Commit f4ffd5e5 authored by Rob Herring's avatar Rob Herring

pci: move microblaze and powerpc pci flag functions into asm-generic

Move separate microblaze and powerpc pci flag functions pci_set_flags,
pci_add_flags, and pci_has_flag into asm-generic/pci-bridge.h so other
archs can use them.
Signed-off-by: default avatarRob Herring <rob.herring@calxeda.com>
Acked-by: default avatarNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: default avatarMichal Simek <monstr@monstr.eu>
parent 0e47ff1c
...@@ -10,31 +10,19 @@ ...@@ -10,31 +10,19 @@
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/list.h> #include <linux/list.h>
#include <linux/ioport.h> #include <linux/ioport.h>
#include <asm-generic/pci-bridge.h>
struct device_node; struct device_node;
enum { #ifdef CONFIG_PCI
/* Force re-assigning all resources (ignore firmware extern struct list_head hose_list;
* setup completely) extern int pcibios_vaddr_is_ioport(void __iomem *address);
*/ #else
PCI_REASSIGN_ALL_RSRC = 0x00000001, static inline int pcibios_vaddr_is_ioport(void __iomem *address)
{
/* Re-assign all bus numbers */ return 0;
PCI_REASSIGN_ALL_BUS = 0x00000002, }
#endif
/* Do not try to assign, just use existing setup */
PCI_PROBE_ONLY = 0x00000004,
/* Don't bother with ISA alignment unless the bridge has
* ISA forwarding enabled
*/
PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
/* Enable domain numbers in /proc */
PCI_ENABLE_PROC_DOMAINS = 0x00000010,
/* ... except for domain 0 */
PCI_COMPAT_DOMAIN_0 = 0x00000020,
};
/* /*
* Structure of a PCI controller (host bridge) * Structure of a PCI controller (host bridge)
...@@ -164,40 +152,5 @@ extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev); ...@@ -164,40 +152,5 @@ extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb); extern void pcibios_free_controller(struct pci_controller *phb);
extern void pcibios_setup_phb_resources(struct pci_controller *hose); extern void pcibios_setup_phb_resources(struct pci_controller *hose);
#ifdef CONFIG_PCI
extern unsigned int pci_flags;
static inline void pci_set_flags(int flags)
{
pci_flags = flags;
}
static inline void pci_add_flags(int flags)
{
pci_flags |= flags;
}
static inline int pci_has_flag(int flag)
{
return pci_flags & flag;
}
extern struct list_head hose_list;
extern int pcibios_vaddr_is_ioport(void __iomem *address);
#else
static inline int pcibios_vaddr_is_ioport(void __iomem *address)
{
return 0;
}
static inline void pci_set_flags(int flags) { }
static inline void pci_add_flags(int flags) { }
static inline int pci_has_flag(int flag)
{
return 0;
}
#endif /* CONFIG_PCI */
#endif /* __KERNEL__ */ #endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */ #endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */
...@@ -10,58 +10,10 @@ ...@@ -10,58 +10,10 @@
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/list.h> #include <linux/list.h>
#include <linux/ioport.h> #include <linux/ioport.h>
#include <asm-generic/pci-bridge.h>
struct device_node; struct device_node;
enum {
/* Force re-assigning all resources (ignore firmware
* setup completely)
*/
PCI_REASSIGN_ALL_RSRC = 0x00000001,
/* Re-assign all bus numbers */
PCI_REASSIGN_ALL_BUS = 0x00000002,
/* Do not try to assign, just use existing setup */
PCI_PROBE_ONLY = 0x00000004,
/* Don't bother with ISA alignment unless the bridge has
* ISA forwarding enabled
*/
PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
/* Enable domain numbers in /proc */
PCI_ENABLE_PROC_DOMAINS = 0x00000010,
/* ... except for domain 0 */
PCI_COMPAT_DOMAIN_0 = 0x00000020,
};
#ifdef CONFIG_PCI
extern unsigned int pci_flags;
static inline void pci_set_flags(int flags)
{
pci_flags = flags;
}
static inline void pci_add_flags(int flags)
{
pci_flags |= flags;
}
static inline int pci_has_flag(int flag)
{
return (pci_flags & flag);
}
#else
static inline void pci_set_flags(int flags) { }
static inline void pci_add_flags(int flags) { }
static inline int pci_has_flag(int flag)
{
return 0;
}
#endif
/* /*
* Structure of a PCI controller (host bridge) * Structure of a PCI controller (host bridge)
*/ */
......
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ASM_GENERIC_PCI_BRIDGE_H
#define _ASM_GENERIC_PCI_BRIDGE_H
#ifdef __KERNEL__
enum {
/* Force re-assigning all resources (ignore firmware
* setup completely)
*/
PCI_REASSIGN_ALL_RSRC = 0x00000001,
/* Re-assign all bus numbers */
PCI_REASSIGN_ALL_BUS = 0x00000002,
/* Do not try to assign, just use existing setup */
PCI_PROBE_ONLY = 0x00000004,
/* Don't bother with ISA alignment unless the bridge has
* ISA forwarding enabled
*/
PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
/* Enable domain numbers in /proc */
PCI_ENABLE_PROC_DOMAINS = 0x00000010,
/* ... except for domain 0 */
PCI_COMPAT_DOMAIN_0 = 0x00000020,
};
#ifdef CONFIG_PCI
extern unsigned int pci_flags;
static inline void pci_set_flags(int flags)
{
pci_flags = flags;
}
static inline void pci_add_flags(int flags)
{
pci_flags |= flags;
}
static inline int pci_has_flag(int flag)
{
return pci_flags & flag;
}
#else
static inline void pci_set_flags(int flags) { }
static inline void pci_add_flags(int flags) { }
static inline int pci_has_flag(int flag)
{
return 0;
}
#endif /* CONFIG_PCI */
#endif /* __KERNEL__ */
#endif /* _ASM_GENERIC_PCI_BRIDGE_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment