Commit f4151b9b authored by Stefan Roese's avatar Stefan Roese Committed by Josh Boyer

[POWERPC] 4xx: Fix TLB 0 problem with CONFIG_SERIAL_TEXT_DEBUG

Right now TLB entry 0 ist used as UART0 mapping for the early debug
output (via CONFIG_SERIAL_TEXT_DEBUG). This causes problems when many
TLB's get used upon Linux bootup (e.g. while PCIe scanning behind
bridges and/or switches on 440SPe platforms). This will overwrite the
TLB 0 entry and further debug output's may crash/hang the system.

This patch moves the early debug UART0 TLB entry from 0 to 62 as done
in arch/powerpc. This way it is in the "pinned" area and will not get
overwritten. Also the arch/ppc/mm/44x_mmu.c code is now synced with the
newer code from arch/powerpc.
Signed-off-by: default avatarStefan Roese <sr@denx.de>
Signed-off-by: default avatarJosh Boyer <jwboyer@linux.vnet.ibm.com>
parent 4922566f
......@@ -195,7 +195,7 @@ skpinv: addi r4,r4,1 /* Increment */
li r5,0
ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
li r0,0 /* TLB slot 0 */
li r0,62 /* TLB slot 62 */
tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
......
......@@ -60,38 +60,28 @@ extern char etext[], _stext[];
* Just needed it declared someplace.
*/
unsigned int tlb_44x_index = 0;
unsigned int tlb_44x_hwater = 62;
unsigned int tlb_44x_hwater = PPC4XX_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
int icache_44x_need_flush;
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem
*/
static void __init
ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys)
static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
{
unsigned long attrib = 0;
__asm__ __volatile__("\
clrrwi %2,%2,10\n\
ori %2,%2,%4\n\
clrrwi %1,%1,10\n\
li %0,0\n\
ori %0,%0,%5\n\
tlbwe %2,%3,%6\n\
tlbwe %1,%3,%7\n\
tlbwe %0,%3,%8"
__asm__ __volatile__(
"tlbwe %2,%3,%4\n"
"tlbwe %1,%3,%5\n"
"tlbwe %0,%3,%6\n"
:
: "r" (attrib), "r" (phys), "r" (virt), "r" (slot),
"i" (PPC44x_TLB_VALID | PPC44x_TLB_256M),
"i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
"r" (phys),
"r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
"r" (tlb_44x_hwater--), /* slot for this TLB entry */
"i" (PPC44x_TLB_PAGEID),
"i" (PPC44x_TLB_XLAT),
"i" (PPC44x_TLB_ATTRIB));
}
/*
* MMU_init_hw does the chip-specific initialization of the MMU hardware.
*/
void __init MMU_init_hw(void)
{
flush_instruction_cache();
......@@ -99,22 +89,13 @@ void __init MMU_init_hw(void)
unsigned long __init mmu_mapin_ram(void)
{
unsigned int pinned_tlbs = 1;
int i;
/* Determine number of entries necessary to cover lowmem */
pinned_tlbs = (unsigned int)
(_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT);
/* Write upper watermark to save location */
tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
unsigned long addr;
/* If necessary, set additional pinned TLBs */
if (pinned_tlbs > 1)
for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE;
ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
}
/* Pin in enough TLBs to cover any lowmem not covered by the
* initial 256M mapping established in head_44x.S */
for (addr = PPC_PIN_SIZE; addr < total_lowmem;
addr += PPC_PIN_SIZE)
ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
return total_lowmem;
}
......@@ -383,6 +383,12 @@ typedef struct _P601_BAT {
#define BOOKE_PAGESZ_256GB 14
#define BOOKE_PAGESZ_1TB 15
#ifndef CONFIG_SERIAL_TEXT_DEBUG
#define PPC44x_EARLY_TLBS 1
#else
#define PPC44x_EARLY_TLBS 2
#endif
/*
* Freescale Book-E MMU support
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment