Commit f346b16f authored by Lorenzo Bianconi's avatar Lorenzo Bianconi Committed by Jonathan Cameron

iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator

Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power
lines. Introduce voltage regulators to control them.
Signed-off-by: default avatarLorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/a0427a66360bdec73c3b1fb536a46240f96b2ae7.1605631305.git.lorenzo@kernel.orgSigned-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 99ff938f
......@@ -13,6 +13,7 @@
#include <linux/device.h>
#include <linux/iio/iio.h>
#include <linux/regulator/consumer.h>
#define ST_LSM6DS3_DEV_NAME "lsm6ds3"
#define ST_LSM6DS3H_DEV_NAME "lsm6ds3h"
......@@ -368,6 +369,7 @@ struct st_lsm6dsx_sensor {
* struct st_lsm6dsx_hw - ST IMU MEMS hw instance
* @dev: Pointer to instance of struct device (I2C or SPI).
* @regmap: Register map of the device.
* @regulators: VDD/VDDIO voltage regulators.
* @irq: Device interrupt line (I2C or SPI).
* @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
* @conf_lock: Mutex to prevent concurrent FIFO configuration update.
......@@ -390,6 +392,7 @@ struct st_lsm6dsx_sensor {
struct st_lsm6dsx_hw {
struct device *dev;
struct regmap *regmap;
struct regulator_bulk_data regulators[2];
int irq;
struct mutex fifo_lock;
......
......@@ -2533,6 +2533,38 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
return 0;
}
static int st_lsm6dsx_init_regulators(struct device *dev)
{
struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
int err;
/* vdd-vddio power regulators */
hw->regulators[0].supply = "vdd";
hw->regulators[1].supply = "vddio";
err = devm_regulator_bulk_get(dev, ARRAY_SIZE(hw->regulators),
hw->regulators);
if (err)
return dev_err_probe(dev, err, "failed to get regulators\n");
err = regulator_bulk_enable(ARRAY_SIZE(hw->regulators),
hw->regulators);
if (err) {
dev_err(dev, "failed to enable regulators: %d\n", err);
return err;
}
msleep(50);
return 0;
}
static void st_lsm6dsx_chip_uninit(void *data)
{
struct st_lsm6dsx_hw *hw = data;
regulator_bulk_disable(ARRAY_SIZE(hw->regulators), hw->regulators);
}
int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
struct regmap *regmap)
{
......@@ -2552,6 +2584,14 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
mutex_init(&hw->conf_lock);
mutex_init(&hw->page_lock);
err = st_lsm6dsx_init_regulators(dev);
if (err)
return err;
err = devm_add_action_or_reset(dev, st_lsm6dsx_chip_uninit, hw);
if (err)
return err;
hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL);
if (!hw->buff)
return -ENOMEM;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment