Commit f29d2455 authored by Richard Purdie's avatar Richard Purdie Committed by Russell King

[ARM] 2913/1: PXA Poodle: Cleanup some unneeded code

Patch from Richard Purdie

This patch cleans up the PXA Poodle platform code removing an unneeded
static iomap. It also corrects errors in the platform header file and
adds a missing GPIO define.
Signed-off-by: default avatarRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent fdce05bb
......@@ -126,6 +126,15 @@ static void __init poodle_init(void)
{
int ret = 0;
/* setup sleep mode values */
PWER = 0x00000002;
PFER = 0x00000000;
PRER = 0x00000002;
PGSR0 = 0x00008000;
PGSR1 = 0x003F0202;
PGSR2 = 0x0001C000;
PCFR |= PCFR_OPDE;
/* cpu initialize */
/* Pgsr Register */
PGSR0 = 0x0146dd80;
......@@ -171,32 +180,12 @@ static void __init fixup_poodle(struct machine_desc *desc,
sharpsl_save_param();
}
static struct map_desc poodle_io_desc[] __initdata = {
/* virtual physical length */
{ 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
};
static void __init poodle_map_io(void)
{
pxa_map_io();
iotable_init(poodle_io_desc, ARRAY_SIZE(poodle_io_desc));
/* setup sleep mode values */
PWER = 0x00000002;
PFER = 0x00000000;
PRER = 0x00000002;
PGSR0 = 0x00008000;
PGSR1 = 0x003F0202;
PGSR2 = 0x0001C000;
PCFR |= PCFR_OPDE;
}
MACHINE_START(POODLE, "SHARP Poodle")
.phys_ram = 0xa0000000,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_poodle,
.map_io = poodle_map_io,
.map_io = pxa_map_io,
.init_irq = pxa_init_irq,
.timer = &pxa_timer,
.init_machine = poodle_init,
......
......@@ -37,24 +37,25 @@
#define POODLE_GPIO_nSD_DETECT (9)
#define POODLE_GPIO_MAIN_BAT_LOW (13)
#define POODLE_GPIO_BAT_COVER (13)
#define POODLE_GPIO_USB_PULLUP (20)
#define POODLE_GPIO_ADC_TEMP_ON (21)
#define POODLE_GPIO_BYPASS_ON (36)
#define POODLE_GPIO_CHRG_ON (38)
#define POODLE_GPIO_CHRG_FULL (16)
/* PXA GPIOs */
#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO0
#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO1
#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO4
#define POODLE_IRQ_GPIO_CO IRQ_GPIO16
#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO5
#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO11
#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO10
#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO17
#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO14
#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO8
#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO9
#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO13
#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0)
#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1)
#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4)
#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16)
#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5)
#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11)
#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10)
#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17)
#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14)
#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8)
#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9)
#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13)
/* SCOOP GPIOs */
#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment