arm64: dts: qcom: replace deprecated perst-gpio with perst-gpios

Replace deprecated perst-gpio and wake-gpio properties with up-to-date
perst-gpios and wake-gpios in the Qualcomm device trees.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220506152107.1527552-9-dmitry.baryshkov@linaro.org

arch/arm64/boot/dts/qcom/apq8096-db820c.dts

@@ -502,20 +502,20 @@ config {
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 	vddpe-3v3-supply = <&wlan_en>;
 	vdda-supply = <&vreg_l28a_0p925>;
 };
 
 &pcie1 {
 	status = "okay";
-	perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
 	vdda-supply = <&vreg_l28a_0p925>;
 };
 
 &pcie2 {
 	status = "okay";
-	perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
 	vdda-supply = <&vreg_l28a_0p925>;
 };
 

arch/arm64/boot/dts/qcom/ipq8074-hk01.dts

@@ -51,12 +51,12 @@ &blsp1_uart5 {
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 61 0x1>;
+	perst-gpios = <&tlmm 61 0x1>;
 };
 
 &pcie1 {
 	status = "okay";
-	perst-gpio = <&tlmm 58 0x1>;
+	perst-gpios = <&tlmm 58 0x1>;
 };
 
 &pcie_phy0 {

arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi

@@ -39,12 +39,12 @@ &blsp1_uart5 {
 
 &pcie0 {
 	status = "ok";
-	perst-gpio = <&tlmm 58 0x1>;
+	perst-gpios = <&tlmm 58 0x1>;
 };
 
 &pcie1 {
 	status = "ok";
-	perst-gpio = <&tlmm 61 0x1>;
+	perst-gpios = <&tlmm 61 0x1>;
 };
 
 &pcie_phy0 {

arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi

@@ -196,8 +196,8 @@ &mmcc {
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 	vddpe-3v3-supply = <&wlan_en>;
 	vdda-supply = <&pm8994_l28>;
 };

arch/arm64/boot/dts/qcom/qcs404-evb.dtsi

@@ -99,7 +99,7 @@ pms405_s3: s3 {
 &pcie {
 	status = "okay";
 
-	perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&perst_state>;

arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi

@@ -446,7 +446,7 @@ &pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>;
 
-	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 	vddpe-3v3-supply = <&pp3300_ssd>;
 };
 

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi

@@ -248,7 +248,7 @@ &ipa {
 
 &pcie1 {
 	status = "okay";
-	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 
 	vddpe-3v3-supply = <&nvme_3v3_regulator>;
 

arch/arm64/boot/dts/qcom/sdm845-db845c.dts

@@ -522,7 +522,7 @@ &mss_pil {
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
 
 	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
@@ -540,7 +540,7 @@ &pcie0_phy {
 
 &pcie1 {
 	status = "okay";
-	perst-gpio = <&tlmm 102 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_default_state>;