Merge tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.10-rc7 that resolve a number of
  reported issues, and add some new device ids.

  Nothing major here, but these solve some problems that people were
  having with the 5.10-rc tree:

   - reverts for USB storage dma settings that broke working devices

   - thunderbolt use-after-free fix

   - cdns3 driver fixes

   - gadget driver userspace copy fix

   - new device ids

  All of these except for the reverts have been in linux-next with no
  reported issues. The reverts are "clean" and were tested by Hans, as
  well as passing the 0-day tests"

* tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: f_fs: Use local copy of descriptors for userspace copy
  usb: ohci-omap: Fix descriptor conversion
  Revert "usb-storage: fix sdev->host->dma_dev"
  Revert "uas: fix sdev->host->dma_dev"
  Revert "uas: bump hw_max_sectors to 2048 blocks for SS or faster drives"
  USB: serial: kl5kusb105: fix memleak on open
  USB: serial: ch341: sort device-id entries
  USB: serial: ch341: add new Product ID for CH341A
  USB: serial: option: fix Quectel BG96 matching
  usb: cdns3: core: fix goto label for error path
  usb: cdns3: gadget: clear trb->length as zero after preparing every trb
  usb: cdns3: Fix hardware based role switch
  USB: serial: option: add support for Thales Cinterion EXS82
  USB: serial: option: add Fibocom NL668 variants
  thunderbolt: Fix use-after-free in remove_unplugged_switch()

arch/arm/mach-omap1/board-osk.c

@@ -288,7 +288,7 @@ static struct gpiod_lookup_table osk_usb_gpio_table = {
 	.dev_id = "ohci",
 	.table = {
 		/* Power GPIO on the I2C-attached TPS65010 */
-		GPIO_LOOKUP("i2c-tps65010", 1, "power", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("tps65010", 0, "power", GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent",
 			    GPIO_ACTIVE_HIGH),
 	},

drivers/thunderbolt/icm.c

@@ -1976,7 +1976,9 @@ static int complete_rpm(struct device *dev, void *data)
 
 static void remove_unplugged_switch(struct tb_switch *sw)
 {
-	pm_runtime_get_sync(sw->dev.parent);
+	struct device *parent = get_device(sw->dev.parent);
+
+	pm_runtime_get_sync(parent);
 
 	/*
 	 * Signal this and switches below for rpm_complete because
@@ -1987,8 +1989,10 @@ static void remove_unplugged_switch(struct tb_switch *sw)
 	bus_for_each_dev(&tb_bus_type, &sw->dev, NULL, complete_rpm);
 	tb_switch_remove(sw);
 
-	pm_runtime_mark_last_busy(sw->dev.parent);
-	pm_runtime_put_autosuspend(sw->dev.parent);
+	pm_runtime_mark_last_busy(parent);
+	pm_runtime_put_autosuspend(parent);
+
+	put_device(parent);
 }
 
 static void icm_free_unplugged_children(struct tb_switch *sw)

drivers/usb/cdns3/core.c

@@ -427,7 +427,6 @@ static irqreturn_t cdns3_wakeup_irq(int irq, void *data)
  */
 static int cdns3_probe(struct platform_device *pdev)
 {
-	struct usb_role_switch_desc sw_desc = { };
 	struct device *dev = &pdev->dev;
 	struct resource	*res;
 	struct cdns3 *cdns;
@@ -529,18 +528,21 @@ static int cdns3_probe(struct platform_device *pdev)
 	if (ret)
 		goto err2;
 
-	sw_desc.set = cdns3_role_set;
-	sw_desc.get = cdns3_role_get;
-	sw_desc.allow_userspace_control = true;
-	sw_desc.driver_data = cdns;
-	if (device_property_read_bool(dev, "usb-role-switch"))
+	if (device_property_read_bool(dev, "usb-role-switch")) {
+		struct usb_role_switch_desc sw_desc = { };
+
+		sw_desc.set = cdns3_role_set;
+		sw_desc.get = cdns3_role_get;
+		sw_desc.allow_userspace_control = true;
+		sw_desc.driver_data = cdns;
 		sw_desc.fwnode = dev->fwnode;
 
-	cdns->role_sw = usb_role_switch_register(dev, &sw_desc);
-	if (IS_ERR(cdns->role_sw)) {
-		ret = PTR_ERR(cdns->role_sw);
-		dev_warn(dev, "Unable to register Role Switch\n");
-		goto err3;
+		cdns->role_sw = usb_role_switch_register(dev, &sw_desc);
+		if (IS_ERR(cdns->role_sw)) {
+			ret = PTR_ERR(cdns->role_sw);
+			dev_warn(dev, "Unable to register Role Switch\n");
+			goto err3;
+		}
 	}
 
 	if (cdns->wakeup_irq) {
@@ -551,7 +553,7 @@ static int cdns3_probe(struct platform_device *pdev)
 
 		if (ret) {
 			dev_err(cdns->dev, "couldn't register wakeup irq handler\n");
-			goto err3;
+			goto err4;
 		}
 	}
 
@@ -582,7 +584,8 @@ static int cdns3_probe(struct platform_device *pdev)
 	return 0;
 err4:
 	cdns3_drd_exit(cdns);
-	usb_role_switch_unregister(cdns->role_sw);
+	if (cdns->role_sw)
+		usb_role_switch_unregister(cdns->role_sw);
 err3:
 	set_phy_power_off(cdns);
 err2:

drivers/usb/cdns3/gadget.c

@@ -1260,6 +1260,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
 		priv_req->end_trb = priv_ep->enqueue;
 		cdns3_ep_inc_enq(priv_ep);
 		trb = priv_ep->trb_pool + priv_ep->enqueue;
+		trb->length = 0;
 	} while (sg_iter < num_trb);
 
 	trb = priv_req->trb;

drivers/usb/gadget/function/f_fs.c

@@ -1324,7 +1324,7 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code,
 	case FUNCTIONFS_ENDPOINT_DESC:
 	{
 		int desc_idx;
-		struct usb_endpoint_descriptor *desc;
+		struct usb_endpoint_descriptor desc1, *desc;
 
 		switch (epfile->ffs->gadget->speed) {
 		case USB_SPEED_SUPER:
@@ -1336,10 +1336,12 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code,
 		default:
 			desc_idx = 0;
 		}
+
 		desc = epfile->ep->descs[desc_idx];
+		memcpy(&desc1, desc, desc->bLength);
 
 		spin_unlock_irq(&epfile->ffs->eps_lock);
-		ret = copy_to_user((void __user *)value, desc, desc->bLength);
+		ret = copy_to_user((void __user *)value, &desc1, desc1.bLength);
 		if (ret)
 			ret = -EFAULT;
 		return ret;

drivers/usb/host/ohci-omap.c

@@ -91,14 +91,14 @@ static int omap_ohci_transceiver_power(struct ohci_omap_priv *priv, int on)
 				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
 			       INNOVATOR_FPGA_CAM_USB_CONTROL);
 		else if (priv->power)
-			gpiod_set_value(priv->power, 0);
+			gpiod_set_value_cansleep(priv->power, 0);
 	} else {
 		if (machine_is_omap_innovator() && cpu_is_omap1510())
 			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
 				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
 			       INNOVATOR_FPGA_CAM_USB_CONTROL);
 		else if (priv->power)
-			gpiod_set_value(priv->power, 1);
+			gpiod_set_value_cansleep(priv->power, 1);
 	}
 
 	return 0;

drivers/usb/serial/ch341.c

@@ -81,10 +81,11 @@
 #define CH341_QUIRK_SIMULATE_BREAK	BIT(1)
 
 static const struct usb_device_id id_table[] = {
-	{ USB_DEVICE(0x4348, 0x5523) },
+	{ USB_DEVICE(0x1a86, 0x5512) },
+	{ USB_DEVICE(0x1a86, 0x5523) },
 	{ USB_DEVICE(0x1a86, 0x7522) },
 	{ USB_DEVICE(0x1a86, 0x7523) },
-	{ USB_DEVICE(0x1a86, 0x5523) },
+	{ USB_DEVICE(0x4348, 0x5523) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);

drivers/usb/serial/kl5kusb105.c

@@ -276,12 +276,12 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	priv->cfg.unknown2 = cfg->unknown2;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
+	kfree(cfg);
+
 	/* READ_ON and urb submission */
 	rc = usb_serial_generic_open(tty, port);
-	if (rc) {
-		retval = rc;
-		goto err_free_cfg;
-	}
+	if (rc)
+		return rc;
 
 	rc = usb_control_msg(port->serial->dev,
 			     usb_sndctrlpipe(port->serial->dev, 0),
@@ -324,8 +324,6 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 			     KLSI_TIMEOUT);
 err_generic_close:
 	usb_serial_generic_close(port);
-err_free_cfg:
-	kfree(cfg);
 
 	return retval;
 }

drivers/usb/serial/option.c

@@ -419,6 +419,7 @@ static void option_instat_callback(struct urb *urb);
 #define CINTERION_PRODUCT_PH8			0x0053
 #define CINTERION_PRODUCT_AHXX			0x0055
 #define CINTERION_PRODUCT_PLXX			0x0060
+#define CINTERION_PRODUCT_EXS82			0x006c
 #define CINTERION_PRODUCT_PH8_2RMNET		0x0082
 #define CINTERION_PRODUCT_PH8_AUDIO		0x0083
 #define CINTERION_PRODUCT_AHXX_2RMNET		0x0084
@@ -1105,9 +1106,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff),
 	  .driver_info = NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0xff, 0xff),
-	  .driver_info = NUMEP2 },
-	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0, 0) },
+	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
@@ -1902,6 +1902,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_CLS8, 0xff),
 	  .driver_info = RSVD(0) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EXS82, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
@@ -2046,12 +2047,13 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(0x0489, 0xe0b5),						/* Foxconn T77W968 ESIM */
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
-	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 */
+	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x2cb7, 0x0104),						/* Fibocom NL678 series */
 	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
 	  .driver_info = RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */

drivers/usb/storage/scsiglue.c

@@ -92,7 +92,7 @@ static int slave_alloc (struct scsi_device *sdev)
 static int slave_configure(struct scsi_device *sdev)
 {
 	struct us_data *us = host_to_us(sdev->host);
-	struct device *dev = sdev->host->dma_dev;
+	struct device *dev = us->pusb_dev->bus->sysdev;
 
 	/*
 	 * Many devices have trouble transferring more than 32KB at a time,

drivers/usb/storage/uas.c

@@ -837,24 +837,17 @@ static int uas_slave_alloc(struct scsi_device *sdev)
 	 */
 	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
 
+	if (devinfo->flags & US_FL_MAX_SECTORS_64)
+		blk_queue_max_hw_sectors(sdev->request_queue, 64);
+	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
+		blk_queue_max_hw_sectors(sdev->request_queue, 240);
+
 	return 0;
 }
 
 static int uas_slave_configure(struct scsi_device *sdev)
 {
 	struct uas_dev_info *devinfo = sdev->hostdata;
-	struct device *dev = sdev->host->dma_dev;
-
-	if (devinfo->flags & US_FL_MAX_SECTORS_64)
-		blk_queue_max_hw_sectors(sdev->request_queue, 64);
-	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
-		blk_queue_max_hw_sectors(sdev->request_queue, 240);
-	else if (devinfo->udev->speed >= USB_SPEED_SUPER)
-		blk_queue_max_hw_sectors(sdev->request_queue, 2048);
-
-	blk_queue_max_hw_sectors(sdev->request_queue,
-		min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
-		      dma_max_mapping_size(dev) >> SECTOR_SHIFT));
 
 	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
 		sdev->no_report_opcodes = 1;
@@ -1040,7 +1033,7 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	shost->can_queue = devinfo->qdepth - 2;
 
 	usb_set_intfdata(intf, shost);
-	result = scsi_add_host_with_dma(shost, &intf->dev, udev->bus->sysdev);
+	result = scsi_add_host(shost, &intf->dev);
 	if (result)
 		goto free_streams;
 

drivers/usb/storage/usb.c

@@ -1049,9 +1049,8 @@ int usb_stor_probe2(struct us_data *us)
 		goto BadDevice;
 	usb_autopm_get_interface_no_resume(us->pusb_intf);
 	snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
-					dev_name(dev));
-	result = scsi_add_host_with_dma(us_to_host(us), dev,
-					us->pusb_dev->bus->sysdev);
+					dev_name(&us->pusb_intf->dev));
+	result = scsi_add_host(us_to_host(us), dev);
 	if (result) {
 		dev_warn(dev,
 				"Unable to add the scsi host\n");