Commit f3ce5ab4 authored by Pali Rohár's avatar Pali Rohár Committed by Ben Hutchings

hwmon: (dell-smm) Restrict fan control and serial number to CAP_SYS_ADMIN by default

commit 7613663c upstream.

For security reasons ordinary user must not be able to control fan speed
via /proc/i8k by default. Some malicious software running under "nobody"
user could be able to turn fan off and cause HW problems. So this patch
changes default value of "restricted" parameter to 1.

Also restrict reading of DMI_PRODUCT_SERIAL from /proc/i8k via "restricted"
parameter. It is because non root user cannot read DMI_PRODUCT_SERIAL from
sysfs file /sys/class/dmi/id/product_serial.

Old non secure behaviour of file /proc/i8k can be achieved by loading this
module with "restricted" parameter set to 0.

Note that this patch has effects only for kernels compiled with CONFIG_I8K
and only for file /proc/i8k. Hwmon interface provided by this driver was
not changed and root access for setting fan speed was needed also before.
Reported-by: default avatarMario Limonciello <Mario_Limonciello@dell.com>
Signed-off-by: default avatarPali Rohár <pali.rohar@gmail.com>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
[bwh: Backported to 3.16: adjust filename, context]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
parent 2c29e73a
......@@ -62,6 +62,7 @@
static DEFINE_MUTEX(i8k_mutex);
static char bios_version[4];
static char bios_machineid[16];
static struct device *i8k_hwmon_dev;
static u32 i8k_hwmon_flags;
static int i8k_fan_mult;
......@@ -85,13 +86,13 @@ static bool ignore_dmi;
module_param(ignore_dmi, bool, 0);
MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match");
static bool restricted;
static bool restricted = true;
module_param(restricted, bool, 0);
MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
MODULE_PARM_DESC(restricted, "Restrict fan control and serial number to CAP_SYS_ADMIN (default: 1)");
static bool power_status;
module_param(power_status, bool, 0600);
MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k (default: 0)");
static int fan_mult = I8K_FAN_MULT;
module_param(fan_mult, int, 0);
......@@ -350,9 +351,11 @@ i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg)
break;
case I8K_MACHINE_ID:
memset(buff, 0, 16);
strlcpy(buff, i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
sizeof(buff));
if (restricted && !capable(CAP_SYS_ADMIN))
return -EPERM;
memset(buff, 0, sizeof(buff));
strlcpy(buff, bios_machineid, sizeof(buff));
break;
case I8K_FN_STATUS:
......@@ -469,7 +472,7 @@ static int i8k_proc_show(struct seq_file *seq, void *offset)
return seq_printf(seq, "%s %s %s %d %d %d %d %d %d %d\n",
I8K_PROC_FMT,
bios_version,
i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
(restricted && !capable(CAP_SYS_ADMIN)) ? "-1" : bios_machineid,
cpu_temp,
left_fan, right_fan, left_speed, right_speed,
ac_power, fn_key);
......@@ -765,6 +768,8 @@ static int __init i8k_probe(void)
strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION),
sizeof(bios_version));
strlcpy(bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
sizeof(bios_machineid));
/*
* Get SMM Dell signature
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment