perf_events, x86: Split PMU definitions into separate files

Split amd,p6,intel into separate files so that we can easily deal with
CONFIG_CPU_SUP_* things, needed to make things build now that perf_event.c
relies on symbols from amd.c
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/kernel/cpu/perf_event_p6.c

+#ifdef CONFIG_CPU_SUP_INTEL
+
+/*
+ * Not sure about some of these
+ */
+static const u64 p6_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0079,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0f2e,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x012e,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+  [PERF_COUNT_HW_BUS_CYCLES]		= 0x0062,
+};
+
+static u64 p6_pmu_event_map(int hw_event)
+{
+	return p6_perfmon_event_map[hw_event];
+}
+
+/*
+ * Event setting that is specified not to count anything.
+ * We use this to effectively disable a counter.
+ *
+ * L2_RQSTS with 0 MESI unit mask.
+ */
+#define P6_NOP_EVENT			0x0000002EULL
+
+static u64 p6_pmu_raw_event(u64 hw_event)
+{
+#define P6_EVNTSEL_EVENT_MASK		0x000000FFULL
+#define P6_EVNTSEL_UNIT_MASK		0x0000FF00ULL
+#define P6_EVNTSEL_EDGE_MASK		0x00040000ULL
+#define P6_EVNTSEL_INV_MASK		0x00800000ULL
+#define P6_EVNTSEL_REG_MASK		0xFF000000ULL
+
+#define P6_EVNTSEL_MASK			\
+	(P6_EVNTSEL_EVENT_MASK |	\
+	 P6_EVNTSEL_UNIT_MASK  |	\
+	 P6_EVNTSEL_EDGE_MASK  |	\
+	 P6_EVNTSEL_INV_MASK   |	\
+	 P6_EVNTSEL_REG_MASK)
+
+	return hw_event & P6_EVNTSEL_MASK;
+}
+
+static struct event_constraint p6_event_constraints[] =
+{
+	INTEL_EVENT_CONSTRAINT(0xc1, 0x1),	/* FLOPS */
+	INTEL_EVENT_CONSTRAINT(0x10, 0x1),	/* FP_COMP_OPS_EXE */
+	INTEL_EVENT_CONSTRAINT(0x11, 0x1),	/* FP_ASSIST */
+	INTEL_EVENT_CONSTRAINT(0x12, 0x2),	/* MUL */
+	INTEL_EVENT_CONSTRAINT(0x13, 0x2),	/* DIV */
+	INTEL_EVENT_CONSTRAINT(0x14, 0x1),	/* CYCLES_DIV_BUSY */
+	EVENT_CONSTRAINT_END
+};
+
+static void p6_pmu_disable_all(void)
+{
+	u64 val;
+
+	/* p6 only has one enable register */
+	rdmsrl(MSR_P6_EVNTSEL0, val);
+	val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+	wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
+static void p6_pmu_enable_all(void)
+{
+	unsigned long val;
+
+	/* p6 only has one enable register */
+	rdmsrl(MSR_P6_EVNTSEL0, val);
+	val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
+static inline void
+p6_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	u64 val = P6_NOP_EVENT;
+
+	if (cpuc->enabled)
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+	(void)checking_wrmsrl(hwc->config_base + idx, val);
+}
+
+static void p6_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	u64 val;
+
+	val = hwc->config;
+	if (cpuc->enabled)
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+	(void)checking_wrmsrl(hwc->config_base + idx, val);
+}
+
+static __initconst struct x86_pmu p6_pmu = {
+	.name			= "p6",
+	.handle_irq		= x86_pmu_handle_irq,
+	.disable_all		= p6_pmu_disable_all,
+	.enable_all		= p6_pmu_enable_all,
+	.enable			= p6_pmu_enable_event,
+	.disable		= p6_pmu_disable_event,
+	.eventsel		= MSR_P6_EVNTSEL0,
+	.perfctr		= MSR_P6_PERFCTR0,
+	.event_map		= p6_pmu_event_map,
+	.raw_event		= p6_pmu_raw_event,
+	.max_events		= ARRAY_SIZE(p6_perfmon_event_map),
+	.apic			= 1,
+	.max_period		= (1ULL << 31) - 1,
+	.version		= 0,
+	.num_events		= 2,
+	/*
+	 * Events have 40 bits implemented. However they are designed such
+	 * that bits [32-39] are sign extensions of bit 31. As such the
+	 * effective width of a event for P6-like PMU is 32 bits only.
+	 *
+	 * See IA-32 Intel Architecture Software developer manual Vol 3B
+	 */
+	.event_bits		= 32,
+	.event_mask		= (1ULL << 32) - 1,
+	.get_event_constraints	= x86_get_event_constraints,
+	.event_constraints	= p6_event_constraints,
+};
+
+static __init int p6_pmu_init(void)
+{
+	switch (boot_cpu_data.x86_model) {
+	case 1:
+	case 3:  /* Pentium Pro */
+	case 5:
+	case 6:  /* Pentium II */
+	case 7:
+	case 8:
+	case 11: /* Pentium III */
+	case 9:
+	case 13:
+		/* Pentium M */
+		break;
+	default:
+		pr_cont("unsupported p6 CPU model %d ",
+			boot_cpu_data.x86_model);
+		return -ENODEV;
+	}
+
+	x86_pmu = p6_pmu;
+
+	return 0;
+}
+
+#endif /* CONFIG_CPU_SUP_INTEL */