e1000e: Fix EEE in Sx implementation

This patch implements the EEE in Sx code so that it only applies to parts
that support EEE in Sx (as opposed to all parts that support EEE).
It also uses the existing eee_advert and eee_lp_abiliity to set just the
bits (100/1000) that should be set.
Signed-off-by: Raanan Avargil <raanan.avargil@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -6317,6 +6317,33 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 			return retval;
 	}
 
+	/* Ensure that the appropriate bits are set in LPI_CTRL
+	 * for EEE in Sx
+	 */
+	if ((hw->phy.type >= e1000_phy_i217) &&
+	    adapter->eee_advert && hw->dev_spec.ich8lan.eee_lp_ability) {
+		u16 lpi_ctrl = 0;
+
+		retval = hw->phy.ops.acquire(hw);
+		if (!retval) {
+			retval = e1e_rphy_locked(hw, I82579_LPI_CTRL,
+						 &lpi_ctrl);
+			if (!retval) {
+				if (adapter->eee_advert &
+				    hw->dev_spec.ich8lan.eee_lp_ability &
+				    I82579_EEE_100_SUPPORTED)
+					lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE;
+				if (adapter->eee_advert &
+				    hw->dev_spec.ich8lan.eee_lp_ability &
+				    I82579_EEE_1000_SUPPORTED)
+					lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE;
+
+				retval = e1e_wphy_locked(hw, I82579_LPI_CTRL,
+							 lpi_ctrl);
+			}
+		}
+		hw->phy.ops.release(hw);
+	}
 
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.