iio: chemical: bme680: Add read buffers in read/write buffer union

Move the buffers that are used in order to read data from the device in
the union which handles all the device read/write buffers. Also create
defines for the number of bytes that are being read from the device and
don't use magic numbers.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-10-vassilisamir@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/chemical/bme680.h

@@ -56,6 +56,13 @@
 #define   BME680_GAS_MEAS_BIT			BIT(6)
 #define   BME680_MEAS_BIT			BIT(5)
 
+#define BME680_TEMP_NUM_BYTES			3
+#define BME680_PRESS_NUM_BYTES			3
+#define BME680_HUMID_NUM_BYTES			2
+#define BME680_GAS_NUM_BYTES			2
+
+#define BME680_MEAS_TRIM_MASK			GENMASK(24, 4)
+
 /* Calibration Parameters */
 #define BME680_T2_LSB_REG	0x8A
 #define BME680_H2_MSB_REG	0xE1

drivers/iio/chemical/bme680_core.c

@@ -111,6 +111,9 @@ struct bme680_data {
 	s32 t_fine;
 
 	union {
+		u8 buf[3];
+		unsigned int check;
+		__be16 be16;
 		u8 bme680_cal_buf_1[BME680_CALIB_RANGE_1_LEN];
 		u8 bme680_cal_buf_2[BME680_CALIB_RANGE_2_LEN];
 		u8 bme680_cal_buf_3[BME680_CALIB_RANGE_3_LEN];
@@ -449,7 +452,6 @@ static u8 bme680_oversampling_to_reg(u8 val)
 static int bme680_wait_for_eoc(struct bme680_data *data)
 {
 	struct device *dev = regmap_get_device(data->regmap);
-	unsigned int check;
 	int ret;
 	/*
 	 * (Sum of oversampling ratios * time per oversampling) +
@@ -462,16 +464,16 @@ static int bme680_wait_for_eoc(struct bme680_data *data)
 
 	usleep_range(wait_eoc_us, wait_eoc_us + 100);
 
-	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check);
+	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &data->check);
 	if (ret) {
 		dev_err(dev, "failed to read measurement status register.\n");
 		return ret;
 	}
-	if (check & BME680_MEAS_BIT) {
+	if (data->check & BME680_MEAS_BIT) {
 		dev_err(dev, "Device measurement cycle incomplete.\n");
 		return -EBUSY;
 	}
-	if (!(check & BME680_NEW_DATA_BIT)) {
+	if (!(data->check & BME680_NEW_DATA_BIT)) {
 		dev_err(dev, "No new data available from the device.\n");
 		return -ENODATA;
 	}
@@ -560,7 +562,6 @@ static int bme680_read_temp(struct bme680_data *data, int *val)
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
-	__be32 tmp = 0;
 	u32 adc_temp;
 	s16 comp_temp;
 
@@ -574,13 +575,14 @@ static int bme680_read_temp(struct bme680_data *data, int *val)
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_TEMP_MSB,
-			       &tmp, 3);
+			       data->buf, BME680_TEMP_NUM_BYTES);
 	if (ret < 0) {
 		dev_err(dev, "failed to read temperature\n");
 		return ret;
 	}
 
-	adc_temp = be32_to_cpu(tmp) >> 12;
+	adc_temp = FIELD_GET(BME680_MEAS_TRIM_MASK,
+			     get_unaligned_be24(data->buf));
 	if (adc_temp == BME680_MEAS_SKIPPED) {
 		/* reading was skipped */
 		dev_err(dev, "reading temperature skipped\n");
@@ -606,7 +608,6 @@ static int bme680_read_press(struct bme680_data *data,
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
-	__be32 tmp = 0;
 	u32 adc_press;
 
 	/* Read and compensate temperature to get a reading of t_fine */
@@ -615,13 +616,14 @@ static int bme680_read_press(struct bme680_data *data,
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_PRESS_MSB,
-			       &tmp, 3);
+			       data->buf, BME680_PRESS_NUM_BYTES);
 	if (ret < 0) {
 		dev_err(dev, "failed to read pressure\n");
 		return ret;
 	}
 
-	adc_press = be32_to_cpu(tmp) >> 12;
+	adc_press = FIELD_GET(BME680_MEAS_TRIM_MASK,
+			      get_unaligned_be24(data->buf));
 	if (adc_press == BME680_MEAS_SKIPPED) {
 		/* reading was skipped */
 		dev_err(dev, "reading pressure skipped\n");
@@ -638,7 +640,6 @@ static int bme680_read_humid(struct bme680_data *data,
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
-	__be16 tmp = 0;
 	u16 adc_humidity;
 	u32 comp_humidity;
 
@@ -648,13 +649,13 @@ static int bme680_read_humid(struct bme680_data *data,
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_HUMIDITY_MSB,
-			       &tmp, sizeof(tmp));
+			       &data->be16, BME680_HUMID_NUM_BYTES);
 	if (ret < 0) {
 		dev_err(dev, "failed to read humidity\n");
 		return ret;
 	}
 
-	adc_humidity = be16_to_cpu(tmp);
+	adc_humidity = be16_to_cpu(data->be16);
 	if (adc_humidity == BME680_MEAS_SKIPPED) {
 		/* reading was skipped */
 		dev_err(dev, "reading humidity skipped\n");
@@ -672,8 +673,6 @@ static int bme680_read_gas(struct bme680_data *data,
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
-	__be16 tmp = 0;
-	unsigned int check;
 	u16 adc_gas_res, gas_regs_val;
 	u8 gas_range;
 
@@ -693,19 +692,20 @@ static int bme680_read_gas(struct bme680_data *data,
 	if (ret)
 		return ret;
 
-	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check);
-	if (check & BME680_GAS_MEAS_BIT) {
+	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &data->check);
+	if (data->check & BME680_GAS_MEAS_BIT) {
 		dev_err(dev, "gas measurement incomplete\n");
 		return -EBUSY;
 	}
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_GAS_MSB,
-			       &tmp, sizeof(tmp));
+			       &data->be16, BME680_GAS_NUM_BYTES);
 	if (ret < 0) {
 		dev_err(dev, "failed to read gas resistance\n");
 		return ret;
 	}
-	gas_regs_val = be16_to_cpu(tmp);
+
+	gas_regs_val = be16_to_cpu(data->be16);
 	adc_gas_res = FIELD_GET(BME680_ADC_GAS_RES, gas_regs_val);
 
 	/*
@@ -834,7 +834,6 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
 {
 	struct iio_dev *indio_dev;
 	struct bme680_data *data;
-	unsigned int val;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
@@ -865,15 +864,15 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
 		return ret;
 	}
 
-	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
+	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &data->check);
 	if (ret < 0) {
 		dev_err(dev, "Error reading chip ID\n");
 		return ret;
 	}
 
-	if (val != BME680_CHIP_ID_VAL) {
+	if (data->check != BME680_CHIP_ID_VAL) {
 		dev_err(dev, "Wrong chip ID, got %x expected %x\n",
-			val, BME680_CHIP_ID_VAL);
+			data->check, BME680_CHIP_ID_VAL);
 		return -ENODEV;
 	}