Commit f3779cb1 authored by Thierry Reding's avatar Thierry Reding

drm/tegra: vic: Support stream ID register programming

The version of VIC found in Tegra186 and later incorporates improvements
with regards to context isolation. As part of those improvements, stream
ID registers were added that allow to specify separate stream IDs for
the Falcon microcontroller and the VIC memory interface.

While it is possible to also set the stream ID dynamically at runtime to
allow userspace contexts to be completely separated, this commit doesn't
implement that yet. Instead, the static VIC stream ID is programmed when
the Falcon is booted. This ensures that memory accesses by the Falcon or
the VIC are properly translated via the SMMU.
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 3ff41673
......@@ -26,6 +26,7 @@
struct vic_config {
const char *firmware;
unsigned int version;
bool supports_sid;
};
struct vic {
......@@ -105,6 +106,22 @@ static int vic_boot(struct vic *vic)
if (vic->booted)
return 0;
if (vic->config->supports_sid) {
struct iommu_fwspec *spec = dev_iommu_fwspec_get(vic->dev);
u32 value;
value = TRANSCFG_ATT(1, TRANSCFG_SID_FALCON) |
TRANSCFG_ATT(0, TRANSCFG_SID_HW);
vic_writel(vic, value, VIC_TFBIF_TRANSCFG);
if (spec && spec->num_ids > 0) {
value = spec->ids[0] & 0xffff;
vic_writel(vic, value, VIC_THI_STREAMID0);
vic_writel(vic, value, VIC_THI_STREAMID1);
}
}
/* setup clockgating registers */
vic_writel(vic, CG_IDLE_CG_DLY_CNT(4) |
CG_IDLE_CG_EN |
......@@ -314,6 +331,7 @@ static const struct tegra_drm_client_ops vic_ops = {
static const struct vic_config vic_t124_config = {
.firmware = NVIDIA_TEGRA_124_VIC_FIRMWARE,
.version = 0x40,
.supports_sid = false,
};
#define NVIDIA_TEGRA_210_VIC_FIRMWARE "nvidia/tegra210/vic04_ucode.bin"
......@@ -321,6 +339,7 @@ static const struct vic_config vic_t124_config = {
static const struct vic_config vic_t210_config = {
.firmware = NVIDIA_TEGRA_210_VIC_FIRMWARE,
.version = 0x21,
.supports_sid = false,
};
#define NVIDIA_TEGRA_186_VIC_FIRMWARE "nvidia/tegra186/vic04_ucode.bin"
......@@ -328,6 +347,7 @@ static const struct vic_config vic_t210_config = {
static const struct vic_config vic_t186_config = {
.firmware = NVIDIA_TEGRA_186_VIC_FIRMWARE,
.version = 0x18,
.supports_sid = true,
};
#define NVIDIA_TEGRA_194_VIC_FIRMWARE "nvidia/tegra194/vic.bin"
......@@ -335,6 +355,7 @@ static const struct vic_config vic_t186_config = {
static const struct vic_config vic_t194_config = {
.firmware = NVIDIA_TEGRA_194_VIC_FIRMWARE,
.version = 0x19,
.supports_sid = true,
};
static const struct of_device_id vic_match[] = {
......
......@@ -17,11 +17,20 @@
/* VIC registers */
#define VIC_THI_STREAMID0 0x00000030
#define VIC_THI_STREAMID1 0x00000034
#define NV_PVIC_MISC_PRI_VIC_CG 0x000016d0
#define CG_IDLE_CG_DLY_CNT(val) ((val & 0x3f) << 0)
#define CG_IDLE_CG_EN (1 << 6)
#define CG_WAKEUP_DLY_CNT(val) ((val & 0xf) << 16)
#define VIC_TFBIF_TRANSCFG 0x00002044
#define TRANSCFG_ATT(i, v) (((v) & 0x3) << (i * 4))
#define TRANSCFG_SID_HW 0
#define TRANSCFG_SID_PHY 1
#define TRANSCFG_SID_FALCON 2
/* Firmware offsets */
#define VIC_UCODE_FCE_HEADER_OFFSET (6*4)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment