Commit f26a3988 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] macintosh: Replace deprecated __initcall with device_initcall
  [POWERPC] cell: Fix section mismatches in io-workarounds code
  [POWERPC] spufs: Fix compile error
  [POWERPC] Fix uninitialized variable bug in copy_{to|from}_user
  [POWERPC] Add null pointer check to of_find_property
  [POWERPC] vmemmap fixes to use smaller pages
  [POWERPC] spufs: Fix pointer reference in find_victim
  [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting
  [POWERPC] 85xx: Fix some sparse warnings for 85xx MDS
  [POWERPC] 83xx: Enable DMA engine on the MPC8377 MDS board.
  [POWERPC] 86xx: mpc8610_hpcd: fix second serial port
  [POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes
  [POWERPC] 85xx: Add 8568 PHY workarounds to board code
  [POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernet
parents ac0e9c30 faa5b9da
......@@ -268,6 +268,33 @@ sata@19000 {
interrupt-parent = <&ipic>;
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8349-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <0x47 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8349-dma-channel";
reg = <0 0x80>;
};
dma-channel@80 {
compatible = "fsl,mpc8349-dma-channel";
reg = <0x80 0x80>;
};
dma-channel@100 {
compatible = "fsl,mpc8349-dma-channel";
reg = <0x100 0x80>;
};
dma-channel@180 {
compatible = "fsl,mpc8349-dma-channel";
reg = <0x180 0x28>;
};
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
......
......@@ -46,9 +46,63 @@ memory {
reg = <0x00000000 0x20000000>; // 512M at 0x0
};
board-control@e8000000 {
compatible = "fsl,fpga-pixis";
reg = <0xe8000000 32>; // pixis at 0xe8000000
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
ranges = <0 0 0xf8000000 0x08000000
1 0 0xf0000000 0x08000000
2 0 0xe8400000 0x00008000
4 0 0xe8440000 0x00008000
5 0 0xe8480000 0x00008000
6 0 0xe84c0000 0x00008000
3 0 0xe8000000 0x00000020>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
flash@1,0 {
compatible = "cfi-flash";
reg = <1 0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
flash@2,0 {
compatible = "fsl,mpc8610-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <2 0 0x8000>;
};
flash@4,0 {
compatible = "fsl,mpc8610-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <4 0 0x8000>;
};
flash@5,0 {
compatible = "fsl,mpc8610-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <5 0 0x8000>;
};
flash@6,0 {
compatible = "fsl,mpc8610-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <6 0 0x8000>;
};
board-control@3,0 {
compatible = "fsl,fpga-pixis";
reg = <3 0 0x20>;
};
};
soc@e0000000 {
......
......@@ -52,6 +52,99 @@ memory {
reg = <0x00000000 0x10000000>;
};
localbus@e0000000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "simple-bus";
reg = <0xe0000000 0x5000>;
interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0xff800000 0x00800000 /*8MB Flash*/
0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/
0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/
0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
0x6 0x0 0xfb800000 0x04000000>; /*64MB Flash*/
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x800000>;
bank-width = <1>;
device-width = <1>;
partition@0x0 {
label = "space";
reg = <0x00000000 0x00100000>;
};
partition@0x100000 {
label = "bootloader";
reg = <0x00100000 0x00700000>;
read-only;
};
};
epld@5,0 {
compatible = "wrs,epld-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0x5 0x0 0x00b10000>;
ranges = <
0x0 0x0 0x5 0x000000 0x1fff /* LED */
0x1 0x0 0x5 0x100000 0x1fff /* Switches */
0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */
0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */
>;
led@0,0 {
compatible = "led";
reg = <0x0 0x0 0x1fff>;
};
switches@1,0 {
compatible = "switches";
reg = <0x1 0x0 0x1fff>;
};
hw-rev@3,0 {
compatible = "hw-rev";
reg = <0x3 0x0 0x1fff>;
};
eeprom@b,0 {
compatible = "eeprom";
reg = <0xb 0 0x1fff>;
};
};
alt-flash@6,0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x6 0x0 0x04000000>;
compatible = "cfi-flash";
bank-width = <4>;
device-width = <1>;
partition@0x0 {
label = "bootloader";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@0x00100000 {
label = "file-system";
reg = <0x00100000 0x01f00000>;
};
partition@0x02000000 {
label = "boot-config";
reg = <0x02000000 0x00100000>;
};
partition@0x02100000 {
label = "space";
reg = <0x02100000 0x01f00000>;
};
};
};
soc8548@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
......@@ -59,6 +152,7 @@ soc8548@e0000000 {
ranges = <0x00000000 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
compatible = "simple-bus";
memory-controller@2000 {
compatible = "fsl,8548-memory-controller";
......
......@@ -358,7 +358,93 @@ CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_FSL_ELBC=y
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
......@@ -567,14 +653,11 @@ CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_ULI526X=y
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
......
......@@ -94,6 +94,9 @@ unsigned long htab_hash_mask;
int mmu_linear_psize = MMU_PAGE_4K;
int mmu_virtual_psize = MMU_PAGE_4K;
int mmu_vmalloc_psize = MMU_PAGE_4K;
#ifdef CONFIG_SPARSEMEM_VMEMMAP
int mmu_vmemmap_psize = MMU_PAGE_4K;
#endif
int mmu_io_psize = MMU_PAGE_4K;
int mmu_kernel_ssize = MMU_SEGSIZE_256M;
int mmu_highuser_ssize = MMU_SEGSIZE_256M;
......@@ -387,11 +390,32 @@ static void __init htab_init_page_sizes(void)
}
#endif /* CONFIG_PPC_64K_PAGES */
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/* We try to use 16M pages for vmemmap if that is supported
* and we have at least 1G of RAM at boot
*/
if (mmu_psize_defs[MMU_PAGE_16M].shift &&
lmb_phys_mem_size() >= 0x40000000)
mmu_vmemmap_psize = MMU_PAGE_16M;
else if (mmu_psize_defs[MMU_PAGE_64K].shift)
mmu_vmemmap_psize = MMU_PAGE_64K;
else
mmu_vmemmap_psize = MMU_PAGE_4K;
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
printk(KERN_DEBUG "Page orders: linear mapping = %d, "
"virtual = %d, io = %d\n",
"virtual = %d, io = %d"
#ifdef CONFIG_SPARSEMEM_VMEMMAP
", vmemmap = %d"
#endif
"\n",
mmu_psize_defs[mmu_linear_psize].shift,
mmu_psize_defs[mmu_virtual_psize].shift,
mmu_psize_defs[mmu_io_psize].shift);
mmu_psize_defs[mmu_io_psize].shift
#ifdef CONFIG_SPARSEMEM_VMEMMAP
,mmu_psize_defs[mmu_vmemmap_psize].shift
#endif
);
#ifdef CONFIG_HUGETLB_PAGE
/* Init large page size. Currently, we pick 16M or 1M depending
......
......@@ -19,6 +19,8 @@
*
*/
#undef DEBUG
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
......@@ -208,12 +210,12 @@ int __meminit vmemmap_populated(unsigned long start, int page_size)
}
int __meminit vmemmap_populate(struct page *start_page,
unsigned long nr_pages, int node)
unsigned long nr_pages, int node)
{
unsigned long mode_rw;
unsigned long start = (unsigned long)start_page;
unsigned long end = (unsigned long)(start_page + nr_pages);
unsigned long page_size = 1 << mmu_psize_defs[mmu_linear_psize].shift;
unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
......@@ -235,11 +237,11 @@ int __meminit vmemmap_populate(struct page *start_page,
start, p, __pa(p));
mapped = htab_bolt_mapping(start, start + page_size,
__pa(p), mode_rw, mmu_linear_psize,
__pa(p), mode_rw, mmu_vmemmap_psize,
mmu_kernel_ssize);
BUG_ON(mapped < 0);
}
return 0;
}
#endif
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
......@@ -28,7 +28,7 @@
#include <asm/udbg.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#define DBG(fmt...) printk(fmt)
#else
#define DBG pr_debug
#endif
......@@ -263,13 +263,19 @@ void slb_initialize(void)
extern unsigned int *slb_miss_kernel_load_linear;
extern unsigned int *slb_miss_kernel_load_io;
extern unsigned int *slb_compare_rr_to_size;
#ifdef CONFIG_SPARSEMEM_VMEMMAP
extern unsigned int *slb_miss_kernel_load_vmemmap;
unsigned long vmemmap_llp;
#endif
/* Prepare our SLB miss handler based on our page size */
linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
io_llp = mmu_psize_defs[mmu_io_psize].sllp;
vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
get_paca()->vmalloc_sllp = SLB_VSID_KERNEL | vmalloc_llp;
#ifdef CONFIG_SPARSEMEM_VMEMMAP
vmemmap_llp = mmu_psize_defs[mmu_vmemmap_psize].sllp;
#endif
if (!slb_encoding_inited) {
slb_encoding_inited = 1;
patch_slb_encoding(slb_miss_kernel_load_linear,
......@@ -281,6 +287,12 @@ void slb_initialize(void)
DBG("SLB: linear LLP = %04lx\n", linear_llp);
DBG("SLB: io LLP = %04lx\n", io_llp);
#ifdef CONFIG_SPARSEMEM_VMEMMAP
patch_slb_encoding(slb_miss_kernel_load_vmemmap,
SLB_VSID_KERNEL | vmemmap_llp);
DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
#endif
}
get_paca()->stab_rr = SLB_NUM_BOLTED;
......
......@@ -47,8 +47,7 @@ _GLOBAL(slb_allocate_realmode)
* it to VSID 0, which is reserved as a bad VSID - one which
* will never have any pages in it. */
/* Check if hitting the linear mapping of the vmalloc/ioremap
* kernel space
/* Check if hitting the linear mapping or some other kernel space
*/
bne cr7,1f
......@@ -62,7 +61,18 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
b slb_finish_load_1T
1: /* vmalloc/ioremap mapping encoding bits, the "li" instructions below
1:
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/* Check virtual memmap region. To be patches at kernel boot */
cmpldi cr0,r9,0xf
bne 1f
_GLOBAL(slb_miss_kernel_load_vmemmap)
li r11,0
b 6f
1:
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
/* vmalloc/ioremap mapping encoding bits, the "li" instructions below
* will be patched by the kernel at boot
*/
BEGIN_FTR_SECTION
......
......@@ -32,6 +32,7 @@
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <linux/phy.h>
#include <asm/system.h>
#include <asm/atomic.h>
......@@ -56,6 +57,95 @@
#define DBG(fmt...)
#endif
#define MV88E1111_SCR 0x10
#define MV88E1111_SCR_125CLK 0x0010
static int mpc8568_fixup_125_clock(struct phy_device *phydev)
{
int scr;
int err;
/* Workaround for the 125 CLK Toggle */
scr = phy_read(phydev, MV88E1111_SCR);
if (scr < 0)
return scr;
err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
if (err)
return err;
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err)
return err;
scr = phy_read(phydev, MV88E1111_SCR);
if (scr < 0)
return err;
err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
return err;
}
static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
{
int temp;
int err;
/* Errata */
err = phy_write(phydev,29, 0x0006);
if (err)
return err;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp = (temp & (~0x8000)) | 0x4000;
err = phy_write(phydev,30, temp);
if (err)
return err;
err = phy_write(phydev,29, 0x000a);
if (err)
return err;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp &= ~0x0020;
err = phy_write(phydev,30,temp);
if (err)
return err;
/* Disable automatic MDI/MDIX selection */
temp = phy_read(phydev, 16);
if (temp < 0)
return temp;
temp &= ~0x0060;
err = phy_write(phydev,16,temp);
return err;
}
/* ************************************************************************
*
* Setup the architecture
......@@ -64,7 +154,7 @@
static void __init mpc85xx_mds_setup_arch(void)
{
struct device_node *np;
static u8 *bcsr_regs = NULL;
static u8 __iomem *bcsr_regs = NULL;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
......@@ -138,6 +228,35 @@ static void __init mpc85xx_mds_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
static int __init board_fixups(void)
{
char phy_id[BUS_ID_SIZE];
char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
struct device_node *mdio;
struct resource res;
int i;
for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
of_address_to_resource(mdio, 0, &res);
snprintf(phy_id, BUS_ID_SIZE, "%x:%02x", res.start, 1);
phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
/* Register a workaround for errata */
snprintf(phy_id, BUS_ID_SIZE, "%x:%02x", res.start, 7);
phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
of_node_put(mdio);
}
return 0;
}
machine_arch_initcall(mpc85xx_mds, board_fixups);
static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
......
......@@ -49,6 +49,8 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
static int sbc_rev;
static void __init sbc8548_pic_init(void)
{
struct mpic *mpic;
......@@ -79,6 +81,30 @@ static void __init sbc8548_pic_init(void)
mpic_init(mpic);
}
/* Extract the HW Rev from the EPLD on the board */
static int __init sbc8548_hw_rev(void)
{
struct device_node *np;
struct resource res;
unsigned int *rev;
int board_rev = 0;
np = of_find_compatible_node(NULL, NULL, "hw-rev");
if (np == NULL) {
printk("No HW-REV found in DTB.\n");
return -ENODEV;
}
of_address_to_resource(np, 0, &res);
of_node_put(np);
rev = ioremap(res.start,sizeof(unsigned int));
board_rev = (*rev) >> 28;
iounmap(rev);
return board_rev;
}
/*
* Setup the architecture
*/
......@@ -104,6 +130,7 @@ static void __init sbc8548_setup_arch(void)
}
}
#endif
sbc_rev = sbc8548_hw_rev();
}
static void sbc8548_show_cpuinfo(struct seq_file *m)
......@@ -115,7 +142,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Wind River\n");
seq_printf(m, "Machine\t\t: SBC8548\n");
seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev);
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
......@@ -130,6 +157,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "soc", },
{ .type = "soc", },
{ .compatible = "simple-bus", },
{},
};
......
......@@ -43,6 +43,7 @@ static unsigned char *pixis_bdcfg0, *pixis_arch;
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
{ .compatible = "simple-bus", },
{}
};
......@@ -216,11 +217,21 @@ void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
}
}
#define PX_BRDCFG0_DVISEL (1 << 3)
#define PX_BRDCFG0_DLINK (1 << 4)
#define PX_BRDCFG0_DIU_MASK (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
void mpc8610hpcd_set_monitor_port(int monitor_port)
{
static const u8 bdcfg[] = {0xBD, 0xB5, 0xA5};
static const u8 bdcfg[] = {
PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
PX_BRDCFG0_DLINK,
0,
};
if (monitor_port < 3)
*pixis_bdcfg0 = bdcfg[monitor_port];
clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
bdcfg[monitor_port]);
}
void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
......
......@@ -118,7 +118,7 @@ static void iowa_##name at \
#undef DEF_PCI_AC_RET
#undef DEF_PCI_AC_NORET
static struct ppc_pci_io __initdata iowa_pci_io = {
static const struct ppc_pci_io __devinitconst iowa_pci_io = {
#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) .name = iowa_##name,
#define DEF_PCI_AC_NORET(name, at, al, space, aa) .name = iowa_##name,
......@@ -146,7 +146,7 @@ static void __iomem *iowa_ioremap(unsigned long addr, unsigned long size,
}
/* Regist new bus to support workaround */
void __init iowa_register_bus(struct pci_controller *phb,
void __devinit iowa_register_bus(struct pci_controller *phb,
struct ppc_pci_io *ops,
int (*initfunc)(struct iowa_bus *, void *), void *data)
{
......@@ -173,7 +173,7 @@ void __init iowa_register_bus(struct pci_controller *phb,
}
/* enable IO workaround */
void __init io_workaround_init(void)
void __devinit io_workaround_init(void)
{
static int io_workaround_inited;
......
......@@ -31,9 +31,9 @@ struct iowa_bus {
void *private;
};
void __init io_workaround_init(void);
void __init iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
int (*)(struct iowa_bus *, void *), void *);
void __devinit io_workaround_init(void);
void __devinit iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
int (*)(struct iowa_bus *, void *), void *);
struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR);
struct iowa_bus *iowa_pio_find_bus(unsigned long);
......
......@@ -32,6 +32,7 @@
#include <linux/marker.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/spu.h>
#include <asm/spu_info.h>
#include <asm/uaccess.h>
......
......@@ -659,7 +659,7 @@ static struct spu *find_victim(struct spu_context *ctx)
victim->stats.invol_ctx_switch++;
spu->stats.invol_ctx_switch++;
if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
if (test_bit(SPU_SCHED_SPU_RUN, &victim->sched_flags))
spu_add_to_rq(victim);
mutex_unlock(&victim->state_mutex);
......
......@@ -334,7 +334,7 @@ int __init adb_init(void)
return 0;
}
__initcall(adb_init);
device_initcall(adb_init);
static int
do_adb_reset_bus(void)
......
......@@ -65,6 +65,9 @@ struct property *of_find_property(const struct device_node *np,
{
struct property *pp;
if (!np)
return NULL;
read_lock(&devtree_lock);
for (pp = np->properties; pp != 0; pp = pp->next) {
if (of_prop_cmp(pp->name, name) == 0) {
......
......@@ -177,6 +177,7 @@ extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
extern int mmu_linear_psize;
extern int mmu_virtual_psize;
extern int mmu_vmalloc_psize;
extern int mmu_vmemmap_psize;
extern int mmu_io_psize;
extern int mmu_kernel_ssize;
extern int mmu_highuser_ssize;
......
......@@ -65,15 +65,15 @@
#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START))
#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET))
#define VMEMMAP_REGION_ID (0xfUL)
#define USER_REGION_ID (0UL)
/*
* Defines the address of the vmemap area, in the top 16th of the
* kernel region.
* Defines the address of the vmemap area, in its own region
*/
#define VMEMMAP_BASE (ASM_CONST(CONFIG_KERNEL_START) + \
(0xfUL << (REGION_SHIFT - 4)))
#define vmemmap ((struct page *)VMEMMAP_BASE)
#define VMEMMAP_BASE (VMEMMAP_REGION_ID << REGION_SHIFT)
#define vmemmap ((struct page *)VMEMMAP_BASE)
/*
* Common bits in a linux-style PTE. These match the bits in the
......
......@@ -380,7 +380,7 @@ static inline unsigned long __copy_from_user_inatomic(void *to,
const void __user *from, unsigned long n)
{
if (__builtin_constant_p(n) && (n <= 8)) {
unsigned long ret;
unsigned long ret = 1;
switch (n) {
case 1:
......@@ -406,7 +406,7 @@ static inline unsigned long __copy_to_user_inatomic(void __user *to,
const void *from, unsigned long n)
{
if (__builtin_constant_p(n) && (n <= 8)) {
unsigned long ret;
unsigned long ret = 1;
switch (n) {
case 1:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment