[PATCH] I2O: Lindent run and replacement of printk through osm printing functions

Lindent run and replaced printk() through the corresponding osm_*() function
Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/message/i2o/Kconfig

@@ -44,8 +44,8 @@ config I2O_EXT_ADAPTEC_DMA64
 
 config I2O_CONFIG
 	tristate "I2O Configuration support"
-	depends on PCI && I2O
-	help
+	depends on I2O
+	---help---
 	  Say Y for support of the configuration interface for the I2O adapters.
 	  If you have a RAID controller from Adaptec and you want to use the
 	  raidutils to manage your RAID array, you have to say Y here.
@@ -74,7 +74,7 @@ config I2O_BUS
 config I2O_BLOCK
 	tristate "I2O Block OSM"
 	depends on I2O
-	help
+	---help---
 	  Include support for the I2O Block OSM. The Block OSM presents disk
 	  and other structured block devices to the operating system. If you
 	  are using an RAID controller, you could access the array only by
@@ -87,7 +87,7 @@ config I2O_BLOCK
 config I2O_SCSI
 	tristate "I2O SCSI OSM"
 	depends on I2O && SCSI
-	help
+	---help---
 	  Allows direct SCSI access to SCSI devices on a SCSI or FibreChannel
 	  I2O controller. You can use both the SCSI and Block OSM together if
 	  you wish. To access a RAID array, you must use the Block OSM driver.
@@ -99,7 +99,7 @@ config I2O_SCSI
 config I2O_PROC
 	tristate "I2O /proc support"
 	depends on I2O
-	help
+	---help---
 	  If you say Y here and to "/proc file system support", you will be
 	  able to read I2O related information from the virtual directory
 	  /proc/i2o.

drivers/message/i2o/device.c

@@ -443,7 +443,6 @@ static struct class_interface i2o_device_class_interface = {
  *	Note that the minimum sized reslist is 8 bytes and contains
  *	ResultCount, ErrorInfoSize, BlockStatus and BlockSize.
  */
-
 static int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist,
 			  int oplen, void *reslist, int reslen)
 {

drivers/message/i2o/driver.c

@@ -117,10 +117,9 @@ int i2o_driver_register(struct i2o_driver *drv)
 
 		i2o_driver_notify_controller_add(drv, c);
 		list_for_each_entry(i2o_dev, &c->devices, list)
-			i2o_driver_notify_device_add(drv, i2o_dev);
+		    i2o_driver_notify_device_add(drv, i2o_dev);
 	}
 
-
 	rc = driver_register(&drv->driver);
 	if (rc)
 		destroy_workqueue(drv->event_queue);

drivers/message/i2o/exec-osm.c

@@ -152,7 +152,7 @@ int i2o_msg_post_wait_mem(struct i2o_controller *c, u32 m, unsigned long
 		list_add(&wait->list, &i2o_exec_wait_list);
 
 		wait_event_interruptible_timeout(wq, wait->complete,
-			timeout * HZ);
+						 timeout * HZ);
 
 		wait->wq = NULL;
 	}

drivers/message/i2o/i2o_block.c

@@ -940,7 +940,6 @@ static void i2o_block_request_fn(struct request_queue *q)
 			INIT_WORK(&dreq->work, i2o_block_delayed_request_fn,
 				  dreq);
 
-			osm_info("transfer error\n");
 			if (!queue_delayed_work(i2o_block_driver.event_queue,
 						&dreq->work,
 						I2O_BLOCK_RETRY_TIME))
@@ -1042,8 +1041,8 @@ static struct i2o_block_device *i2o_block_device_alloc(void)
 static int i2o_block_probe(struct device *dev)
 {
 	struct i2o_device *i2o_dev = to_i2o_device(dev);
-	struct i2o_block_device *i2o_blk_dev;
 	struct i2o_controller *c = i2o_dev->iop;
+	struct i2o_block_device *i2o_blk_dev;
 	struct gendisk *gd;
 	struct request_queue *queue;
 	static int unit = 0;

drivers/message/i2o/i2o_block.h

@@ -64,40 +64,38 @@
 
 /* I2O Block OSM mempool struct */
 struct i2o_block_mempool {
-	kmem_cache_t	*slab;
-	mempool_t	*pool;
+	kmem_cache_t *slab;
+	mempool_t *pool;
 };
 
 /* I2O Block device descriptor */
 struct i2o_block_device {
 	struct i2o_device *i2o_dev;	/* pointer to I2O device */
 	struct gendisk *gd;
-	spinlock_t lock;		/* queue lock */
+	spinlock_t lock;	/* queue lock */
 	struct list_head open_queue;	/* list of transfered, but unfinished
 					   requests */
 	unsigned int open_queue_depth;	/* number of requests in the queue */
 
-	int rcache;			/* read cache flags */
-	int wcache;			/* write cache flags */
+	int rcache;		/* read cache flags */
+	int wcache;		/* write cache flags */
 	int flags;
-	u16 power;			/* power state */
-	int media_change_flag;		/* media changed flag */
+	u16 power;		/* power state */
+	int media_change_flag;	/* media changed flag */
 };
 
 /* I2O Block device request */
-struct i2o_block_request
-{
+struct i2o_block_request {
 	struct list_head queue;
-	struct request *req;		/* corresponding request */
+	struct request *req;	/* corresponding request */
 	struct i2o_block_device *i2o_blk_dev;	/* I2O block device */
-	struct device *dev;		/* device used for DMA */
-	int sg_nents;			/* number of SG elements */
-	struct scatterlist sg_table[I2O_MAX_PHYS_SEGMENTS]; /* SG table */
+	struct device *dev;	/* device used for DMA */
+	int sg_nents;		/* number of SG elements */
+	struct scatterlist sg_table[I2O_MAX_PHYS_SEGMENTS];	/* SG table */
 };
 
 /* I2O Block device delayed request */
-struct i2o_block_delayed_request
-{
+struct i2o_block_delayed_request {
 	struct work_struct work;
 	struct request_queue *queue;
 };

drivers/message/i2o/i2o_config.c

@@ -368,9 +368,9 @@ static int i2o_cfg_swul(unsigned long arg)
 
 	i2o_dma_free(&c->pdev->dev, &buffer);
 
-return_ret:
+      return_ret:
 	return ret;
-return_fault:
+      return_fault:
 	ret = -EFAULT;
 	goto return_ret;
 };
@@ -519,7 +519,8 @@ static int i2o_cfg_evt_get(unsigned long arg, struct file *fp)
 
 #ifdef CONFIG_I2O_EXT_ADAPTEC
 #ifdef CONFIG_COMPAT
-static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long arg)
+static int i2o_cfg_passthru32(struct file *file, unsigned cmnd,
+			      unsigned long arg)
 {
 	struct i2o_cmd_passthru32 __user *cmd;
 	struct i2o_controller *c;
@@ -646,8 +647,9 @@ static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long ar
 			    flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR */ ) {
 				// TODO 64bit fix
 				if (copy_from_user
-				    (p->virt, (void __user *)(unsigned long)sg[i].addr_bus,
-				     sg_size)) {
+				    (p->virt,
+				     (void __user *)(unsigned long)sg[i].
+				     addr_bus, sg_size)) {
 					printk(KERN_DEBUG
 					       "%s: Could not copy SG buf %d FROM user\n",
 					       c->name, i);
@@ -738,11 +740,12 @@ static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long ar
 	return rcode;
 }
 
-static long i2o_cfg_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg)
+static long i2o_cfg_compat_ioctl(struct file *file, unsigned cmd,
+				 unsigned long arg)
 {
 	int ret;
-	lock_kernel();		
-	switch (cmd) { 
+	lock_kernel();
+	switch (cmd) {
 	case I2OGETIOPS:
 		ret = i2o_cfg_ioctl(NULL, file, cmd, arg);
 		break;
@@ -1136,6 +1139,7 @@ static int __init i2o_config_old_init(void)
 		osm_err("can't register device.\n");
 		return -EBUSY;
 	}
+
 	return 0;
 }
 

drivers/message/i2o/i2o_proc.c

@@ -28,7 +28,7 @@
  */
 
 #define OSM_NAME	"proc-osm"
-#define OSM_VERSION	"$Rev$"
+#define OSM_VERSION	"1.145"
 #define OSM_DESCRIPTION	"I2O ProcFS OSM"
 
 #define I2O_MAX_MODULES 4

drivers/message/i2o/pci.c

@@ -179,7 +179,10 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
 		return -ENOMEM;
 	}
 
-	if (i2o_dma_alloc(dev, &c->out_queue, MSG_POOL_SIZE, GFP_KERNEL)) {
+	if (i2o_dma_alloc
+	    (dev, &c->out_queue,
+	     I2O_MAX_OUTBOUND_MSG_FRAMES * I2O_OUTBOUND_MSG_FRAME_SIZE *
+	     sizeof(u32), GFP_KERNEL)) {
 		i2o_pci_free(c);
 		return -ENOMEM;
 	}

include/linux/i2o.h

@@ -156,8 +156,8 @@ struct i2o_controller {
 
 	struct pci_dev *pdev;	/* PCI device */
 
-	unsigned int promise:1;		/* Promise controller */
-	unsigned int adaptec:1;		/* DPT / Adaptec controller */
+	unsigned int promise:1;	/* Promise controller */
+	unsigned int adaptec:1;	/* DPT / Adaptec controller */
 	unsigned int raptor:1;	/* split bar */
 	unsigned int no_quiesce:1;	/* dont quiesce before reset */
 	unsigned int short_req:1;	/* use small block sizes */
@@ -174,7 +174,7 @@ struct i2o_controller {
 
 	/* Dynamic LCT related data */
 
-	struct i2o_dma status;	/* status of IOP */
+	struct i2o_dma status;	/* IOP status block */
 
 	struct i2o_dma hrt;	/* HW Resource Table */
 	i2o_lct *lct;		/* Logical Config Table */
@@ -186,7 +186,7 @@ struct i2o_controller {
 	struct i2o_io in_queue;	/* inbound message queue Host->IOP */
 	struct i2o_dma out_queue;	/* outbound message queue IOP->Host */
 
-	unsigned int battery:1;		/* Has a battery backup */
+	unsigned int battery:1;	/* Has a battery backup */
 	unsigned int io_alloc:1;	/* An I/O resource was allocated */
 	unsigned int mem_alloc:1;	/* A memory resource was allocated */