Commit f356d7a7 authored by Guenter Roeck's avatar Guenter Roeck Committed by Greg Kroah-Hartman

serial: etraxfs-uart: Fix crash

Since commit 7d8c70d8 ("serial: mctrl-gpio: rename init function"),
crisv32 either do not build or crash as follows.

Unable to handle kernel NULL pointer dereference
Linux 4.3.0-rc7-next-20151101 #1 Sun Nov 1 11:41:28 PST 2015
...
Call Trace: [<c0004a0e>] show_stack+0x0/0x9e
[<c004c0c0>] printk+0x0/0x2c
[<c00059d4>] show_registers+0x14a/0x1c2
[<c004c0c0>] printk+0x0/0x2c
[<c0004b52>] die_if_kernel+0x7c/0x9e
[<c0005346>] do_page_fault+0x32e/0x3e6
[<c01dc59c>] of_get_property+0x0/0x2c
[<c01e0558>] of_irq_parse_raw+0x12a/0x376
[<c01dc59c>] of_get_property+0x0/0x2c
[<c0053aca>] get_page_from_freelist+0x73e/0x856
[<c01dc59c>] of_get_property+0x0/0x2c
[<c0008912>] d_mmu_refill+0x10a/0x112
[<c01b488c>] devm_kmalloc+0x40/0x56
[<c01b47d0>] add_dr+0xc/0x1c
[<c01b4800>] devm_add_action+0x2/0x4e
[<c01abdbc>] mctrl_gpio_init_noauto+0x1c/0x76
[<c01abf9e>] mctrl_gpio_init+0x22/0x110

The function call in the etraxfs-uart driver was not renamed,
possibly due to interference with commit 7b9c5162 ("serial:
etraxfs-uart: use mctrl_gpio helpers for handling modem signals").

Fixes: 7d8c70d8 ("serial: mctrl-gpio: rename init function")
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Acked-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: default avatarNiklas Cassel <nks@flawful.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent bec8bf61
...@@ -894,7 +894,7 @@ static int etraxfs_uart_probe(struct platform_device *pdev) ...@@ -894,7 +894,7 @@ static int etraxfs_uart_probe(struct platform_device *pdev)
up->regi_ser = of_iomap(np, 0); up->regi_ser = of_iomap(np, 0);
up->port.dev = &pdev->dev; up->port.dev = &pdev->dev;
up->gpios = mctrl_gpio_init(&pdev->dev, 0); up->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0);
if (IS_ERR(up->gpios)) if (IS_ERR(up->gpios))
return PTR_ERR(up->gpios); return PTR_ERR(up->gpios);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment