Commit f558d676 authored by Aradhya Bhatia's avatar Aradhya Bhatia Committed by Neil Armstrong

drm/panel: simple: Add Microtips Technology 13-101HIEBCAF0-C panel

Add support for Microtips Technology USA 13-101HIECAF0-C 10.1",
1920x1200, 8-bit TFT LCD with LVDS interface, LED backlight and touch
support (ILITEK 2511).

[0]: Panel Datasheet
https://simplespec.microtipsusa.com/uploads/spec/datasheetFile/2588/13-101HIEBCAF0-S_V1.1_20221104.pdfSigned-off-by: default avatarAradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: default avatarNeil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240515095133.745492-6-a-bhatia1@ti.comSigned-off-by: default avatarNeil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240515095133.745492-6-a-bhatia1@ti.com
parent ac9b8b7f
......@@ -3055,6 +3055,35 @@ static const struct panel_desc logicpd_type_28 = {
.connector_type = DRM_MODE_CONNECTOR_DPI,
};
static const struct drm_display_mode microtips_mf_101hiebcaf0_c_mode = {
.clock = 150275,
.hdisplay = 1920,
.hsync_start = 1920 + 32,
.hsync_end = 1920 + 32 + 52,
.htotal = 1920 + 32 + 52 + 24,
.vdisplay = 1200,
.vsync_start = 1200 + 24,
.vsync_end = 1200 + 24 + 8,
.vtotal = 1200 + 24 + 8 + 3,
};
static const struct panel_desc microtips_mf_101hiebcaf0_c = {
.modes = &microtips_mf_101hiebcaf0_c_mode,
.bpc = 8,
.num_modes = 1,
.size = {
.width = 217,
.height = 136,
},
.delay = {
.prepare = 50,
.disable = 50,
},
.bus_flags = DRM_BUS_FLAG_DE_HIGH,
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
.clock = 30400,
.hdisplay = 800,
......@@ -4694,6 +4723,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "logictechno,lttd800480070-l6wh-rt",
.data = &logictechno_lttd800480070_l6wh_rt,
}, {
.compatible = "microtips,mf-101hiebcaf0",
.data = &microtips_mf_101hiebcaf0_c,
}, {
.compatible = "mitsubishi,aa070mc01-ca1",
.data = &mitsubishi_aa070mc01,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment