912) += snd-soc-osk5912.o

sound/soc/davinci/davinci-evm.c → sound/soc/ti/davinci-evm.c

@@ -170,7 +170,7 @@ static struct snd_soc_dai_link dm355_evm_dai = {
 };
 
 static struct snd_soc_dai_link dm365_evm_dai = {
-#ifdef CONFIG_SND_DM365_AIC3X_CODEC
+#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC
 	.name = "TLV320AIC3X",
 	.stream_name = "AIC3X",
 	.cpu_dai_name = "davinci-mcbsp",
@@ -181,7 +181,7 @@ static struct snd_soc_dai_link dm365_evm_dai = {
 	.ops = &evm_ops,
 	.dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM |
 		   SND_SOC_DAIFMT_IB_NF,
-#elif defined(CONFIG_SND_DM365_VOICE_CODEC)
+#elif defined(CONFIG_SND_SOC_DM365_VOICE_CODEC)
 	.name = "Voice Codec - CQ93VC",
 	.stream_name = "CQ93",
 	.cpu_dai_name = "davinci-vcif",

sound/soc/davinci/davinci-mcasp.c → sound/soc/ti/davinci-mcasp.c

@@ -39,7 +39,7 @@
 #include <sound/dmaengine_pcm.h>
 
 #include "edma-pcm.h"
-#include "../omap/sdma-pcm.h"
+#include "sdma-pcm.h"
 #include "davinci-mcasp.h"
 
 #define MCASP_MAX_AFIFO_DEPTH	64
@@ -2149,9 +2149,9 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 	ret = davinci_mcasp_get_dma_type(mcasp);
 	switch (ret) {
 	case PCM_EDMA:
-#if IS_BUILTIN(CONFIG_SND_EDMA_SOC) || \
-	(IS_MODULE(CONFIG_SND_DAVINCI_SOC_MCASP) && \
-	 IS_MODULE(CONFIG_SND_EDMA_SOC))
+#if IS_BUILTIN(CONFIG_SND_SOC_TI_EDMA_PCM) || \
+	(IS_MODULE(CONFIG_SND_SOC_DAVINCI_MCASP) && \
+	 IS_MODULE(CONFIG_SND_SOC_TI_EDMA_PCM))
 		ret = edma_pcm_platform_register(&pdev->dev);
 #else
 		dev_err(&pdev->dev, "Missing SND_EDMA_SOC\n");
@@ -2160,9 +2160,9 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 #endif
 		break;
 	case PCM_SDMA:
-#if IS_BUILTIN(CONFIG_SND_SDMA_SOC) || \
-	(IS_MODULE(CONFIG_SND_DAVINCI_SOC_MCASP) && \
-	 IS_MODULE(CONFIG_SND_SDMA_SOC))
+#if IS_BUILTIN(CONFIG_SND_SOC_TI_SDMA_PCM) || \
+	(IS_MODULE(CONFIG_SND_SOC_DAVINCI_MCASP) && \
+	 IS_MODULE(CONFIG_SND_SOC_TI_SDMA_PCM))
 		ret = sdma_pcm_platform_register(&pdev->dev, NULL, NULL);
 #else
 		dev_err(&pdev->dev, "Missing SND_SDMA_SOC\n");

sound/soc/davinci/edma-pcm.h → sound/soc/ti/edma-pcm.h

@@ -20,13 +20,13 @@
 #ifndef __EDMA_PCM_H__
 #define __EDMA_PCM_H__
 
-#if IS_ENABLED(CONFIG_SND_EDMA_SOC)
+#if IS_ENABLED(CONFIG_SND_SOC_TI_EDMA_PCM)
 int edma_pcm_platform_register(struct device *dev);
 #else
 static inline int edma_pcm_platform_register(struct device *dev)
 {
 	return 0;
 }
-#endif /* CONFIG_SND_EDMA_SOC */
+#endif /* CONFIG_SND_SOC_TI_EDMA_PCM */
 
 #endif /* __EDMA_PCM_H__ */

sound/soc/omap/sdma-pcm.h → sound/soc/ti/sdma-pcm.h

@@ -7,7 +7,7 @@
 #ifndef __SDMA_PCM_H__
 #define __SDMA_PCM_H__
 
-#if IS_ENABLED(CONFIG_SND_SDMA_SOC)
+#if IS_ENABLED(CONFIG_SND_SOC_TI_SDMA_PCM)
 int sdma_pcm_platform_register(struct device *dev,
 			       char *txdmachan, char *rxdmachan);
 #else
@@ -16,6 +16,6 @@ static inline int sdma_pcm_platform_register(struct device *dev,
 {
 	return -ENODEV;
 }
-#endif /* CONFIG_SND_SDMA_SOC */
+#endif /* CONFIG_SND_SOC_TI_SDMA_PCM */
 
 #endif /* __SDMA_PCM_H__ */