drm/amd/display: Update FAMS sequence for DCN30 & DCN32

Provide DCN32 specific sequence and update DCN30 sequence
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dcn32/dcn32_init.c

@@ -60,7 +60,7 @@ static const struct hw_sequencer_funcs dcn32_funcs = {
 	.pipe_control_lock = dcn20_pipe_control_lock,
 	.interdependent_update_lock = dcn10_lock_all_pipes,
 	.cursor_lock = dcn10_cursor_lock,
-	.prepare_bandwidth = dcn30_prepare_bandwidth,
+	.prepare_bandwidth = dcn32_prepare_bandwidth,
 	.optimize_bandwidth = dcn20_optimize_bandwidth,
 	.update_bandwidth = dcn20_update_bandwidth,
 	.set_drr = dcn10_set_drr,

drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c

@@ -993,11 +993,7 @@ void dcn30_set_disp_pattern_generator(const struct dc *dc,
 void dcn30_prepare_bandwidth(struct dc *dc,
 	struct dc_state *context)
 {
-	bool p_state_change_support = context->bw_ctx.bw.dcn.clk.p_state_change_support;
-	/* Any transition into an FPO config should disable MCLK switching first to avoid
-	 * driver and FW P-State synchronization issues.
-	 */
-	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching || dc->clk_mgr->clks.fw_based_mclk_switching) {
+	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching && !dc->clk_mgr->clks.fw_based_mclk_switching) {
 		dc->optimized_required = true;
 		context->bw_ctx.bw.dcn.clk.p_state_change_support = false;
 	}
@@ -1008,20 +1004,9 @@ void dcn30_prepare_bandwidth(struct dc *dc,
 			dc->clk_mgr->funcs->set_max_memclk(dc->clk_mgr, dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz);
 
 	dcn20_prepare_bandwidth(dc, context);
-	/*
-	 * enabled -> enabled: do not disable
-	 * enabled -> disabled: disable
-	 * disabled -> enabled: don't care
-	 * disabled -> disabled: don't care
-	 */
-	if (!context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching)
-		dc_dmub_srv_p_state_delegate(dc, false, context);
 
-	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching || dc->clk_mgr->clks.fw_based_mclk_switching) {
-		/* After disabling P-State, restore the original value to ensure we get the correct P-State
-		 * on the next optimize. */
-		context->bw_ctx.bw.dcn.clk.p_state_change_support = p_state_change_support;
-	}
+	if (!dc->clk_mgr->clks.fw_based_mclk_switching)
+		dc_dmub_srv_p_state_delegate(dc, false, context);
 }
 
 void dcn30_set_static_screen_control(struct pipe_ctx **pipe_ctx,

drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c

@@ -50,6 +50,7 @@
 #include "dce/dmub_hw_lock_mgr.h"
 #include "dcn32/dcn32_resource.h"
 #include "link.h"
+#include "../dcn20/dcn20_hwseq.h"
 
 #define DC_LOGGER_INIT(logger)
 
@@ -1677,3 +1678,33 @@ bool dcn32_is_pipe_topology_transition_seamless(struct dc *dc,
 
 	return is_seamless;
 }
+
+void dcn32_prepare_bandwidth(struct dc *dc,
+	struct dc_state *context)
+{
+	bool p_state_change_support = context->bw_ctx.bw.dcn.clk.p_state_change_support;
+	/* Any transition into an FPO config should disable MCLK switching first to avoid
+	 * driver and FW P-State synchronization issues.
+	 */
+	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching || dc->clk_mgr->clks.fw_based_mclk_switching) {
+		dc->optimized_required = true;
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = false;
+	}
+
+	if (dc->clk_mgr->dc_mode_softmax_enabled)
+		if (dc->clk_mgr->clks.dramclk_khz <= dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000 &&
+				context->bw_ctx.bw.dcn.clk.dramclk_khz > dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000)
+			dc->clk_mgr->funcs->set_max_memclk(dc->clk_mgr, dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz);
+
+	dcn20_prepare_bandwidth(dc, context);
+
+	if (!context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching)
+		dc_dmub_srv_p_state_delegate(dc, false, context);
+
+	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching || dc->clk_mgr->clks.fw_based_mclk_switching) {
+		/* After disabling P-State, restore the original value to ensure we get the correct P-State
+		 * on the next optimize.
+		 */
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = p_state_change_support;
+	}
+}

drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.h

@@ -124,4 +124,7 @@ bool dcn32_is_pipe_topology_transition_seamless(struct dc *dc,
 		const struct dc_state *cur_ctx,
 		const struct dc_state *new_ctx);
 
+void dcn32_prepare_bandwidth(struct dc *dc,
+	struct dc_state *context);
+
 #endif /* __DC_HWSS_DCN32_H__ */