Commit f37a7238 authored by Adrian Bunk's avatar Adrian Bunk Committed by James Bottomley

[SCSI] 53c7xx: fix removal fallout

This patch does some additional cleanups after the 53c7xx removal.
Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
Acked-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent f10ab66f
......@@ -46,8 +46,6 @@
.mailmap
.mm
53c700_d.h
53c7xx_d.h
53c7xx_u.h
53c8xx_d.h*
BitKeeper
COPYING
......
......@@ -867,66 +867,6 @@ controller and should be autodetected by the driver. An example is the
24 bit region which is specified by a mask of 0x00fffffe.
5.5) 53c7xx=
------------
Syntax: 53c7xx=<sub-options...>
These options affect the A4000T, A4091, WarpEngine, Blizzard 603e+,
and GForce 040/060 SCSI controllers on the Amiga, as well as the
builtin MVME 16x SCSI controller.
The <sub-options> is a comma-separated list of the sub-options listed
below.
5.5.1) nosync
-------------
Syntax: nosync:0
Disables sync negotiation for all devices. Any value after the
colon is acceptable (and has the same effect).
5.5.2) noasync
--------------
[OBSOLETE, REMOVED]
5.5.3) nodisconnect
-------------------
Syntax: nodisconnect:0
Disables SCSI disconnects. Any value after the colon is acceptable
(and has the same effect).
5.5.4) validids
---------------
Syntax: validids:0xNN
Specify which SCSI ids the driver should pay attention to. This is
a bitmask (i.e. to only pay attention to ID#4, you'd use 0x10).
Default is 0x7f (devices 0-6).
5.5.5) opthi
5.5.6) optlo
------------
Syntax: opthi:M,optlo:N
Specify options for "hostdata->options". The acceptable definitions
are listed in drivers/scsi/53c7xx.h; the 32 high bits should be in
opthi and the 32 low bits in optlo. They must be specified in the
order opthi=M,optlo=N.
5.5.7) next
-----------
No argument. Used to separate blocks of keywords when there's more
than one 53c7xx host adapter in the system.
/* Local Variables: */
/* mode: text */
/* End: */
......@@ -64,8 +64,6 @@ lpfc.txt
- LPFC driver release notes
megaraid.txt
- Common Management Module, shared code handling ioctls for LSI drivers
ncr53c7xx.txt
- info on driver for NCR53c7xx based adapters
ncr53c8xx.txt
- info on driver for NCR53c8xx based adapters
osst.txt
......
README for WarpEngine/A4000T/A4091 SCSI kernels.
Use the following options to disable options in the SCSI driver.
Using amiboot for example.....
To disable Synchronous Negotiation....
amiboot -k kernel 53c7xx=nosync:0
To disable Disconnection....
amiboot -k kernel 53c7xx=nodisconnect:0
To disable certain SCSI devices...
amiboot -k kernel 53c7xx=validids:0x3F
this allows only device ID's 0,1,2,3,4 and 5 for linux to handle.
(this is a bitmasked field - i.e. each bit represents a SCSI ID)
These commands work on a per controller basis and use the option 'next' to
move to the next controller in the system.
e.g.
amiboot -k kernel 53c7xx=nodisconnect:0,next,nosync:0
this uses No Disconnection on the first controller and Asynchronous
SCSI on the second controller.
Known Issues:
Two devices are known not to function with the default settings of using
synchronous SCSI. These are the Archive Viper 150 Tape Drive and the
SyQuest SQ555 removeable hard drive. When using these devices on a controller
use the 'nosync:0' option.
Please try these options and post any problems/successes to me.
Alan Hourihane <alanh@fairlite.demon.co.uk>
53c700_d.h
53c7xx_d.h
53c7xx_u.h
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment