Skip to content

L
linux
Commit f340a59f authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'imx-fixes-3.16' of... 

Merge tag 'imx-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

Pull "i.MX fixes for 3.16" from Shawn Guo:

 - Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51,
   because controller base CD/WP is not working in esdhc driver due to
   runtime PM support
 - A couple of random ventana gw5xxx board fixes
 - Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving
   IPUv3 driver out of staging tree
 - Fix enet/fec clock selection on imx6sl
 - Fix display node on imx53-m53evk board
 - A couple of Cubox-i updates from Russell, which were omitted from
   the merge window due to dependency

* tag 'imx-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc.
  ARM: dts: imx51-babbage: Fix esdhc setup
  ARM: dts: mx5: Move the display out of soc {} node
  ARM: dts: mx5: Fix IPU port node placement
  ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE
  ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level
  ARM: dts: cubox-i: add support for PWM-driven front panel LED
  ARM: dts: imx6: ventana: correct gw52xx sgtl5000 clock source
  ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix
  ARM: dts: imx6: ventana: fix include typo
  ARM: dts: imx6sl: correct the fec ipg clock source
  ARM: imx6sl: add missing enet clock for imx6sl
parents 9cbf3d2b 7d278f27
Hide whitespace changes
Inline Side-by-side
Showing with 73 additions and 48 deletions
arch/arm/boot/dts/imx51-babbage.dts
View file @ f340a59f
......@@ -315,15 +315,15 @@ partition@40000 {
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
fsl,cd-controller;
fsl,wp-controller;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......@@ -468,8 +468,8 @@ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
MX51_PAD_GPIO1_1__SD1_WP 0x20d5
MX51_PAD_GPIO1_0__GPIO1_0 0x100
MX51_PAD_GPIO1_1__GPIO1_1 0x100
>;
};
......
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
View file @ f340a59f
......@@ -107,7 +107,7 @@ &audmux {
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
fsl,cd-controller;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
status = "okay";
};
......@@ -206,7 +206,7 @@ MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
pinctrl_esdhc1_cd: esdhc1_cd {
fsl,pins = <
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
MX51_PAD_GPIO1_0__GPIO1_0 0xd5
>;
};
......
arch/arm/boot/dts/imx53-m53evk.dts
View file @ f340a59f
......@@ -21,27 +21,25 @@ memory {
<0xb0000000 0x20000000>;
};
soc {
display1: display@di1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
800x480p60 {
native-mode;
clock-frequency = <31500000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
hback-porch = <88>;
hsync-len = <128>;
vback-porch = <33>;
vfront-porch = <9>;
vsync-len = <3>;
vsync-active = <1>;
};
display1: display@di1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
800x480p60 {
native-mode;
clock-frequency = <31500000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
hback-porch = <88>;
hsync-len = <128>;
vback-porch = <33>;
vfront-porch = <9>;
vsync-len = <3>;
vsync-active = <1>;
};
};
......
arch/arm/boot/dts/imx6dl-hummingboard.dts
View file @ f340a59f
......@@ -143,6 +143,14 @@ pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
};
pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
/*
* Similar to pinctrl_usbotg_2, but we want it
* pulled down for a fixed host connection.
*/
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
};
pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
};
......@@ -178,6 +186,8 @@ &usbh1 {
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};
......
arch/arm/boot/dts/imx6q-gw51xx.dts
View file @ f340a59f
......@@ -11,7 +11,7 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-gw54xx.dtsi"
#include "imx6qdl-gw51xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 Quad GW51XX";
......
arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
View file @ f340a59f
......@@ -12,6 +12,19 @@ ir_recv: ir-receiver {
pinctrl-0 = <&pinctrl_cubox_i_ir>;
};
pwmleds {
compatible = "pwm-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
front {
active-low;
label = "imx6:red:front";
max-brightness = <248>;
pwms = <&pwm1 0 50000>;
};
};
regulators {
compatible = "simple-bus";
......@@ -109,6 +122,10 @@ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
>;
};
pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
};
pinctrl_cubox_i_spdif: cubox-i-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
......@@ -117,6 +134,14 @@ pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
};
pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
/*
* The Cubox-i pulls this low, but as it's pointless
* leaving it as a pull-up, even if it is just 10uA.
*/
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
};
pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
};
......@@ -153,6 +178,8 @@ &usbh1 {
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};
......
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
View file @ f340a59f
......@@ -161,7 +161,7 @@ &i2c2 {
status = "okay";
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {
......
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
View file @ f340a59f
......@@ -220,7 +220,7 @@ pciswitch: pex8609@3f {
};
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {
......@@ -288,7 +288,7 @@ accelerometer: fxos8700@1e {
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
clocks = <&clks 201>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;
};
......
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
View file @ f340a59f
......@@ -234,7 +234,7 @@ pciswitch: pex8606@3f {
};
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {
......
arch/arm/boot/dts/imx6qdl-microsom.dtsi
View file @ f340a59f
......@@ -10,14 +10,6 @@ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_microsom_usbotg: microsom-usbotg {
/*
* Similar to pinctrl_usbotg_2, but we want it
* pulled down for a fixed host connection.
*/
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
};
};
};
......@@ -26,8 +18,3 @@ &uart1 {
pinctrl-0 = <&pinctrl_microsom_uart1>;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_microsom_usbotg>;
};
arch/arm/boot/dts/imx6sl.dtsi
View file @ f340a59f
......@@ -686,7 +686,7 @@ fec: ethernet@02188000 {
compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ENET_REF>,
clocks = <&clks IMX6SL_CLK_ENET>,
<&clks IMX6SL_CLK_ENET_REF>;
clock-names = "ipg", "ahb";
status = "disabled";
......
arch/arm/configs/imx_v6_v7_defconfig
View file @ f340a59f
......@@ -186,6 +186,7 @@ CONFIG_VIDEO_MX3=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
......
arch/arm/mach-imx/clk-imx6sl.c
View file @ f340a59f
......@@ -312,6 +312,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
clks[IMX6SL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12);
clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14);
clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16);
......
include/dt-bindings/clock/imx6sl-clock.h
View file @ f340a59f
......@@ -145,6 +145,7 @@
#define IMX6SL_CLK_USDHC4 132
#define IMX6SL_CLK_PLL4_AUDIO_DIV 133
#define IMX6SL_CLK_SPBA 134
#define IMX6SL_CLK_END 135
#define IMX6SL_CLK_ENET 135
#define IMX6SL_CLK_END 136
#endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7