Commit f23f1a1e authored by Marek Vasut's avatar Marek Vasut Committed by Shawn Guo

arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo

Enable CPLD_Dn pull down resistor instead of pull up to avoid
intefering with CPLD power off functionality.

Fixes: 510c527b ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board")
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Reviewed-by: default avatarFabio Estevam <festevam@denx.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 9abf2313
......@@ -250,21 +250,21 @@ MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4
/* SODIMM 96 */
MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4
/* CPLD_D[7] */
MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4
MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x184
/* CPLD_D[6] */
MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4
MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x184
/* CPLD_D[5] */
MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4
MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x184
/* CPLD_D[4] */
MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4
MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x184
/* CPLD_D[3] */
MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4
MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x184
/* CPLD_D[2] */
MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4
MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x184
/* CPLD_D[1] */
MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4
MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x184
/* CPLD_D[0] */
MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4
MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x184
/* KBD_intK */
MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1c4
/* DISP_reset */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment