[ATM]: [drivers] fix warnings related to readl/writel changes

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/atm/firestream.c

@@ -1667,7 +1667,7 @@ static int __devinit fs_init (struct fs_dev *dev)
 
 	dev->hw_base = pci_resource_start(pci_dev, 0);
 
-	dev->base = (ulong) ioremap(dev->hw_base, 0x1000);
+	dev->base = ioremap(dev->hw_base, 0x1000);
 
 	reset_chip (dev);
   

drivers/atm/firestream.h

@@ -477,7 +477,7 @@ struct fs_dev {
 	struct timer_list timer;
 
 	unsigned long hw_base;		/* mem base address */
-	unsigned long base;             /* Mapping of base address */
+	void *base;             /* Mapping of base address */
 	int channo;
 	unsigned long channel_mask;
 

drivers/atm/he.c

@@ -1007,6 +1007,7 @@ he_start(struct atm_dev *dev)
 {
 	struct he_dev *he_dev;
 	struct pci_dev *pci_dev;
+	unsigned long membase;
 
 	u16 command;
 	u32 gen_cntl_0, host_cntl, lb_swap;
@@ -1019,8 +1020,8 @@ he_start(struct atm_dev *dev)
 	he_dev = HE_DEV(dev);
 	pci_dev = he_dev->pci_dev;
 
-	he_dev->membase = pci_dev->resource[0].start;
-	HPRINTK("membase = 0x%lx  irq = %d.\n", he_dev->membase, pci_dev->irq);
+	membase = pci_resource_start(pci_dev, 0);
+	HPRINTK("membase = 0x%lx  irq = %d.\n", membase, pci_dev->irq);
 
 	/*
 	 * pci bus controller initialization 
@@ -1080,7 +1081,7 @@ he_start(struct atm_dev *dev)
 			hprintk("can't set latency timer to %d\n", timer);
 	}
 
-	if (!(he_dev->membase = (unsigned long) ioremap(he_dev->membase, HE_REGMAP_SIZE))) {
+	if (!(he_dev->membase = ioremap(membase, HE_REGMAP_SIZE))) {
 		hprintk("can't set up page mapping\n");
 		return -EINVAL;
 	}

drivers/atm/he.h

@@ -265,7 +265,7 @@ struct he_cs_stper
 struct he_dev {
 	unsigned int number;
 	unsigned int irq;
-	unsigned long membase;
+	void *membase;
 
 	char prod_id[30];
 	char mac_addr[6];

drivers/atm/idt77252.c

@@ -3164,7 +3164,7 @@ deinit_card(struct idt77252_dev *card)
 
 	for (i = 0; i < 4; i++) {
 		if (card->fbq[i])
-			iounmap((void *) card->fbq[i]);
+			iounmap(card->fbq[i]);
 	}
 
 	if (card->membase)
@@ -3722,7 +3722,7 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
 	card->tst_timer.function = tst_timer;
 
 	/* Do the I/O remapping... */
-	card->membase = (unsigned long) ioremap(membase, 1024);
+	card->membase = ioremap(membase, 1024);
 	if (!card->membase) {
 		printk("%s: can't ioremap() membase\n", card->name);
 		err = -EIO;
@@ -3756,8 +3756,7 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
 	card->sramsize = probe_sram(card);
 
 	for (i = 0; i < 4; i++) {
-		card->fbq[i] = (unsigned long)
-			    ioremap(srambase | 0x200000 | (i << 18), 4);
+		card->fbq[i] = ioremap(srambase | 0x200000 | (i << 18), 4);
 		if (!card->fbq[i]) {
 			printk("%s: can't ioremap() FBQ%d\n", card->name, i);
 			err = -EIO;

drivers/atm/idt77252.h

@@ -355,9 +355,9 @@ struct idt77252_dev
 	struct pci_dev		*pcidev;	/* PCI handle (desriptor) */
 	struct atm_dev		*atmdev;	/* ATM device desriptor */
 
-	unsigned long		membase;	/* SAR's memory base address */
+	void			*membase;	/* SAR's memory base address */
 	unsigned long		srambase;	/* SAR's sram  base address */
-	unsigned long		fbq[4];		/* FBQ fill addresses */
+	void 			*fbq[4];	/* FBQ fill addresses */
 
 	struct semaphore	mutex;
 	spinlock_t		cmd_lock;	/* for r/w utility/sram */

drivers/atm/lanai.c

@@ -191,7 +191,7 @@
 #define LANAI_EEPROM_SIZE	(128)
 
 typedef int vci_t;
-typedef unsigned long bus_addr_t;
+typedef void *bus_addr_t;
 
 /* DMA buffer in host memory for TX, RX, or service list. */
 struct lanai_buffer {
@@ -471,7 +471,7 @@ enum lanai_register {
 static inline bus_addr_t reg_addr(const struct lanai_dev *lanai,
 	enum lanai_register reg)
 {
-	return lanai->base + (bus_addr_t) reg;
+	return lanai->base + reg;
 }
 
 static inline u32 reg_read(const struct lanai_dev *lanai,
@@ -651,7 +651,7 @@ static inline u32 cardvcc_read(const struct lanai_vcc *lvcc,
 {
 	u32 val;
 	APRINTK(lvcc->vbase != 0, "cardvcc_read: unbound vcc!\n");
-	val= readl(lvcc->vbase + (bus_addr_t) offset);
+	val= readl(lvcc->vbase + offset);
 	RWDEBUG("VR vci=%04d 0x%02X = 0x%08X\n",
 	    lvcc->vci, (int) offset, val);
 	return val;
@@ -666,7 +666,7 @@ static inline void cardvcc_write(const struct lanai_vcc *lvcc,
 	    (unsigned int) val, lvcc->vci, (unsigned int) offset);
 	RWDEBUG("VW vci=%04d 0x%02X > 0x%08X\n",
 	    lvcc->vci, (unsigned int) offset, (unsigned int) val);
-	writel(val, lvcc->vbase + (bus_addr_t) offset);
+	writel(val, lvcc->vbase + offset);
 }
 
 /* -------------------- COMPUTE SIZE OF AN AAL5 PDU: */
@@ -2177,7 +2177,7 @@ static int __init lanai_dev_open(struct atm_dev *atmdev)
 	/* 3.2: PCI initialization */
 	if ((result = lanai_pci_start(lanai)) != 0)
 		goto error;
-	raw_base = (bus_addr_t) lanai->pci->resource[0].start;
+	raw_base = lanai->pci->resource[0].start;
 	lanai->base = (bus_addr_t) ioremap(raw_base, LANAI_MAPPING_SIZE);
 	if (lanai->base == 0) {
 		printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");

drivers/atm/nicstar.c

@@ -467,6 +467,7 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev)
    u32 u32d[4];
    u32 ns_cfg_rctsize;
    int bcount;
+   unsigned long membase;
 
    error = 0;
 
@@ -494,8 +495,8 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev)
    card->index = i;
    card->atmdev = NULL;
    card->pcidev = pcidev;
-   card->membase = pci_resource_start(pcidev, 1);
-   card->membase = (unsigned long) ioremap(card->membase, NS_IOREMAP_SIZE);
+   membase = pci_resource_start(pcidev, 1);
+   card->membase = ioremap(membase, NS_IOREMAP_SIZE);
    if (card->membase == 0)
    {
       printk("nicstar%d: can't ioremap() membase.\n",i);

drivers/atm/nicstar.h

@@ -763,7 +763,7 @@ typedef struct ns_dev
 {
    int index;				/* Card ID to the device driver */
    int sram_size;			/* In k x 32bit words. 32 or 128 */
-   unsigned long membase;			/* Card's memory base address */
+   void *membase;			/* Card's memory base address */
    unsigned long max_pcr;
    int rct_size;			/* Number of entries */
    int vpibits;

drivers/atm/nicstarmac.c

@@ -162,7 +162,7 @@ nicstar_read_eprom_status( virt_addr_t base )
  */
  
 static u_int8_t 
-read_eprom_byte(u_int32_t base, u_int8_t offset)
+read_eprom_byte(virt_addr_t base, u_int8_t offset)
 {
    u_int32_t val = 0;
    int i,j=0;

drivers/atm/nicstarmac.h

@@ -7,7 +7,7 @@
  ******************************************************************************/
 
 
-typedef unsigned int virt_addr_t;
+typedef void * virt_addr_t;
 
 u_int32_t nicstar_read_eprom_status( virt_addr_t base );
 void nicstar_init_eprom( virt_addr_t base );