Skip to content

L
linux
Commit f4199f85 authored by Tomas Novotny's avatar Tomas Novotny Committed by Linus Torvalds
Browse files
Options

rtc: ds1307: add support for mcp7940x chips 

MCP7940x is same RTC as MCP7941x.  The difference is that MCP7941x chips
contain additional EEPROM on a different i2c address.

DS1307 driver already supports MCP7941x, so just add a new i2c device id
and rename functions and defines accordingly.
Signed-off-by: default avatarTomas Novotny <tomas@novotny.cz>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 920f91e5
Hide whitespace changes
Inline Side-by-side
Showing with 64 additions and 63 deletions
drivers/rtc/rtc-ds1307.c
View file @ f4199f85
......@@ -35,7 +35,7 @@ enum ds_type {
ds_1388,
ds_3231,
m41t00,
mcp7941x,
mcp794xx,
rx_8025,
last_ds_type /* always last */
/* rs5c372 too? different address... */
......@@ -46,7 +46,7 @@ enum ds_type {
#define DS1307_REG_SECS 0x00 /* 00-59 */
# define DS1307_BIT_CH 0x80
# define DS1340_BIT_nEOSC 0x80
# define MCP7941X_BIT_ST 0x80
# define MCP794XX_BIT_ST 0x80
#define DS1307_REG_MIN 0x01 /* 00-59 */
#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
......@@ -54,7 +54,7 @@ enum ds_type {
# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
#define DS1307_REG_WDAY 0x03 /* 01-07 */
# define MCP7941X_BIT_VBATEN 0x08
# define MCP794XX_BIT_VBATEN 0x08
#define DS1307_REG_MDAY 0x04 /* 01-31 */
#define DS1307_REG_MONTH 0x05 /* 01-12 */
# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
......@@ -159,7 +159,7 @@ static struct chip_desc chips[last_ds_type] = {
[ds_3231] = {
.alarm = 1,
},
[mcp7941x] = {
[mcp794xx] = {
.alarm = 1,
/* this is battery backed SRAM */
.nvram_offset = 0x20,
......@@ -176,7 +176,8 @@ static const struct i2c_device_id ds1307_id[] = {
{ "ds1340", ds_1340 },
{ "ds3231", ds_3231 },
{ "m41t00", m41t00 },
{ "mcp7941x", mcp7941x },
{ "mcp7940x", mcp794xx },
{ "mcp7941x", mcp794xx },
{ "pt7c4338", ds_1307 },
{ "rx8025", rx_8025 },
{ }
......@@ -439,14 +440,14 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN
| DS1340_BIT_CENTURY;
break;
case mcp7941x:
case mcp794xx:
/*
* these bits were cleared when preparing the date/time
* values and need to be set again before writing the
* buffer out to the device.
*/
buf[DS1307_REG_SECS] |= MCP7941X_BIT_ST;
buf[DS1307_REG_WDAY] |= MCP7941X_BIT_VBATEN;
buf[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
buf[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
break;
default:
break;
......@@ -614,26 +615,26 @@ static const struct rtc_class_ops ds13xx_rtc_ops = {
/*----------------------------------------------------------------------*/
/*
* Alarm support for mcp7941x devices.
* Alarm support for mcp794xx devices.
*/
#define MCP7941X_REG_CONTROL 0x07
# define MCP7941X_BIT_ALM0_EN 0x10
# define MCP7941X_BIT_ALM1_EN 0x20
#define MCP7941X_REG_ALARM0_BASE 0x0a
#define MCP7941X_REG_ALARM0_CTRL 0x0d
#define MCP7941X_REG_ALARM1_BASE 0x11
#define MCP7941X_REG_ALARM1_CTRL 0x14
# define MCP7941X_BIT_ALMX_IF (1 << 3)
# define MCP7941X_BIT_ALMX_C0 (1 << 4)
# define MCP7941X_BIT_ALMX_C1 (1 << 5)
# define MCP7941X_BIT_ALMX_C2 (1 << 6)
# define MCP7941X_BIT_ALMX_POL (1 << 7)
# define MCP7941X_MSK_ALMX_MATCH (MCP7941X_BIT_ALMX_C0 | \
MCP7941X_BIT_ALMX_C1 | \
MCP7941X_BIT_ALMX_C2)
static void mcp7941x_work(struct work_struct *work)
#define MCP794XX_REG_CONTROL 0x07
# define MCP794XX_BIT_ALM0_EN 0x10
# define MCP794XX_BIT_ALM1_EN 0x20
#define MCP794XX_REG_ALARM0_BASE 0x0a
#define MCP794XX_REG_ALARM0_CTRL 0x0d
#define MCP794XX_REG_ALARM1_BASE 0x11
#define MCP794XX_REG_ALARM1_CTRL 0x14
# define MCP794XX_BIT_ALMX_IF (1 << 3)
# define MCP794XX_BIT_ALMX_C0 (1 << 4)
# define MCP794XX_BIT_ALMX_C1 (1 << 5)
# define MCP794XX_BIT_ALMX_C2 (1 << 6)
# define MCP794XX_BIT_ALMX_POL (1 << 7)
# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
MCP794XX_BIT_ALMX_C1 | \
MCP794XX_BIT_ALMX_C2)
static void mcp794xx_work(struct work_struct *work)
{
struct ds1307 *ds1307 = container_of(work, struct ds1307, work);
struct i2c_client *client = ds1307->client;
......@@ -642,22 +643,22 @@ static void mcp7941x_work(struct work_struct *work)
mutex_lock(&ds1307->rtc->ops_lock);
/* Check and clear alarm 0 interrupt flag. */
reg = i2c_smbus_read_byte_data(client, MCP7941X_REG_ALARM0_CTRL);
reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_ALARM0_CTRL);
if (reg < 0)
goto out;
if (!(reg & MCP7941X_BIT_ALMX_IF))
if (!(reg & MCP794XX_BIT_ALMX_IF))
goto out;
reg &= ~MCP7941X_BIT_ALMX_IF;
ret = i2c_smbus_write_byte_data(client, MCP7941X_REG_ALARM0_CTRL, reg);
reg &= ~MCP794XX_BIT_ALMX_IF;
ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_ALARM0_CTRL, reg);
if (ret < 0)
goto out;
/* Disable alarm 0. */
reg = i2c_smbus_read_byte_data(client, MCP7941X_REG_CONTROL);
reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
if (reg < 0)
goto out;
reg &= ~MCP7941X_BIT_ALM0_EN;
ret = i2c_smbus_write_byte_data(client, MCP7941X_REG_CONTROL, reg);
reg &= ~MCP794XX_BIT_ALM0_EN;
ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
if (ret < 0)
goto out;
......@@ -669,7 +670,7 @@ static void mcp7941x_work(struct work_struct *work)
mutex_unlock(&ds1307->rtc->ops_lock);
}
static int mcp7941x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct i2c_client *client = to_i2c_client(dev);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
......@@ -680,11 +681,11 @@ static int mcp7941x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
return -EINVAL;
/* Read control and alarm 0 registers. */
ret = ds1307->read_block_data(client, MCP7941X_REG_CONTROL, 10, regs);
ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
if (ret < 0)
return ret;
t->enabled = !!(regs[0] & MCP7941X_BIT_ALM0_EN);
t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
/* Report alarm 0 time assuming 24-hour and day-of-month modes. */
t->time.tm_sec = bcd2bin(ds1307->regs[3] & 0x7f);
......@@ -701,14 +702,14 @@ static int mcp7941x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
"enabled=%d polarity=%d irq=%d match=%d\n", __func__,
t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
!!(ds1307->regs[6] & MCP7941X_BIT_ALMX_POL),
!!(ds1307->regs[6] & MCP7941X_BIT_ALMX_IF),
(ds1307->regs[6] & MCP7941X_MSK_ALMX_MATCH) >> 4);
!!(ds1307->regs[6] & MCP794XX_BIT_ALMX_POL),
!!(ds1307->regs[6] & MCP794XX_BIT_ALMX_IF),
(ds1307->regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4);
return 0;
}
static int mcp7941x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct i2c_client *client = to_i2c_client(dev);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
......@@ -725,7 +726,7 @@ static int mcp7941x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
t->enabled, t->pending);
/* Read control and alarm 0 registers. */
ret = ds1307->read_block_data(client, MCP7941X_REG_CONTROL, 10, regs);
ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
if (ret < 0)
return ret;
......@@ -738,23 +739,23 @@ static int mcp7941x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
regs[8] = bin2bcd(t->time.tm_mon) + 1;
/* Clear the alarm 0 interrupt flag. */
regs[6] &= ~MCP7941X_BIT_ALMX_IF;
regs[6] &= ~MCP794XX_BIT_ALMX_IF;
/* Set alarm match: second, minute, hour, day, date, month. */
regs[6] |= MCP7941X_MSK_ALMX_MATCH;
regs[6] |= MCP794XX_MSK_ALMX_MATCH;
if (t->enabled)
regs[0] |= MCP7941X_BIT_ALM0_EN;
regs[0] |= MCP794XX_BIT_ALM0_EN;
else
regs[0] &= ~MCP7941X_BIT_ALM0_EN;
regs[0] &= ~MCP794XX_BIT_ALM0_EN;
ret = ds1307->write_block_data(client, MCP7941X_REG_CONTROL, 10, regs);
ret = ds1307->write_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
if (ret < 0)
return ret;
return 0;
}
static int mcp7941x_alarm_irq_enable(struct device *dev, unsigned int enabled)
static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct i2c_client *client = to_i2c_client(dev);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
......@@ -763,24 +764,24 @@ static int mcp7941x_alarm_irq_enable(struct device *dev, unsigned int enabled)
if (!test_bit(HAS_ALARM, &ds1307->flags))
return -EINVAL;
reg = i2c_smbus_read_byte_data(client, MCP7941X_REG_CONTROL);
reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
if (reg < 0)
return reg;
if (enabled)
reg |= MCP7941X_BIT_ALM0_EN;
reg |= MCP794XX_BIT_ALM0_EN;
else
reg &= ~MCP7941X_BIT_ALM0_EN;
reg &= ~MCP794XX_BIT_ALM0_EN;
return i2c_smbus_write_byte_data(client, MCP7941X_REG_CONTROL, reg);
return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
}
static const struct rtc_class_ops mcp7941x_rtc_ops = {
static const struct rtc_class_ops mcp794xx_rtc_ops = {
.read_time = ds1307_get_time,
.set_time = ds1307_set_time,
.read_alarm = mcp7941x_read_alarm,
.set_alarm = mcp7941x_set_alarm,
.alarm_irq_enable = mcp7941x_alarm_irq_enable,
.read_alarm = mcp794xx_read_alarm,
.set_alarm = mcp794xx_set_alarm,
.alarm_irq_enable = mcp794xx_alarm_irq_enable,
};
/*----------------------------------------------------------------------*/
......@@ -1049,10 +1050,10 @@ static int ds1307_probe(struct i2c_client *client,
case ds_1388:
ds1307->offset = 1; /* Seconds starts at 1 */
break;
case mcp7941x:
rtc_ops = &mcp7941x_rtc_ops;
case mcp794xx:
rtc_ops = &mcp794xx_rtc_ops;
if (ds1307->client->irq > 0 && chip->alarm) {
INIT_WORK(&ds1307->work, mcp7941x_work);
INIT_WORK(&ds1307->work, mcp794xx_work);
want_irq = true;
}
break;
......@@ -1117,18 +1118,18 @@ static int ds1307_probe(struct i2c_client *client,
dev_warn(&client->dev, "SET TIME!\n");
}
break;
case mcp7941x:
case mcp794xx:
/* make sure that the backup battery is enabled */
if (!(ds1307->regs[DS1307_REG_WDAY] & MCP7941X_BIT_VBATEN)) {
if (!(ds1307->regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
ds1307->regs[DS1307_REG_WDAY]
| MCP7941X_BIT_VBATEN);
| MCP794XX_BIT_VBATEN);
}
/* clock halted? turn it on, so clock can tick. */
if (!(tmp & MCP7941X_BIT_ST)) {
if (!(tmp & MCP794XX_BIT_ST)) {
i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
MCP7941X_BIT_ST);
MCP794XX_BIT_ST);
dev_warn(&client->dev, "SET TIME!\n");
goto read_rtc;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7