Commit f37216de authored by Daniel Mack's avatar Daniel Mack Committed by Ulf Hansson

mmc: pxamci: remove pxa-mmc, gpio-power from devicetree bindings

Devicetree-enabled boards should use proper regulators to control the
power of cards, not GPIOs, so let's remove this property. The regulator
properties are supported by the MMC core and are described in the
generic MMC document:

  Documentation/devicetree/bindings/mmc/mmc.txt

Note that devicetree support for PXA platforms hasn't fully landed yet,
so this binding does not have any users at this point.
Signed-off-by: default avatarDaniel Mack <daniel@zonque.org>
Acked-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent fa3a5115
......@@ -8,7 +8,6 @@ Required properties:
Optional properties:
- marvell,detect-delay-ms: sets the detection delay timeout in ms.
- marvell,gpio-power: GPIO spec for the card power enable pin
In addition to the properties described in this docuent, the details
described in mmc.txt are supported.
......@@ -19,6 +18,7 @@ mmc0: mmc@41100000 {
compatible = "marvell,pxa-mmc";
reg = <0x41100000 0x1000>;
interrupts = <23>;
vmmc-supply = <&mmc_regulator>;
cd-gpios = <&gpio 23 0>;
wp-gpios = <&gpio 24 0>;
};
......
......@@ -607,9 +607,6 @@ static int pxamci_of_init(struct platform_device *pdev,
return -ENOMEM;
/* pxa-mmc specific */
pdata->gpio_power =
of_get_named_gpio(np, "pxa-mmc,gpio-power", 0);
if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0)
pdata->detect_delay_ms = tmp;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment