Commit f458ebbc authored by Daniel Vetter's avatar Daniel Vetter

drm/i915: Bikeshed rpm functions name a bit.

- fini goes with init, so call it intel_power_domains_fini. While
  at it shovel some of the fini code that leaked out of it back in.

- give power_enabled functions the verb _is_ to make the meaning clearer.
  Also use a __ prefix instead of _unlocked to really discourage users.

- rename runtime_pm_init/fini to enable/disable since that's what they do.
Reviewed-by: default avatarImre Deak <imre.deak@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 9c065a7d
......@@ -716,7 +716,7 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
}
for_each_pipe(dev_priv, pipe) {
if (!intel_display_power_enabled(dev_priv,
if (!intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_PIPE(pipe))) {
seq_printf(m, "Pipe %c power disabled\n",
pipe_name(pipe));
......
......@@ -1798,12 +1798,12 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
if (IS_GEN5(dev))
intel_gpu_ips_init(dev_priv);
intel_init_runtime_pm(dev_priv);
intel_runtime_pm_enable(dev_priv);
return 0;
out_power_well:
intel_power_domains_remove(dev_priv);
intel_power_domains_fini(dev_priv);
drm_vblank_cleanup(dev);
out_gem_unload:
WARN_ON(unregister_oom_notifier(&dev_priv->mm.oom_notifier));
......@@ -1846,15 +1846,11 @@ int i915_driver_unload(struct drm_device *dev)
return ret;
}
intel_fini_runtime_pm(dev_priv);
intel_runtime_pm_disable(dev_priv);
intel_gpu_ips_teardown();
/* The i915.ko module is still not prepared to be loaded when
* the power well is not enabled, so just enable it in case
* we're going to unload/reload. */
intel_display_set_init_power(dev_priv, true);
intel_power_domains_remove(dev_priv);
intel_power_domains_fini(dev_priv);
i915_teardown_sysfs(dev);
......
......@@ -1411,7 +1411,7 @@ struct ilk_wm_values {
*
* Our driver uses the autosuspend delay feature, which means we'll only really
* suspend if we stay with zero refcount for a certain amount of time. The
* default value is currently very conservative (see intel_init_runtime_pm), but
* default value is currently very conservative (see intel_runtime_pm_enable), but
* it can be changed with the standard runtime PM files from sysfs.
*
* The irqs_disabled variable becomes true exactly after we disable the IRQs and
......
......@@ -3473,8 +3473,8 @@ static void gen8_irq_reset(struct drm_device *dev)
gen8_gt_irq_reset(dev_priv);
for_each_pipe(dev_priv, pipe)
if (intel_display_power_enabled(dev_priv,
POWER_DOMAIN_PIPE(pipe)))
if (intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_PIPE(pipe)))
GEN8_IRQ_RESET_NDX(DE_PIPE, pipe);
GEN5_IRQ_RESET(GEN8_DE_PORT_);
......@@ -3826,7 +3826,7 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
dev_priv->de_irq_mask[PIPE_C] = ~de_pipe_masked;
for_each_pipe(dev_priv, pipe)
if (intel_display_power_enabled(dev_priv,
if (intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_PIPE(pipe)))
GEN8_IRQ_INIT_NDX(DE_PIPE, pipe,
dev_priv->de_irq_mask[pipe],
......
......@@ -72,7 +72,7 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
u32 tmp;
power_domain = intel_display_port_power_domain(encoder);
if (!intel_display_power_enabled(dev_priv, power_domain))
if (!intel_display_power_is_enabled(dev_priv, power_domain))
return false;
tmp = I915_READ(crt->adpa_reg);
......
......@@ -998,7 +998,7 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
uint32_t tmp;
power_domain = intel_display_port_power_domain(intel_encoder);
if (!intel_display_power_enabled(dev_priv, power_domain))
if (!intel_display_power_is_enabled(dev_priv, power_domain))
return false;
if (!intel_encoder->get_hw_state(intel_encoder, &pipe))
......@@ -1044,7 +1044,7 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
int i;
power_domain = intel_display_port_power_domain(encoder);
if (!intel_display_power_enabled(dev_priv, power_domain))
if (!intel_display_power_is_enabled(dev_priv, power_domain))
return false;
tmp = I915_READ(DDI_BUF_CTL(port));
......@@ -1332,7 +1332,7 @@ static bool hsw_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
{
uint32_t val;
if (!intel_display_power_enabled(dev_priv, POWER_DOMAIN_PLLS))
if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PLLS))
return false;
val = I915_READ(WRPLL_CTL(pll->id));
......@@ -1522,7 +1522,7 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
break;
}
if (intel_display_power_enabled(dev_priv, POWER_DOMAIN_AUDIO)) {
if (intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO)) {
temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
if (temp & (AUDIO_OUTPUT_ENABLE_A << (intel_crtc->pipe * 4)))
pipe_config->has_audio = true;
......
......@@ -1210,7 +1210,7 @@ void assert_pipe(struct drm_i915_private *dev_priv,
(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
state = true;
if (!intel_display_power_enabled(dev_priv,
if (!intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
cur_state = false;
} else {
......@@ -6493,8 +6493,8 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t tmp;
if (!intel_display_power_enabled(dev_priv,
POWER_DOMAIN_PIPE(crtc->pipe)))
if (!intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_PIPE(crtc->pipe)))
return false;
pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
......@@ -7503,8 +7503,8 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t tmp;
if (!intel_display_power_enabled(dev_priv,
POWER_DOMAIN_PIPE(crtc->pipe)))
if (!intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_PIPE(crtc->pipe)))
return false;
pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
......@@ -7902,7 +7902,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
enum intel_display_power_domain pfit_domain;
uint32_t tmp;
if (!intel_display_power_enabled(dev_priv,
if (!intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_PIPE(crtc->pipe)))
return false;
......@@ -7931,7 +7931,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
pipe_config->cpu_transcoder = TRANSCODER_EDP;
}
if (!intel_display_power_enabled(dev_priv,
if (!intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
return false;
......@@ -7944,7 +7944,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
intel_get_pipe_timings(crtc, pipe_config);
pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
if (intel_display_power_enabled(dev_priv, pfit_domain))
if (intel_display_power_is_enabled(dev_priv, pfit_domain))
ironlake_get_pfit_config(crtc, pipe_config);
if (IS_HASWELL(dev))
......@@ -11534,7 +11534,7 @@ static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
{
uint32_t val;
if (!intel_display_power_enabled(dev_priv, POWER_DOMAIN_PLLS))
if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PLLS))
return false;
val = I915_READ(PCH_DPLL(pll->id));
......@@ -13165,7 +13165,7 @@ void i915_redisable_vga(struct drm_device *dev)
* level, just check if the power well is enabled instead of trying to
* follow the "don't touch the power well if we don't need it" policy
* the rest of the driver uses. */
if (!intel_display_power_enabled(dev_priv, POWER_DOMAIN_VGA))
if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_VGA))
return;
i915_redisable_vga_power_on(dev);
......@@ -13543,8 +13543,8 @@ intel_display_capture_error_state(struct drm_device *dev)
for_each_pipe(dev_priv, i) {
error->pipe[i].power_domain_on =
intel_display_power_enabled_unlocked(dev_priv,
POWER_DOMAIN_PIPE(i));
__intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_PIPE(i));
if (!error->pipe[i].power_domain_on)
continue;
......@@ -13579,7 +13579,7 @@ intel_display_capture_error_state(struct drm_device *dev)
enum transcoder cpu_transcoder = transcoders[i];
error->transcoder[i].power_domain_on =
intel_display_power_enabled_unlocked(dev_priv,
__intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_TRANSCODER(cpu_transcoder));
if (!error->transcoder[i].power_domain_on)
continue;
......
......@@ -1853,7 +1853,7 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder,
u32 tmp;
power_domain = intel_display_port_power_domain(encoder);
if (!intel_display_power_enabled(dev_priv, power_domain))
if (!intel_display_power_is_enabled(dev_priv, power_domain))
return false;
tmp = I915_READ(intel_dp->output_reg);
......
......@@ -1083,15 +1083,15 @@ extern struct drm_display_mode *intel_find_panel_downclock(
/* intel_runtime_pm.c */
int intel_power_domains_init(struct drm_i915_private *);
void intel_power_domains_remove(struct drm_i915_private *);
void intel_power_domains_fini(struct drm_i915_private *);
void intel_power_domains_init_hw(struct drm_i915_private *dev_priv);
void intel_init_runtime_pm(struct drm_i915_private *dev_priv);
void intel_fini_runtime_pm(struct drm_i915_private *dev_priv);
void intel_runtime_pm_enable(struct drm_i915_private *dev_priv);
void intel_runtime_pm_disable(struct drm_i915_private *dev_priv);
bool intel_display_power_enabled(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain);
bool intel_display_power_enabled_unlocked(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain);
bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain);
bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain);
void intel_display_power_get(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain);
void intel_display_power_put(struct drm_i915_private *dev_priv,
......
......@@ -344,7 +344,7 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
DRM_DEBUG_KMS("\n");
power_domain = intel_display_port_power_domain(encoder);
if (!intel_display_power_enabled(dev_priv, power_domain))
if (!intel_display_power_is_enabled(dev_priv, power_domain))
return false;
/* XXX: this only works for one DSI output */
......
......@@ -690,7 +690,7 @@ static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
u32 tmp;
power_domain = intel_display_port_power_domain(encoder);
if (!intel_display_power_enabled(dev_priv, power_domain))
if (!intel_display_power_is_enabled(dev_priv, power_domain))
return false;
tmp = I915_READ(intel_hdmi->hdmi_reg);
......
......@@ -76,7 +76,7 @@ static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
u32 tmp;
power_domain = intel_display_port_power_domain(encoder);
if (!intel_display_power_enabled(dev_priv, power_domain))
if (!intel_display_power_is_enabled(dev_priv, power_domain))
return false;
tmp = I915_READ(lvds_encoder->reg);
......
......@@ -60,8 +60,8 @@ static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
(HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED);
}
bool intel_display_power_enabled_unlocked(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain)
bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain)
{
struct i915_power_domains *power_domains;
struct i915_power_well *power_well;
......@@ -88,8 +88,8 @@ bool intel_display_power_enabled_unlocked(struct drm_i915_private *dev_priv,
return is_enabled;
}
bool intel_display_power_enabled(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain)
bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
enum intel_display_power_domain domain)
{
struct i915_power_domains *power_domains;
bool ret;
......@@ -97,7 +97,7 @@ bool intel_display_power_enabled(struct drm_i915_private *dev_priv,
power_domains = &dev_priv->power_domains;
mutex_lock(&power_domains->lock);
ret = intel_display_power_enabled_unlocked(dev_priv, domain);
ret = __intel_display_power_is_enabled(dev_priv, domain);
mutex_unlock(&power_domains->lock);
return ret;
......@@ -981,8 +981,13 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
return 0;
}
void intel_power_domains_remove(struct drm_i915_private *dev_priv)
void intel_power_domains_fini(struct drm_i915_private *dev_priv)
{
/* The i915.ko module is still not prepared to be loaded when
* the power well is not enabled, so just enable it in case
* we're going to unload/reload. */
intel_display_set_init_power(dev_priv, true);
hsw_pwr = NULL;
}
......@@ -1097,7 +1102,7 @@ void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
pm_runtime_put_autosuspend(device);
}
void intel_init_runtime_pm(struct drm_i915_private *dev_priv)
void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
struct device *device = &dev->pdev->dev;
......@@ -1123,7 +1128,7 @@ void intel_init_runtime_pm(struct drm_i915_private *dev_priv)
pm_runtime_put_autosuspend(device);
}
void intel_fini_runtime_pm(struct drm_i915_private *dev_priv)
void intel_runtime_pm_disable(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
struct device *device = &dev->pdev->dev;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment