Commit f597d3ad authored by Arun Ramadoss's avatar Arun Ramadoss Committed by David S. Miller

net: dsa: microchip: lan937x: add phylink_mac_link_up support

This patch add support for phylink_mac_link_up. It configures the mac
for the speed, flow control and duplex mode.
Signed-off-by: default avatarArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c14e878d
......@@ -221,6 +221,7 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
.mirror_add = ksz9477_port_mirror_add,
.mirror_del = ksz9477_port_mirror_del,
.get_caps = lan937x_phylink_get_caps,
.phylink_mac_link_up = lan937x_phylink_mac_link_up,
.fdb_dump = ksz9477_fdb_dump,
.fdb_add = ksz9477_fdb_add,
.fdb_del = ksz9477_fdb_del,
......@@ -1340,6 +1341,20 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port)
return dev->dev_ops->max_mtu(dev, port);
}
static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
struct phy_device *phydev, int speed,
int duplex, bool tx_pause, bool rx_pause)
{
struct ksz_device *dev = ds->priv;
if (dev->dev_ops->phylink_mac_link_up)
dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface,
phydev, speed, duplex,
tx_pause, rx_pause);
}
static int ksz_switch_detect(struct ksz_device *dev)
{
u8 id1, id2;
......@@ -1413,6 +1428,7 @@ static const struct dsa_switch_ops ksz_switch_ops = {
.phy_read = ksz_phy_read16,
.phy_write = ksz_phy_write16,
.phylink_get_caps = ksz_phylink_get_caps,
.phylink_mac_link_up = ksz_phylink_mac_link_up,
.phylink_mac_link_down = ksz_mac_link_down,
.port_enable = ksz_enable_port,
.get_strings = ksz_get_strings,
......
......@@ -271,6 +271,11 @@ struct ksz_dev_ops {
int (*max_mtu)(struct ksz_device *dev, int port);
void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
void (*port_init_cnt)(struct ksz_device *dev, int port);
void (*phylink_mac_link_up)(struct ksz_device *dev, int port,
unsigned int mode,
phy_interface_t interface,
struct phy_device *phydev, int speed,
int duplex, bool tx_pause, bool rx_pause);
void (*config_cpu_port)(struct dsa_switch *ds);
int (*enable_stp_addr)(struct ksz_device *dev);
int (*reset)(struct ksz_device *dev);
......
......@@ -17,4 +17,8 @@ void lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val);
int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu);
void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
struct phylink_config *config);
void lan937x_phylink_mac_link_up(struct ksz_device *dev, int port,
unsigned int mode, phy_interface_t interface,
struct phy_device *phydev, int speed,
int duplex, bool tx_pause, bool rx_pause);
#endif
......@@ -312,6 +312,39 @@ int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu)
return 0;
}
static void lan937x_config_interface(struct ksz_device *dev, int port,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
u8 xmii_ctrl0, xmii_ctrl1;
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_0, &xmii_ctrl0);
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &xmii_ctrl1);
xmii_ctrl0 &= ~(PORT_MII_100MBIT | PORT_MII_FULL_DUPLEX |
PORT_MII_TX_FLOW_CTRL | PORT_MII_RX_FLOW_CTRL);
if (speed == SPEED_1000)
xmii_ctrl1 &= ~PORT_MII_NOT_1GBIT;
else
xmii_ctrl1 |= PORT_MII_NOT_1GBIT;
if (speed == SPEED_100)
xmii_ctrl0 |= PORT_MII_100MBIT;
if (duplex)
xmii_ctrl0 |= PORT_MII_FULL_DUPLEX;
if (tx_pause)
xmii_ctrl0 |= PORT_MII_TX_FLOW_CTRL;
if (rx_pause)
xmii_ctrl0 |= PORT_MII_RX_FLOW_CTRL;
ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_0, xmii_ctrl0);
ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, xmii_ctrl1);
}
void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
struct phylink_config *config)
{
......@@ -324,6 +357,19 @@ void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
}
}
void lan937x_phylink_mac_link_up(struct ksz_device *dev, int port,
unsigned int mode, phy_interface_t interface,
struct phy_device *phydev, int speed,
int duplex, bool tx_pause, bool rx_pause)
{
/* Internal PHYs */
if (dev->info->internal_phy[port])
return;
lan937x_config_interface(dev, port, speed, duplex,
tx_pause, rx_pause);
}
int lan937x_setup(struct dsa_switch *ds)
{
struct ksz_device *dev = ds->priv;
......
......@@ -139,6 +139,17 @@
#define PORT_MII_RX_FLOW_CTRL BIT(3)
#define PORT_GRXC_ENABLE BIT(0)
#define REG_PORT_XMII_CTRL_1 0x0301
#define PORT_MII_NOT_1GBIT BIT(6)
#define PORT_MII_SEL_EDGE BIT(5)
#define PORT_RGMII_ID_IG_ENABLE BIT(4)
#define PORT_RGMII_ID_EG_ENABLE BIT(3)
#define PORT_MII_MAC_MODE BIT(2)
#define PORT_MII_SEL_M 0x3
#define PORT_RGMII_SEL 0x0
#define PORT_RMII_SEL 0x1
#define PORT_MII_SEL 0x2
/* 4 - MAC */
#define REG_PORT_MAC_CTRL_0 0x0400
#define PORT_CHECK_LENGTH BIT(2)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment