Commit f408170d authored by Cao Van Dong's avatar Cao Van Dong Committed by Simon Horman

ARM: dts: r8a77470: Add HSCIF support

Add hscif{0|1|2} nodes to dtsi for HSCIF support on the
RZ/G1C (r8a77470) SoC.
Signed-off-by: default avatarCao Van Dong <cv-dong@jinso.co.jp>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent a7586ad9
......@@ -588,6 +588,54 @@ scif5: serial@e6ee8000 {
status = "disabled";
};
hscif0: serial@e62c0000 {
compatible = "renesas,hscif-r8a77470",
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 0x60>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 717>,
<&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 717>;
status = "disabled";
};
hscif1: serial@e62c8000 {
compatible = "renesas,hscif-r8a77470",
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 0x60>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 716>,
<&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 716>;
status = "disabled";
};
hscif2: serial@e62d0000 {
compatible = "renesas,hscif-r8a77470",
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 0x60>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 713>,
<&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
<&dmac1 0x3b>, <&dmac1 0x3c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 713>;
status = "disabled";
};
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment