Commit f573de5a authored by Shobhit Kumar's avatar Shobhit Kumar Committed by Daniel Vetter

drm/i915: Add correct hw/sw config check for DSI encoder

Check in vlv_crtc_clock_get if DPLL is enabled before calling dpio read.
It will not be enabled for DSI and avoid dpio read WARN dumps.

Absence of ->get_config was causing other WARN dumps as well. Update
dpll_hw_state as well correctly

v2: Address review comments by Daniel
    - Check if DPLL is enabled rather than checking pipe output type
    - set adjusted_mode->flags to 0 in compute_config rather than using
      pipe_config->quirks
    - Add helper function in intel_dsi_pll.c and use that in intel_dsi.c
    - updated dpll_hw_state correctly
    - Updated commit message and title

v3: Address review comments by Imre
    - Proper masking of P1, M1 fields while computing divisors
    - assert in case of bpp mismatch
    - guard for divide by 0 while computing pclk
    - Use ARRAY_SIZE instead of direct calculation
Signed-off-by: default avatarShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: default avatarImre Deak <imre.deak@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent aba86890
......@@ -6161,6 +6161,10 @@ static void vlv_crtc_clock_get(struct intel_crtc *crtc,
u32 mdiv;
int refclk = 100000;
/* In case of MIPI DPLL will not even be used */
if (!(pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE))
return;
mutex_lock(&dev_priv->dpio_lock);
mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
mutex_unlock(&dev_priv->dpio_lock);
......
......@@ -92,6 +92,9 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
if (fixed_mode)
intel_fixed_panel_mode(fixed_mode, adjusted_mode);
/* DSI uses short packets for sync events, so clear mode flags for DSI */
adjusted_mode->flags = 0;
if (intel_dsi->dev.dev_ops->mode_fixup)
return intel_dsi->dev.dev_ops->mode_fixup(&intel_dsi->dev,
mode, adjusted_mode);
......@@ -179,6 +182,10 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
tmp |= DPLL_REFA_CLK_ENABLE_VLV;
I915_WRITE(DPLL(pipe), tmp);
/* update the hw state for DPLL */
intel_crtc->config.dpll_hw_state.dpll = DPLL_INTEGRATED_CLOCK_VLV |
DPLL_REFA_CLK_ENABLE_VLV;
tmp = I915_READ(DSPCLK_GATE_D);
tmp |= DPOUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(DSPCLK_GATE_D, tmp);
......@@ -359,9 +366,21 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
static void intel_dsi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
u32 pclk;
DRM_DEBUG_KMS("\n");
/* XXX: read flags, set to adjusted_mode */
/*
* DPLL_MD is not used in case of DSI, reading will get some default value
* set dpll_md = 0
*/
pipe_config->dpll_hw_state.dpll_md = 0;
pclk = vlv_get_dsi_pclk(encoder, pipe_config->pipe_bpp);
if (!pclk)
return;
pipe_config->adjusted_mode.crtc_clock = pclk;
pipe_config->port_clock = pclk;
}
static enum drm_mode_status
......
......@@ -132,6 +132,7 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder)
extern void vlv_enable_dsi_pll(struct intel_encoder *encoder);
extern void vlv_disable_dsi_pll(struct intel_encoder *encoder);
extern u32 vlv_get_dsi_pclk(struct intel_encoder *encoder, int pipe_bpp);
extern struct intel_dsi_dev_ops vbt_generic_dsi_display_ops;
......
......@@ -298,3 +298,84 @@ void vlv_disable_dsi_pll(struct intel_encoder *encoder)
mutex_unlock(&dev_priv->dpio_lock);
}
static void assert_bpp_mismatch(int pixel_format, int pipe_bpp)
{
int bpp;
switch (pixel_format) {
default:
case VID_MODE_FORMAT_RGB888:
case VID_MODE_FORMAT_RGB666_LOOSE:
bpp = 24;
break;
case VID_MODE_FORMAT_RGB666:
bpp = 18;
break;
case VID_MODE_FORMAT_RGB565:
bpp = 16;
break;
}
WARN(bpp != pipe_bpp,
"bpp match assertion failure (expected %d, current %d)\n",
bpp, pipe_bpp);
}
u32 vlv_get_dsi_pclk(struct intel_encoder *encoder, int pipe_bpp)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
u32 dsi_clock, pclk;
u32 pll_ctl, pll_div;
u32 m = 0, p = 0;
int refclk = 25000;
int i;
DRM_DEBUG_KMS("\n");
mutex_lock(&dev_priv->dpio_lock);
pll_ctl = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
pll_div = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_DIVIDER);
mutex_unlock(&dev_priv->dpio_lock);
/* mask out other bits and extract the P1 divisor */
pll_ctl &= DSI_PLL_P1_POST_DIV_MASK;
pll_ctl = pll_ctl >> (DSI_PLL_P1_POST_DIV_SHIFT - 2);
/* mask out the other bits and extract the M1 divisor */
pll_div &= DSI_PLL_M1_DIV_MASK;
pll_div = pll_div >> DSI_PLL_M1_DIV_SHIFT;
while (pll_ctl) {
pll_ctl = pll_ctl >> 1;
p++;
}
p--;
if (!p) {
DRM_ERROR("wrong P1 divisor\n");
return 0;
}
for (i = 0; i < ARRAY_SIZE(lfsr_converts); i++) {
if (lfsr_converts[i] == pll_div)
break;
}
if (i == ARRAY_SIZE(lfsr_converts)) {
DRM_ERROR("wrong m_seed programmed\n");
return 0;
}
m = i + 62;
dsi_clock = (m * refclk) / p;
/* pixel_format and pipe_bpp should agree */
assert_bpp_mismatch(intel_dsi->pixel_format, pipe_bpp);
pclk = DIV_ROUND_CLOSEST(dsi_clock * intel_dsi->lane_count, pipe_bpp);
return pclk;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment