Merge tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - remove most of_platform_populate() calls in arch code.  Now the DT
   core code calls it in the default case and platforms only need to
   call it if they have special needs

 - use pr_fmt on all the DT core print statements

 - CoreSight binding doc improvements to block name descriptions

 - add dt_to_config script which can parse dts files and list
   corresponding kernel config options

 - fix memory leak hit with a PowerMac DT

 - correct a bunch of STMicro compatible strings to use the correct
   vendor prefix

 - fix DA9052 PMIC binding doc to match what is actually used in dts
   files

* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
  documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
  xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
  xtensa: Fix build error due to missing include file
  MIPS: ath79: Add missing include file
  Fix spelling errors in Documentation/devicetree
  ARM: dts: fix STMicroelectronics compatible strings
  powerpc/dts: fix STMicroelectronics compatible strings
  Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
  scripts/dtc: dt_to_config - kernel config options for a devicetree
  of: fdt: mark unflattened tree as detached
  of: overlay: add resolver error prints
  coresight: document binding acronyms
  Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
  of: use pr_fmt prefix for all console printing
  of/irq: Mark initialised interrupt controllers as populated
  of: fix memory leak related to safe_name()
  Revert "of/platform: export of_default_bus_match_table"
  of: unittest: use of_platform_default_populate() to populate default bus
  memory: omap-gpmc: use of_platform_default_populate() to populate default bus
  bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
  ...

Documentation/devicetree/bindings/arm/coresight.txt

@@ -12,14 +12,33 @@ its hardware characteristcs.
 
 	* compatible: These have to be supplemented with "arm,primecell" as
 	  drivers are using the AMBA bus interface.  Possible values include:
-		- "arm,coresight-etb10", "arm,primecell";
-		- "arm,coresight-tpiu", "arm,primecell";
-		- "arm,coresight-tmc", "arm,primecell";
-		- "arm,coresight-funnel", "arm,primecell";
-		- "arm,coresight-etm3x", "arm,primecell";
-		- "arm,coresight-etm4x", "arm,primecell";
-		- "qcom,coresight-replicator1x", "arm,primecell";
-		- "arm,coresight-stm", "arm,primecell"; [1]
+		- Embedded Trace Buffer (version 1.0):
+			"arm,coresight-etb10", "arm,primecell";
+
+		- Trace Port Interface Unit:
+			"arm,coresight-tpiu", "arm,primecell";
+
+		- Trace Memory Controller, used for Embedded Trace Buffer(ETB),
+		  Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR)
+		  configuration.  The configuration mode (ETB, ETF, ETR) is
+		  discovered at boot time when the device is probed.
+			"arm,coresight-tmc", "arm,primecell";
+
+		- Trace Funnel:
+			"arm,coresight-funnel", "arm,primecell";
+
+		- Embedded Trace Macrocell (version 3.x) and
+					Program Flow Trace Macrocell:
+			"arm,coresight-etm3x", "arm,primecell";
+
+		- Embedded Trace Macrocell (version 4.x):
+			"arm,coresight-etm4x", "arm,primecell";
+
+		- Qualcomm Configurable Replicator (version 1.x):
+			"qcom,coresight-replicator1x", "arm,primecell";
+
+		- System Trace Macrocell:
+			"arm,coresight-stm", "arm,primecell"; [1]
 
 	* reg: physical base address and length of the register
 	  set(s) of the component.

Documentation/devicetree/bindings/arm/l2c2x0.txt

@@ -86,10 +86,10 @@ Optional properties:
   firmware)
 - arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly
   disable), <1> (forcibly enable), property absent (OS specific behavior,
-  preferrably retain firmware settings)
+  preferably retain firmware settings)
 - arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable),
   <1> (forcibly enable), property absent (OS specific behavior,
-  preferrably retain firmware settings)
+  preferably retain firmware settings)
 
 Example:
 

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -146,10 +146,10 @@ samsung,24ad0xd1	S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
 sgx,vz89x		SGX Sensortech VZ89X Sensors
 sii,s35390a		2-wire CMOS real-time clock
 skyworks,sky81452	Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
-st-micro,24c256		i2c serial eeprom  (24cxx)
-stm,m41t00		Serial Access TIMEKEEPER
-stm,m41t62		Serial real-time clock (RTC) with alarm
-stm,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
+st,24c256		i2c serial eeprom  (24cxx)
+st,m41t00		Serial real-time clock (RTC)
+st,m41t62		Serial real-time clock (RTC) with alarm
+st,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
 taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
 ti,ads7828		8-Channels, 12-bit ADC
 ti,ads7830		8-Channels, 8-bit ADC

Documentation/devicetree/bindings/mfd/da9052-i2c.txt

@@ -8,10 +8,13 @@ Sub-nodes:
 - regulators : Contain the regulator nodes. The DA9052/53 regulators are
   bound using their names as listed below:
 
-    buck0     : regulator BUCK0
-    buck1     : regulator BUCK1
-    buck2     : regulator BUCK2
-    buck3     : regulator BUCK3
+    buck1     : regulator BUCK CORE
+    buck2     : regulator BUCK PRO
+    buck3     : regulator BUCK MEM
+    buck4     : regulator BUCK PERI
+    ldo1      : regulator LDO1
+    ldo2      : regulator LDO2
+    ldo3      : regulator LDO3
     ldo4      : regulator LDO4
     ldo5      : regulator LDO5
     ldo6      : regulator LDO6
@@ -19,9 +22,6 @@ Sub-nodes:
     ldo8      : regulator LDO8
     ldo9      : regulator LDO9
     ldo10     : regulator LDO10
-    ldo11     : regulator LDO11
-    ldo12     : regulator LDO12
-    ldo13     : regulator LDO13
 
   The bindings details of individual regulator device can be found in:
   Documentation/devicetree/bindings/regulator/regulator.txt
@@ -36,22 +36,22 @@ i2c@63fc8000 { /* I2C1 */
 		reg = <0x48>;
 
 		regulators {
-			buck0 {
+			buck1 {
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2075000>;
 			};
 
-			buck1 {
+			buck2 {
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2075000>;
 			};
 
-			buck2 {
+			buck3 {
 				regulator-min-microvolt = <925000>;
 				regulator-max-microvolt = <2500000>;
 			};
 
-			buck3 {
+			buck4 {
 				regulator-min-microvolt = <925000>;
 				regulator-max-microvolt = <2500000>;
 			};

Documentation/devicetree/bindings/net/cavium-pip.txt

@@ -37,6 +37,12 @@ Properties for PIP port which is a child the PIP interface:
 
 - phy-handle: Optional, see ethernet.txt file in the same directory.
 
+- rx-delay: Delay value for RGMII receive clock. Optional. Disabled if 0.
+  Value range is 1-31, and mapping to the actual delay varies depending on HW.
+
+- tx-delay: Delay value for RGMII transmit clock. Optional. Disabled if 0.
+  Value range is 1-31, and mapping to the actual delay varies depending on HW.
+
 Example:
 
 	pip@11800a0000000 {

Documentation/devicetree/bindings/net/dsa/dsa.txt

@@ -317,7 +317,7 @@ Each port children node must have the following mandatory properties:
 Note that a port labelled "dsa" will imply checking for the uplink phandle
 described below.
 
-Optionnal property:
+Optional property:
 - link			: Should be a list of phandles to another switch's DSA port.
 			  This property is only used when switches are being
 			  chained/cascaded together. This port is used as outgoing port

Documentation/devicetree/bindings/powerpc/fsl/fman.txt

@@ -35,7 +35,7 @@ PROPERTIES
 		Definition: Specifies the index of the FMan unit.
 
 		The cell-index value may be used by the SoC, to identify the
-		FMan unit in the SoC memory map. In the table bellow,
+		FMan unit in the SoC memory map. In the table below,
 		there's a description of the cell-index use in each SoC:
 
 		- P1023:
@@ -247,7 +247,7 @@ PROPERTIES
 
 		The cell-index value may be used by the FMan or the SoC, to
 		identify the MAC unit in the FMan (or SoC) memory map.
-		In the tables bellow there's a description of the cell-index
+		In the tables below there's a description of the cell-index
 		use, there are two tables, one describes the use of cell-index
 		by the FMan, the second describes the use by the SoC:
 

Documentation/devicetree/bindings/regmap/regmap.txt

@@ -14,7 +14,7 @@ architectures that typically run big-endian operating systems
 be marked that way in the devicetree.
 
 On SoCs that can be operated in both big-endian and little-endian
-modes, with a single hardware switch controlling both the endianess
+modes, with a single hardware switch controlling both the endianness
 of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
 chips), "native-endian" is used to allow using the same device tree
 blob in both cases.

Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt

@@ -28,10 +28,10 @@ Optional properties:
 - dma-names: Should contain "tx" for transmit and "rx" for receive channels
 - qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be
            used with TX DMA channel. Required when using DMA for transmission
-           with UARTDM v1.3 and bellow.
+           with UARTDM v1.3 and below.
 - qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be
            used with RX DMA channel. Required when using DMA for reception
-           with UARTDM v1.3 and bellow.
+           with UARTDM v1.3 and below.
 
 Note: Aliases may be defined to ensure the correct ordering of the UARTs.
 The alias serialN will result in the UART being assigned port N.  If any

Documentation/devicetree/bindings/sound/simple-card.txt

@@ -30,7 +30,7 @@ Optional subnodes:
 					  sub-nodes. This container may be
 					  omitted when the card has only one
 					  DAI link. See the examples and the
-					  section bellow.
+					  section below.
 
 Dai-link subnode properties and subnodes:
 

Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt

@@ -9,7 +9,7 @@ Required properties:
 		one)
 - clocks: phandle to the source clock (usually the AHB clock)
 
-Optionnal properties:
+Optional properties:
 - resets: phandle to a reset controller asserting the timer
 
 Example:

arch/arc/kernel/setup.c

@@ -15,7 +15,6 @@
 #include <linux/cpu.h>
 #include <linux/of_fdt.h>
 #include <linux/of.h>
-#include <linux/of_platform.h>
 #include <linux/cache.h>
 #include <asm/sections.h>
 #include <asm/arcregs.h>
@@ -436,12 +435,6 @@ void __init setup_arch(char **cmdline_p)
 
 static int __init customize_machine(void)
 {
-	/*
-	 * Traverses flattened DeviceTree - registering platform devices
-	 * (if any) complete with their resources
-	 */
-	of_platform_default_populate(NULL, NULL, NULL);
-
 	if (machine_desc->init_machine)
 		machine_desc->init_machine();
 

arch/arm/boot/dts/imx28-m28.dtsi

@@ -37,7 +37,7 @@ i2c0: i2c@80058000 {
 				status = "okay";
 
 				rtc: rtc@68 {
-					compatible = "stm,m41t62";
+					compatible = "st,m41t62";
 					reg = <0x68>;
 				};
 			};

arch/arm/boot/dts/imx51-ts4800.dts

@@ -102,7 +102,7 @@ &i2c2 {
 	status = "okay";
 
 	rtc: m41t00@68 {
-		compatible = "stm,m41t00";
+		compatible = "st,m41t00";
 		reg = <0x68>;
 	};
 };

arch/arm/boot/dts/imx53-m53.dtsi

@@ -84,7 +84,7 @@ eeprom: eeprom@50 {
 	};
 
 	rtc: rtc@68 {
-		compatible = "stm,m41t62";
+		compatible = "st,m41t62";
 		reg = <0x68>;
 	};
 };

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -282,7 +282,7 @@ temp2: ad7414@4d {
 	};
 
 	rtc: m41t62@68 {
-		compatible = "stm,m41t62";
+		compatible = "st,m41t62";
 		reg = <0x68>;
 	};
 };

arch/arm/boot/dts/socfpga_cyclone5_socrates.dts

@@ -52,7 +52,7 @@ &i2c0 {
 	status = "okay";
 
 	rtc: rtc@68 {
-		compatible = "stm,m41t82";
+		compatible = "st,m41t82";
 		reg = <0x68>;
 	};
 };

arch/arm/kernel/setup.c

@@ -19,7 +19,6 @@
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
 #include <linux/screen_info.h>
-#include <linux/of_iommu.h>
 #include <linux/of_platform.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
@@ -903,14 +902,9 @@ static int __init customize_machine(void)
 	 * machine from the device tree, if no callback is provided,
 	 * otherwise we would always need an init_machine callback.
 	 */
-	of_iommu_init();
 	if (machine_desc->init_machine)
 		machine_desc->init_machine();
-#ifdef CONFIG_OF
-	else
-		of_platform_populate(NULL, of_default_bus_match_table,
-					NULL, NULL);
-#endif
+
 	return 0;
 }
 arch_initcall(customize_machine);

arch/arm/mach-artpec/board-artpec6.c

@@ -13,7 +13,6 @@
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/mfd/syscon.h>
-#include <linux/of_platform.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/clk-provider.h>
@@ -44,8 +43,6 @@ static void __init artpec6_init_machine(void)
 		regmap_write(regmap, ARTPEC6_DMACFG_REGNUM,
 			     ARTPEC6_DMACFG_UARTS_BURST);
 	};
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg)

arch/arm/mach-at91/at91rm9200.c

@@ -30,7 +30,7 @@ static void __init at91rm9200_dt_device_init(void)
 	if (soc != NULL)
 		soc_dev = soc_device_to_device(soc);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+	of_platform_default_populate(NULL, NULL, soc_dev);
 
 	at91rm9200_pm_init();
 }

arch/arm/mach-at91/at91sam9.c

@@ -61,7 +61,7 @@ static void __init at91sam9_common_init(void)
 	if (soc != NULL)
 		soc_dev = soc_device_to_device(soc);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+	of_platform_default_populate(NULL, NULL, soc_dev);
 }
 
 static void __init at91sam9_dt_device_init(void)

arch/arm/mach-at91/sama5.c

@@ -68,7 +68,7 @@ static void __init sama5_dt_device_init(void)
 	if (soc != NULL)
 		soc_dev = soc_device_to_device(soc);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+	of_platform_default_populate(NULL, NULL, soc_dev);
 	sama5_pm_init();
 }
 

arch/arm/mach-bcm/board_bcm21664.c

@@ -12,7 +12,6 @@
  */
 
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -60,7 +59,6 @@ static void bcm21664_restart(enum reboot_mode mode, const char *cmd)
 
 static void __init bcm21664_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	kona_l2_cache_init();
 }
 

arch/arm/mach-bcm/board_bcm281xx.c

@@ -13,7 +13,6 @@
 
 #include <linux/clocksource.h>
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
 
@@ -58,7 +57,6 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
 
 static void __init bcm281xx_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	kona_l2_cache_init();
 }
 

arch/arm/mach-bcm/board_bcm2835.c

@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 #include <linux/clk/bcm2835.h>
 
 #include <asm/mach/arch.h>
@@ -23,16 +22,7 @@
 
 static void __init bcm2835_init(void)
 {
-	int ret;
-
 	bcm2835_init_clocks();
-
-	ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
-				   NULL);
-	if (ret) {
-		pr_err("of_platform_populate failed: %d\n", ret);
-		BUG();
-	}
 }
 
 static const char * const bcm2835_compat[] = {

arch/arm/mach-cns3xxx/core.c

@@ -395,8 +395,7 @@ static void __init cns3xxx_init(void)
 
 	pm_power_off = cns3xxx_power_off;
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-                        cns3xxx_auxdata, NULL);
+	of_platform_default_populate(NULL, cns3xxx_auxdata, NULL);
 }
 
 static const char *const cns3xxx_dt_compat[] __initconst = {

arch/arm/mach-exynos/exynos.c

@@ -14,7 +14,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/irqchip.h>
 #include <linux/soc/samsung/exynos-regs-pmu.h>
@@ -217,8 +216,6 @@ static void __init exynos_dt_machine_init(void)
 	    of_machine_is_compatible("samsung,exynos3250") ||
 	    of_machine_is_compatible("samsung,exynos5250"))
 		platform_device_register(&exynos_cpuidle);
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static char const *const exynos_dt_compat[] __initconst = {

arch/arm/mach-highbank/highbank.c

@@ -23,7 +23,6 @@
 #include <linux/pl320-ipc.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/reboot.h>
 #include <linux/amba/bus.h>
@@ -163,8 +162,6 @@ static void __init highbank_init(void)
 
 	pl320_ipc_register_notifier(&hb_keys_nb);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
 	if (psci_ops.cpu_suspend)
 		platform_device_register(&highbank_cpuidle_device);
 }

arch/arm/mach-imx/mach-imx51.c

@@ -52,8 +52,6 @@ static void __init imx51_dt_init(void)
 {
 	imx51_ipu_mipi_setup();
 	imx_src_init();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static void __init imx51_init_late(void)

arch/arm/mach-imx/mach-imx53.c

@@ -32,8 +32,6 @@ static void __init imx53_dt_init(void)
 {
 	imx_src_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
 	imx_aips_allow_unprivileged_access("fsl,imx53-aipstz");
 }
 

arch/arm/mach-imx/mach-imx6q.c

@@ -278,7 +278,7 @@ static void __init imx6q_init_machine(void)
 
 	imx6q_enet_phy_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 
 	imx_anatop_init();
 	cpu_is_imx6q() ?  imx6q_pm_init() : imx6dl_pm_init();

arch/arm/mach-imx/mach-imx6sl.c

@@ -52,7 +52,7 @@ static void __init imx6sl_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 
 	imx6sl_fec_init();
 	imx_anatop_init();

arch/arm/mach-imx/mach-imx6sx.c

@@ -72,7 +72,7 @@ static void __init imx6sx_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 
 	imx6sx_enet_init();
 	imx_anatop_init();

arch/arm/mach-imx/mach-imx6ul.c

@@ -64,7 +64,6 @@ static void __init imx6ul_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();

arch/arm/mach-imx/mach-imx7d.c

@@ -93,7 +93,6 @@ static void __init imx7d_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	imx_anatop_init();
 	imx7d_enet_init();
 }

arch/arm/mach-integrator/integrator_ap.c

@@ -240,8 +240,7 @@ static void __init ap_init_of(void)
 	if (!ebi_base)
 		return;
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			ap_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, ap_auxdata_lookup, NULL);
 
 	sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
 	for (i = 0; i < 4; i++) {

arch/arm/mach-integrator/integrator_cp.c

@@ -231,8 +231,7 @@ static void __init intcp_init_of(void)
 	if (!intcp_con_base)
 		return;
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     intcp_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, intcp_auxdata_lookup, NULL);
 }
 
 static const char * intcp_dt_board_compat[] = {

arch/arm/mach-keystone/keystone.c

@@ -60,7 +60,6 @@ static void __init keystone_init(void)
 		bus_register_notifier(&platform_bus_type, &platform_nb);
 	}
 	keystone_pm_runtime_init();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static long long __init keystone_pv_fixup(void)

arch/arm/mach-lpc32xx/phy3250.c

@@ -191,8 +191,7 @@ static void __init lpc3250_machine_init(void)
 		LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
 		LPC32XX_CLKPWR_TEST_CLK_SEL);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     lpc32xx_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, lpc32xx_auxdata_lookup, NULL);
 }
 
 static const char *const lpc32xx_dt_compat[] __initconst = {

arch/arm/mach-mvebu/board-v7.c

@@ -16,7 +16,6 @@
 #include <linux/init.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/io.h>
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
@@ -144,8 +143,6 @@ static void __init mvebu_dt_init(void)
 {
 	if (of_machine_is_compatible("marvell,armadaxp"))
 		i2c_quirk();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const armada_370_xp_dt_compat[] __initconst = {

arch/arm/mach-mvebu/dove.c

@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/of.h>
-#include <linux/of_platform.h>
 #include <linux/soc/dove/pmu.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
@@ -26,7 +25,6 @@ static void __init dove_init(void)
 #endif
 	BUG_ON(mvebu_mbus_dt_init(false));
 	dove_init_pmu();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const dove_dt_compat[] __initconst = {

arch/arm/mach-mvebu/kirkwood.c

@@ -179,7 +179,7 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_pm_init();
 	kirkwood_dt_eth_fixup();
 
-	of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
+	of_platform_default_populate(NULL, auxdata, NULL);
 }
 
 static const char * const kirkwood_dt_board_compat[] __initconst = {

arch/arm/mach-mxs/mach-mxs.c

@@ -498,8 +498,7 @@ static void __init mxs_machine_init(void)
 	else if (of_machine_is_compatible("msr,m28cu3"))
 		m28cu3_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 
 	mxs_restart_init();
 

arch/arm/mach-nspire/nspire.c

@@ -57,8 +57,7 @@ static struct of_dev_auxdata nspire_auxdata[] __initdata = {
 
 static void __init nspire_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-			nspire_auxdata, NULL);
+	of_platform_default_populate(NULL, nspire_auxdata, NULL);
 }
 
 static void nspire_restart(enum reboot_mode mode, const char *cmd)

arch/arm/mach-orion5x/board-dt.c

@@ -63,8 +63,7 @@ static void __init orion5x_dt_init(void)
 	if (of_machine_is_compatible("maxtor,shared-storage-2"))
 		mss2_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     orion5x_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL);
 }
 
 static const char *orion5x_dt_compat[] = {

arch/arm/mach-picoxcell/common.c

@@ -10,7 +10,6 @@
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 #include <linux/reboot.h>
 
 #include <asm/mach/arch.h>
@@ -54,7 +53,6 @@ static void __init picoxcell_map_io(void)
 
 static void __init picoxcell_init_machine(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	picoxcell_setup_restart();
 }
 

arch/arm/mach-rockchip/rockchip.c

@@ -73,7 +73,6 @@ static void __init rockchip_timer_init(void)
 static void __init rockchip_dt_init(void)
 {
 	rockchip_suspend_init();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const rockchip_board_dt_compat[] = {

arch/arm/mach-s3c24xx/mach-s3c2416-dt.c

@@ -17,7 +17,6 @@
 
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
-#include <linux/of_platform.h>
 #include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
@@ -35,7 +34,6 @@ static void __init s3c2416_dt_map_io(void)
 
 static void __init s3c2416_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	s3c_pm_init();
 }
 

arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c

@@ -8,8 +8,6 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/of_platform.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
@@ -48,7 +46,6 @@ static void __init s3c64xx_dt_map_io(void)
 static void __init s3c64xx_dt_init_machine(void)
 {
 	samsung_wdt_reset_of_init();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -18,7 +18,6 @@
 #include <linux/io.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
-#include <linux/of_platform.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -77,8 +76,6 @@ static void __init r8a7740_init_irq_of(void)
 static void __init r8a7740_generic_init(void)
 {
 	r8a7740_meram_workaround();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *const r8a7740_boards_compat_dt[] __initconst = {

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -18,7 +18,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/io.h>
@@ -55,7 +54,6 @@ static void __init sh73a0_generic_init(void)
 	/* Shared attribute override enable, 64K*8way */
 	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
 #endif
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *const sh73a0_boards_compat_dt[] __initconst = {

arch/arm/mach-spear/spear1310.c

@@ -14,7 +14,6 @@
 #define pr_fmt(fmt) "SPEAr1310: " fmt
 
 #include <linux/amba/pl022.h>
-#include <linux/of_platform.h>
 #include <linux/pata_arasan_cf_data.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -27,7 +26,6 @@
 
 static void __init spear1310_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
 }
 

arch/arm/mach-spear/spear1340.c

@@ -19,7 +19,6 @@
 
 static void __init spear1340_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
 }
 

arch/arm/mach-spear/spear300.c

@@ -194,8 +194,7 @@ static void __init spear300_dt_init(void)
 	pl080_plat_data.slave_channels = spear300_dma_info;
 	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			spear300_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, spear300_auxdata_lookup, NULL);
 }
 
 static const char * const spear300_dt_board_compat[] = {

arch/arm/mach-spear/spear310.c

@@ -236,8 +236,7 @@ static void __init spear310_dt_init(void)
 	pl080_plat_data.slave_channels = spear310_dma_info;
 	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			spear310_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, spear310_auxdata_lookup, NULL);
 }
 
 static const char * const spear310_dt_board_compat[] = {

arch/arm/mach-spear/spear320.c

@@ -240,8 +240,7 @@ static void __init spear320_dt_init(void)
 	pl080_plat_data.slave_channels = spear320_dma_info;
 	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			spear320_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, spear320_auxdata_lookup, NULL);
 }
 
 static const char * const spear320_dt_board_compat[] = {

arch/arm/mach-spear/spear6xx.c

@@ -411,8 +411,7 @@ struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
 
 static void __init spear600_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-			spear6xx_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, spear6xx_auxdata_lookup, NULL);
 }
 
 static const char *spear600_dt_board_compat[] = {

arch/arm/mach-tegra/tegra.c

@@ -115,7 +115,7 @@ static void __init tegra_dt_init(void)
 	 * devices
 	 */
 out:
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 }
 
 static void __init paz00_init(void)

arch/arm/mach-u300/core.c

@@ -391,8 +391,7 @@ static void __init u300_init_machine_dt(void)
 	pinctrl_register_mappings(u300_pinmux_map,
 				  ARRAY_SIZE(u300_pinmux_map));
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			u300_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, u300_auxdata_lookup, NULL);
 
 	/* Enable SEMI self refresh */
 	val = readw(syscon_base + U300_SYSCON_SMCR) |

arch/arm/mach-versatile/versatile_dt.c

@@ -344,8 +344,7 @@ static void __init versatile_dt_init(void)
 
 	versatile_dt_pci_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     versatile_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, versatile_auxdata_lookup, NULL);
 }
 
 static const char *const versatile_dt_match[] __initconst = {

arch/arm/mach-vt8500/vt8500.c

@@ -30,7 +30,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #define LEGACY_GPIO_BASE	0xD8110000
 #define LEGACY_PMC_BASE		0xD8130000
@@ -158,8 +157,6 @@ static void __init vt8500_init(void)
 		pm_power_off = &vt8500_power_off;
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const vt8500_dt_compat[] = {

arch/arm/mach-zynq/common.c

@@ -141,7 +141,7 @@ static void __init zynq_init_machine(void)
 	 * Finished with the static registrations now; fill in the missing
 	 * devices
 	 */
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 
 	platform_device_register(&zynq_cpuidle_device);
 }

arch/arm64/kernel/setup.c

@@ -39,9 +39,7 @@
 #include <linux/fs.h>
 #include <linux/proc_fs.h>
 #include <linux/memblock.h>
-#include <linux/of_iommu.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/efi.h>
 #include <linux/psci.h>
 
@@ -303,19 +301,6 @@ void __init setup_arch(char **cmdline_p)
 	}
 }
 
-static int __init arm64_device_init(void)
-{
-	if (of_have_populated_dt()) {
-		of_iommu_init();
-		of_platform_populate(NULL, of_default_bus_match_table,
-				     NULL, NULL);
-	} else if (acpi_disabled) {
-		pr_crit("Device tree not populated\n");
-	}
-	return 0;
-}
-arch_initcall_sync(arm64_device_init);
-
 static int __init topology_init(void)
 {
 	int i;

arch/c6x/platforms/Makefile

@@ -4,7 +4,7 @@
 # Copyright 2010, 2011 Texas Instruments Incorporated
 #
 
-obj-y = platform.o cache.o megamod-pic.o pll.o plldata.o timer64.o
+obj-y = cache.o megamod-pic.o pll.o plldata.o timer64.o
 obj-y += dscr.o
 
 # SoC objects

arch/c6x/platforms/platform.c

-/*
- * Copyright 2011 Texas Instruments Incorporated
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-static int __init c6x_device_probe(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	return 0;
-}
-core_initcall(c6x_device_probe);

arch/cris/kernel/setup.c

@@ -21,7 +21,6 @@
 #include <linux/cpu.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <asm/setup.h>
 #include <arch/system.h>
 
@@ -212,10 +211,3 @@ static int __init topology_init(void)
 }
 
 subsys_initcall(topology_init);
-
-static int __init cris_of_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	return 0;
-}
-core_initcall(cris_of_init);

arch/metag/kernel/setup.c

@@ -20,7 +20,6 @@
 #include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/pfn.h>
 #include <linux/root_dev.h>
 #include <linux/sched.h>
@@ -414,9 +413,7 @@ static int __init customize_machine(void)
 	/* customizes platform devices, or adds new ones */
 	if (machine_desc->init_machine)
 		machine_desc->init_machine();
-	else
-		of_platform_populate(NULL, of_default_bus_match_table, NULL,
-				     NULL);
+
 	return 0;
 }
 arch_initcall(customize_machine);

arch/mips/ath79/setup.c

@@ -18,7 +18,6 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
-#include <linux/of_platform.h>
 #include <linux/of_fdt.h>
 
 #include <asm/bootinfo.h>
@@ -285,7 +284,6 @@ void __init plat_time_init(void)
 
 static int __init ath79_setup(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	if  (mips_machtype == ATH79_MACH_GENERIC_OF)
 		return 0;
 

arch/mips/jz4740/setup.c

@@ -20,7 +20,6 @@
 #include <linux/kernel.h>
 #include <linux/libfdt.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 
 #include <asm/bootinfo.h>
 #include <asm/prom.h>
@@ -74,13 +73,6 @@ void __init device_tree_init(void)
 	unflatten_and_copy_device_tree();
 }
 
-static int __init populate_machine(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	return 0;
-}
-arch_initcall(populate_machine);
-
 const char *get_system_type(void)
 {
 	if (config_enabled(CONFIG_MACH_JZ4780))

arch/mips/mti-sead3/sead3-setup.c

@@ -8,7 +8,6 @@
  */
 #include <linux/init.h>
 #include <linux/libfdt.h>
-#include <linux/of_platform.h>
 #include <linux/of_fdt.h>
 
 #include <asm/prom.h>
@@ -107,10 +106,3 @@ void __init device_tree_init(void)
 
 	unflatten_and_copy_device_tree();
 }
-
-static int __init customize_machine(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	return 0;
-}
-arch_initcall(customize_machine);

arch/mips/pic32/pic32mzda/init.c

@@ -147,8 +147,7 @@ static int __init plat_of_setup(void)
 		panic("Device tree not present");
 
 	pic32_of_prepare_platform_data(pic32_auxdata_lookup);
-	if (of_platform_populate(NULL, of_default_bus_match_table,
-				 pic32_auxdata_lookup, NULL))
+	if (of_platform_default_populate(NULL, pic32_auxdata_lookup, NULL))
 		panic("Failed to populate DT");
 
 	return 0;

arch/mips/pistachio/init.c

@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 
 #include <asm/cacheflush.h>
 #include <asm/dma-coherence.h>
@@ -159,15 +158,3 @@ void __init device_tree_init(void)
 
 	unflatten_and_copy_device_tree();
 }
-
-static int __init plat_of_setup(void)
-{
-	if (!of_have_populated_dt())
-		panic("Device tree not present");
-
-	if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
-		panic("Failed to populate DT");
-
-	return 0;
-}
-arch_initcall(plat_of_setup);

arch/mips/xilfpga/init.c

@@ -10,7 +10,6 @@
  */
 
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 
 #include <asm/prom.h>
 
@@ -43,15 +42,3 @@ void __init device_tree_init(void)
 
 	unflatten_and_copy_device_tree();
 }
-
-static int __init plat_of_setup(void)
-{
-	if (!of_have_populated_dt())
-		panic("Device tree not present");
-
-	if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
-		panic("Failed to populate DT");
-
-	return 0;
-}
-arch_initcall(plat_of_setup);

arch/nios2/platform/platform.c

@@ -9,7 +9,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
 #include <linux/err.h>
@@ -39,8 +38,7 @@ static int __init nios2_soc_device_init(void)
 		}
 	}
 
-	return of_platform_populate(NULL, of_default_bus_match_table,
-		NULL, NULL);
+	return 0;
 }
 
 device_initcall(nios2_soc_device_init);

arch/powerpc/boot/dts/ac14xx.dts

@@ -231,7 +231,7 @@ at24@57 {
 			};
 
 			rtc@68 {
-				compatible = "stm,m41t00";
+				compatible = "st,m41t00";
 				reg = <0x68>;
 			};
 		};

arch/powerpc/boot/dts/akebono.dts

@@ -224,7 +224,7 @@ IIC0: i2c@00000000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				rtc@68 {
-					compatible = "stm,m41t80", "m41st85";
+					compatible = "st,m41t80", "m41st85";
 					reg = <0x68>;
 				};
 			};

arch/powerpc/boot/dts/bluestone.dts

@@ -279,7 +279,7 @@ IIC0: i2c@ef600700 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				rtc@68 {
-					compatible = "stm,m41t80";
+					compatible = "st,m41t80";
 					reg = <0x68>;
 					interrupt-parent = <&UIC0>;
 					interrupts = <0x9 0x8>;

arch/powerpc/boot/dts/canyonlands.dts

@@ -319,7 +319,7 @@ IIC0: i2c@ef600700 {
 				#address-cells = <1>;
 				#size-cells = <0>;
                                 rtc@68 {
-                                        compatible = "stm,m41t80";
+                                        compatible = "st,m41t80";
                                         reg = <0x68>;
 					interrupt-parent = <&UIC2>;
 					interrupts = <0x19 0x8>;

arch/powerpc/boot/dts/currituck.dts

@@ -116,7 +116,7 @@ IIC0: i2c@00000000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
                                 rtc@68 {
-                                        compatible = "stm,m41t80", "m41st85";
+                                        compatible = "st,m41t80", "m41st85";
                                         reg = <0x68>;
                                 };
 			};

arch/powerpc/boot/dts/fsl/mpc8569mds.dts

@@ -232,7 +232,7 @@ spi@4c0 {
 			mode = "cpu-qe";
 
 			serial-flash@0 {
-				compatible = "stm,m25p40";
+				compatible = "st,m25p40";
 				reg = <0>;
 				spi-max-frequency = <25000000>;
 			};

arch/powerpc/boot/dts/fsl/p1022rdk.dts

@@ -57,7 +57,7 @@ wm8960:codec@1a {
 				clock-frequency = <12288000>;
 			};
 			rtc@68 {
-				compatible = "stm,m41t62";
+				compatible = "st,m41t62";
 				reg = <0x68>;
 			};
 			adt7461@4c{

arch/powerpc/boot/dts/glacier.dts

@@ -287,7 +287,7 @@ IIC0: i2c@ef600700 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				rtc@68 {
-					compatible = "stm,m41t80";
+					compatible = "st,m41t80";
 					reg = <0x68>;
 					interrupt-parent = <&UIC2>;
 					interrupts = <0x19 0x8>;

arch/powerpc/boot/dts/icon.dts

@@ -256,7 +256,7 @@ IIC1: i2c@f0000500 {
 				#size-cells = <0>;
 
                                 rtc@68 {
-                                        compatible = "stm,m41t00";
+                                        compatible = "st,m41t00";
                                         reg = <0x68>;
                                 };
 			};

arch/powerpc/boot/dts/mpc5121ads.dts

@@ -99,7 +99,7 @@ eeprom@50 {
 			};
 
 			rtc@68 {
-				compatible = "stm,m41t62";
+				compatible = "st,m41t62";
 				reg = <0x68>;
 			};
 		};

arch/powerpc/boot/dts/mpc8349emitx.dts

@@ -92,7 +92,7 @@ i2c@3000 {
 			dfsrr;
 
 			eeprom: at24@50 {
-				compatible = "st-micro,24c256";
+				compatible = "st,24c256";
 				reg = <0x50>;
 			};
 

arch/powerpc/boot/dts/mpc836x_rdk.dts

@@ -416,7 +416,7 @@ upm@1,0 {
 			gpios = <&qe_pio_e 18 0>;
 
 			flash {
-				compatible = "stm,nand512-a";
+				compatible = "st,nand512-a";
 			};
 		};
 

arch/powerpc/boot/dts/pdm360ng.dts

@@ -103,7 +103,7 @@ eeprom@50 {
 			};
 
 			rtc@68 {
-				compatible = "stm,m41t00";
+				compatible = "st,m41t00";
 				reg = <0x68>;
 			};
 		};

arch/powerpc/boot/dts/sam440ep.dts

@@ -196,7 +196,7 @@ IIC0: i2c@ef600700 {
 				interrupt-parent = <&UIC0>;
 				interrupts = <2 4>;
 				rtc@68 {
-					compatible = "stm,m41t80";
+					compatible = "st,m41t80";
 					reg = <0x68>;
 				};
 			};

arch/powerpc/boot/dts/xcalibur1501.dts

@@ -238,7 +238,7 @@ eeprom@54 {
 			};
 
 			rtc@68 {
-				compatible = "stm,m41t00",
+				compatible = "st,m41t00",
 				             "dallas,ds1338";
 				reg = <0x68>;
 			};

arch/powerpc/boot/dts/xpedite5200.dts

@@ -130,7 +130,7 @@ eeprom@50 {
 			};
 
 			rtc@68 {
-				compatible = "stm,m41t00",
+				compatible = "st,m41t00",
 					     "dallas,ds1338";
 				reg = <0x68>;
 			};

arch/powerpc/boot/dts/xpedite5200_xmon.dts

@@ -134,7 +134,7 @@ eeprom@50 {
 			};
 
 			rtc@68 {
-				compatible = "stm,m41t00",
+				compatible = "st,m41t00",
 					     "dallas,ds1338";
 				reg = <0x68>;
 			};

arch/powerpc/boot/dts/xpedite5301.dts

@@ -231,7 +231,7 @@ eeprom@54 {
 			};
 
 			rtc@68 {
-				compatible = "stm,m41t00",
+				compatible = "st,m41t00",
 				             "dallas,ds1338";
 				reg = <0x68>;
 			};

arch/powerpc/boot/dts/xpedite5330.dts

@@ -267,7 +267,7 @@ eeprom@54 {
 			};
 
 			rtc@68 {
-				compatible = "stm,m41t00",
+				compatible = "st,m41t00",
 				             "dallas,ds1338";
 				reg = <0x68>;
 			};

arch/powerpc/boot/dts/xpedite5370.dts

@@ -229,7 +229,7 @@ eeprom@54 {
 			};
 
 			rtc@68 {
-				compatible = "stm,m41t00",
+				compatible = "st,m41t00",
 				             "dallas,ds1338";
 				reg = <0x68>;
 			};

arch/sh/boards/of-generic.c

@@ -9,9 +9,7 @@
  */
 
 #include <linux/of.h>
-#include <linux/of_platform.h>
 #include <linux/of_fdt.h>
-#include <linux/of_iommu.h>
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
 #include <linux/clk-provider.h>
@@ -180,17 +178,3 @@ void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 void __init plat_irq_setup(void)
 {
 }
-
-static int __init sh_of_device_init(void)
-{
-	pr_info("SH generic board support: populating platform devices\n");
-	if (of_have_populated_dt()) {
-		of_iommu_init();
-		of_platform_populate(NULL, of_default_bus_match_table,
-				     NULL, NULL);
-	} else {
-		pr_crit("Device tree not populated\n");
-	}
-	return 0;
-}
-arch_initcall_sync(sh_of_device_init);

arch/xtensa/kernel/setup.c

@@ -24,8 +24,8 @@
 #include <linux/percpu.h>
 #include <linux/clk-provider.h>
 #include <linux/cpu.h>
+#include <linux/of.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 
 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 # include <linux/console.h>
@@ -255,7 +255,6 @@ void __init early_init_devtree(void *params)
 static int __init xtensa_device_probe(void)
 {
 	of_clk_init(NULL);
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	return 0;
 }
 

drivers/bus/imx-weim.c

@@ -163,9 +163,8 @@ static int __init weim_parse_dt(struct platform_device *pdev,
 	}
 
 	if (have_child)
-		ret = of_platform_populate(pdev->dev.of_node,
-				   of_default_bus_match_table,
-				   NULL, &pdev->dev);
+		ret = of_platform_default_populate(pdev->dev.of_node,
+						   NULL, &pdev->dev);
 	if (ret)
 		dev_err(&pdev->dev, "%s fail to create devices.\n",
 			pdev->dev.of_node->full_name);

drivers/bus/uniphier-system-bus.c

@@ -257,8 +257,7 @@ static int uniphier_system_bus_probe(struct platform_device *pdev)
 	uniphier_system_bus_set_reg(priv);
 
 	/* Now, the bus is configured.  Populate platform_devices below it */
-	return of_platform_populate(dev->of_node, of_default_bus_match_table,
-				    NULL, dev);
+	return of_platform_default_populate(dev->of_node, NULL, dev);
 }
 
 static const struct of_device_id uniphier_system_bus_match[] = {

drivers/iommu/of_iommu.c

@@ -174,7 +174,7 @@ const struct iommu_ops *of_iommu_configure(struct device *dev,
 	return NULL;
 }
 
-void __init of_iommu_init(void)
+static int __init of_iommu_init(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match, *matches = &__iommu_of_table;
@@ -186,4 +186,7 @@ void __init of_iommu_init(void)
 			pr_err("Failed to initialise IOMMU %s\n",
 				of_node_full_name(np));
 	}
+
+	return 0;
 }
+postcore_initcall_sync(of_iommu_init);

drivers/memory/omap-gpmc.c

@@ -2134,8 +2134,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	/* is child a common bus? */
 	if (of_match_node(of_default_bus_match_table, child))
 		/* create children and other common bus children */
-		if (of_platform_populate(child, of_default_bus_match_table,
-					 NULL, &pdev->dev))
+		if (of_platform_default_populate(child, NULL, &pdev->dev))
 			goto err_child_fail;
 
 	return 0;

drivers/of/address.c

 
+#define pr_fmt(fmt)	"OF: " fmt
+
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
@@ -24,10 +26,10 @@ static int __of_address_to_resource(struct device_node *dev,
 #ifdef DEBUG
 static void of_dump_addr(const char *s, const __be32 *addr, int na)
 {
-	printk(KERN_DEBUG "%s", s);
+	pr_debug("%s", s);
 	while (na--)
-		printk(" %08x", be32_to_cpu(*(addr++)));
-	printk("\n");
+		pr_cont(" %08x", be32_to_cpu(*(addr++)));
+	pr_cont("\n");
 }
 #else
 static void of_dump_addr(const char *s, const __be32 *addr, int na) { }
@@ -68,7 +70,7 @@ static u64 of_bus_default_map(__be32 *addr, const __be32 *range,
 	s  = of_read_number(range + na + pna, ns);
 	da = of_read_number(addr, na);
 
-	pr_debug("OF: default map, cp=%llx, s=%llx, da=%llx\n",
+	pr_debug("default map, cp=%llx, s=%llx, da=%llx\n",
 		 (unsigned long long)cp, (unsigned long long)s,
 		 (unsigned long long)da);
 
@@ -156,7 +158,7 @@ static u64 of_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns,
 	s  = of_read_number(range + na + pna, ns);
 	da = of_read_number(addr + 1, na - 1);
 
-	pr_debug("OF: PCI map, cp=%llx, s=%llx, da=%llx\n",
+	pr_debug("PCI map, cp=%llx, s=%llx, da=%llx\n",
 		 (unsigned long long)cp, (unsigned long long)s,
 		 (unsigned long long)da);
 
@@ -381,7 +383,7 @@ static u64 of_bus_isa_map(__be32 *addr, const __be32 *range, int na, int ns,
 	s  = of_read_number(range + na + pna, ns);
 	da = of_read_number(addr + 1, na - 1);
 
-	pr_debug("OF: ISA map, cp=%llx, s=%llx, da=%llx\n",
+	pr_debug("ISA map, cp=%llx, s=%llx, da=%llx\n",
 		 (unsigned long long)cp, (unsigned long long)s,
 		 (unsigned long long)da);
 
@@ -504,17 +506,17 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
 	 */
 	ranges = of_get_property(parent, rprop, &rlen);
 	if (ranges == NULL && !of_empty_ranges_quirk(parent)) {
-		pr_debug("OF: no ranges; cannot translate\n");
+		pr_debug("no ranges; cannot translate\n");
 		return 1;
 	}
 	if (ranges == NULL || rlen == 0) {
 		offset = of_read_number(addr, na);
 		memset(addr, 0, pna * 4);
-		pr_debug("OF: empty ranges; 1:1 translation\n");
+		pr_debug("empty ranges; 1:1 translation\n");
 		goto finish;
 	}
 
-	pr_debug("OF: walking ranges...\n");
+	pr_debug("walking ranges...\n");
 
 	/* Now walk through the ranges */
 	rlen /= 4;
@@ -525,14 +527,14 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
 			break;
 	}
 	if (offset == OF_BAD_ADDR) {
-		pr_debug("OF: not found !\n");
+		pr_debug("not found !\n");
 		return 1;
 	}
 	memcpy(addr, ranges + na, 4 * pna);
 
  finish:
-	of_dump_addr("OF: parent translation for:", addr, pna);
-	pr_debug("OF: with offset: %llx\n", (unsigned long long)offset);
+	of_dump_addr("parent translation for:", addr, pna);
+	pr_debug("with offset: %llx\n", (unsigned long long)offset);
 
 	/* Translate it into parent bus space */
 	return pbus->translate(addr, offset, pna);
@@ -557,7 +559,7 @@ static u64 __of_translate_address(struct device_node *dev,
 	int na, ns, pna, pns;
 	u64 result = OF_BAD_ADDR;
 
-	pr_debug("OF: ** translation for device %s **\n", of_node_full_name(dev));
+	pr_debug("** translation for device %s **\n", of_node_full_name(dev));
 
 	/* Increase refcount at current level */
 	of_node_get(dev);
@@ -571,14 +573,14 @@ static u64 __of_translate_address(struct device_node *dev,
 	/* Count address cells & copy address locally */
 	bus->count_cells(dev, &na, &ns);
 	if (!OF_CHECK_COUNTS(na, ns)) {
-		pr_debug("OF: Bad cell count for %s\n", of_node_full_name(dev));
+		pr_debug("Bad cell count for %s\n", of_node_full_name(dev));
 		goto bail;
 	}
 	memcpy(addr, in_addr, na * 4);
 
-	pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
+	pr_debug("bus is %s (na=%d, ns=%d) on %s\n",
 	    bus->name, na, ns, of_node_full_name(parent));
-	of_dump_addr("OF: translating address:", addr, na);
+	of_dump_addr("translating address:", addr, na);
 
 	/* Translate */
 	for (;;) {
@@ -589,7 +591,7 @@ static u64 __of_translate_address(struct device_node *dev,
 
 		/* If root, we have finished */
 		if (parent == NULL) {
-			pr_debug("OF: reached root node\n");
+			pr_debug("reached root node\n");
 			result = of_read_number(addr, na);
 			break;
 		}
@@ -598,12 +600,12 @@ static u64 __of_translate_address(struct device_node *dev,
 		pbus = of_match_bus(parent);
 		pbus->count_cells(dev, &pna, &pns);
 		if (!OF_CHECK_COUNTS(pna, pns)) {
-			pr_err("prom_parse: Bad cell count for %s\n",
+			pr_err("Bad cell count for %s\n",
 			       of_node_full_name(dev));
 			break;
 		}
 
-		pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
+		pr_debug("parent bus is %s (na=%d, ns=%d) on %s\n",
 		    pbus->name, pna, pns, of_node_full_name(parent));
 
 		/* Apply bus translation */
@@ -615,7 +617,7 @@ static u64 __of_translate_address(struct device_node *dev,
 		ns = pns;
 		bus = pbus;
 
-		of_dump_addr("OF: one level translation:", addr, na);
+		of_dump_addr("one level translation:", addr, na);
 	}
  bail:
 	of_node_put(parent);
@@ -853,8 +855,7 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
 	}
 
 	if (!ranges) {
-		pr_debug("%s: no dma-ranges found for node(%s)\n",
-			 __func__, np->full_name);
+		pr_debug("no dma-ranges found for node(%s)\n", np->full_name);
 		ret = -ENODEV;
 		goto out;
 	}
@@ -871,8 +872,8 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
 	dmaaddr = of_read_number(ranges, naddr);
 	*paddr = of_translate_dma_address(np, ranges);
 	if (*paddr == OF_BAD_ADDR) {
-		pr_err("%s: translation of DMA address(%pad) to CPU address failed node(%s)\n",
-		       __func__, dma_addr, np->full_name);
+		pr_err("translation of DMA address(%pad) to CPU address failed node(%s)\n",
+		       dma_addr, np->full_name);
 		ret = -EINVAL;
 		goto out;
 	}

drivers/of/base.c

@@ -17,6 +17,9 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
+
+#define pr_fmt(fmt)	"OF: " fmt
+
 #include <linux/console.h>
 #include <linux/ctype.h>
 #include <linux/cpu.h>
@@ -112,6 +115,7 @@ static ssize_t of_node_property_read(struct file *filp, struct kobject *kobj,
 	return memory_read_from_buffer(buf, count, &offset, pp->value, pp->length);
 }
 
+/* always return newly allocated name, caller must free after use */
 static const char *safe_name(struct kobject *kobj, const char *orig_name)
 {
 	const char *name = orig_name;
@@ -126,9 +130,12 @@ static const char *safe_name(struct kobject *kobj, const char *orig_name)
 		name = kasprintf(GFP_KERNEL, "%s#%i", orig_name, ++i);
 	}
 
-	if (name != orig_name)
-		pr_warn("device-tree: Duplicate name in %s, renamed to \"%s\"\n",
+	if (name == orig_name) {
+		name = kstrdup(orig_name, GFP_KERNEL);
+	} else {
+		pr_warn("Duplicate name in %s, renamed to \"%s\"\n",
 			kobject_name(kobj), name);
+	}
 	return name;
 }
 
@@ -159,6 +166,7 @@ int __of_add_property_sysfs(struct device_node *np, struct property *pp)
 int __of_attach_node_sysfs(struct device_node *np)
 {
 	const char *name;
+	struct kobject *parent;
 	struct property *pp;
 	int rc;
 
@@ -171,15 +179,16 @@ int __of_attach_node_sysfs(struct device_node *np)
 	np->kobj.kset = of_kset;
 	if (!np->parent) {
 		/* Nodes without parents are new top level trees */
-		rc = kobject_add(&np->kobj, NULL, "%s",
-				 safe_name(&of_kset->kobj, "base"));
+		name = safe_name(&of_kset->kobj, "base");
+		parent = NULL;
 	} else {
 		name = safe_name(&np->parent->kobj, kbasename(np->full_name));
-		if (!name || !name[0])
-			return -EINVAL;
-
-		rc = kobject_add(&np->kobj, &np->parent->kobj, "%s", name);
+		parent = &np->parent->kobj;
 	}
+	if (!name)
+		return -ENOMEM;
+	rc = kobject_add(&np->kobj, parent, "%s", name);
+	kfree(name);
 	if (rc)
 		return rc;
 
@@ -198,7 +207,7 @@ void __init of_core_init(void)
 	of_kset = kset_create_and_add("devicetree", NULL, firmware_kobj);
 	if (!of_kset) {
 		mutex_unlock(&of_mutex);
-		pr_err("devicetree: failed to register existing nodes\n");
+		pr_err("failed to register existing nodes\n");
 		return;
 	}
 	for_each_of_allnodes(np)
@@ -1815,6 +1824,12 @@ int __of_remove_property(struct device_node *np, struct property *prop)
 	return 0;
 }
 
+void __of_sysfs_remove_bin_file(struct device_node *np, struct property *prop)
+{
+	sysfs_remove_bin_file(&np->kobj, &prop->attr);
+	kfree(prop->attr.attr.name);
+}
+
 void __of_remove_property_sysfs(struct device_node *np, struct property *prop)
 {
 	if (!IS_ENABLED(CONFIG_SYSFS))
@@ -1822,7 +1837,7 @@ void __of_remove_property_sysfs(struct device_node *np, struct property *prop)
 
 	/* at early boot, bail here and defer setup to of_init() */
 	if (of_kset && of_node_is_attached(np))
-		sysfs_remove_bin_file(&np->kobj, &prop->attr);
+		__of_sysfs_remove_bin_file(np, prop);
 }
 
 /**
@@ -1895,7 +1910,7 @@ void __of_update_property_sysfs(struct device_node *np, struct property *newprop
 		return;
 
 	if (oldprop)
-		sysfs_remove_bin_file(&np->kobj, &oldprop->attr);
+		__of_sysfs_remove_bin_file(np, oldprop);
 	__of_add_property_sysfs(np, newprop);
 }
 
@@ -2257,8 +2272,8 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 		of_node_put(node);
 
 		if (!port) {
-			pr_err("%s(): no port node found in %s\n",
-			       __func__, parent->full_name);
+			pr_err("graph: no port node found in %s\n",
+			       parent->full_name);
 			return NULL;
 		}
 	} else {

drivers/of/dynamic.c

@@ -6,6 +6,8 @@
  * device tree nodes.
  */
 
+#define pr_fmt(fmt)	"OF: " fmt
+
 #include <linux/of.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
@@ -55,7 +57,7 @@ void __of_detach_node_sysfs(struct device_node *np)
 	/* only remove properties if on sysfs */
 	if (of_node_is_attached(np)) {
 		for_each_property_of_node(np, pp)
-			sysfs_remove_bin_file(&np->kobj, &pp->attr);
+			__of_sysfs_remove_bin_file(np, pp);
 		kobject_del(&np->kobj);
 	}
 
@@ -96,13 +98,13 @@ int of_reconfig_notify(unsigned long action, struct of_reconfig_data *p)
 	switch (action) {
 	case OF_RECONFIG_ATTACH_NODE:
 	case OF_RECONFIG_DETACH_NODE:
-		pr_debug("of/notify %-15s %s\n", action_names[action],
+		pr_debug("notify %-15s %s\n", action_names[action],
 			pr->dn->full_name);
 		break;
 	case OF_RECONFIG_ADD_PROPERTY:
 	case OF_RECONFIG_REMOVE_PROPERTY:
 	case OF_RECONFIG_UPDATE_PROPERTY:
-		pr_debug("of/notify %-15s %s:%s\n", action_names[action],
+		pr_debug("notify %-15s %s:%s\n", action_names[action],
 			pr->dn->full_name, pr->prop->name);
 		break;
 
@@ -460,12 +462,12 @@ static void __of_changeset_entry_dump(struct of_changeset_entry *ce)
 	case OF_RECONFIG_ADD_PROPERTY:
 	case OF_RECONFIG_REMOVE_PROPERTY:
 	case OF_RECONFIG_UPDATE_PROPERTY:
-		pr_debug("of/cset<%p> %-15s %s/%s\n", ce, action_names[ce->action],
+		pr_debug("cset<%p> %-15s %s/%s\n", ce, action_names[ce->action],
 			ce->np->full_name, ce->prop->name);
 		break;
 	case OF_RECONFIG_ATTACH_NODE:
 	case OF_RECONFIG_DETACH_NODE:
-		pr_debug("of/cset<%p> %-15s %s\n", ce, action_names[ce->action],
+		pr_debug("cset<%p> %-15s %s\n", ce, action_names[ce->action],
 			ce->np->full_name);
 		break;
 	}
@@ -531,13 +533,13 @@ static void __of_changeset_entry_notify(struct of_changeset_entry *ce, bool reve
 		ret = of_property_notify(ce->action, ce->np, ce->prop, ce->old_prop);
 		break;
 	default:
-		pr_err("%s: invalid devicetree changeset action: %i\n", __func__,
+		pr_err("invalid devicetree changeset action: %i\n",
 			(int)ce->action);
 		return;
 	}
 
 	if (ret)
-		pr_err("%s: notifier error @%s\n", __func__, ce->np->full_name);
+		pr_err("changeset notifier error @%s\n", ce->np->full_name);
 }
 
 static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
@@ -568,8 +570,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
 
 		ret = __of_add_property(ce->np, ce->prop);
 		if (ret) {
-			pr_err("%s: add_property failed @%s/%s\n",
-				__func__, ce->np->full_name,
+			pr_err("changeset: add_property failed @%s/%s\n",
+				ce->np->full_name,
 				ce->prop->name);
 			break;
 		}
@@ -577,8 +579,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
 	case OF_RECONFIG_REMOVE_PROPERTY:
 		ret = __of_remove_property(ce->np, ce->prop);
 		if (ret) {
-			pr_err("%s: remove_property failed @%s/%s\n",
-				__func__, ce->np->full_name,
+			pr_err("changeset: remove_property failed @%s/%s\n",
+				ce->np->full_name,
 				ce->prop->name);
 			break;
 		}
@@ -596,8 +598,8 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
 
 		ret = __of_update_property(ce->np, ce->prop, &old_prop);
 		if (ret) {
-			pr_err("%s: update_property failed @%s/%s\n",
-				__func__, ce->np->full_name,
+			pr_err("changeset: update_property failed @%s/%s\n",
+				ce->np->full_name,
 				ce->prop->name);
 			break;
 		}
@@ -677,24 +679,24 @@ int __of_changeset_apply(struct of_changeset *ocs)
 	int ret;
 
 	/* perform the rest of the work */
-	pr_debug("of_changeset: applying...\n");
+	pr_debug("changeset: applying...\n");
 	list_for_each_entry(ce, &ocs->entries, node) {
 		ret = __of_changeset_entry_apply(ce);
 		if (ret) {
-			pr_err("%s: Error applying changeset (%d)\n", __func__, ret);
+			pr_err("Error applying changeset (%d)\n", ret);
 			list_for_each_entry_continue_reverse(ce, &ocs->entries, node)
 				__of_changeset_entry_revert(ce);
 			return ret;
 		}
 	}
-	pr_debug("of_changeset: applied, emitting notifiers.\n");
+	pr_debug("changeset: applied, emitting notifiers.\n");
 
 	/* drop the global lock while emitting notifiers */
 	mutex_unlock(&of_mutex);
 	list_for_each_entry(ce, &ocs->entries, node)
 		__of_changeset_entry_notify(ce, 0);
 	mutex_lock(&of_mutex);
-	pr_debug("of_changeset: notifiers sent.\n");
+	pr_debug("changeset: notifiers sent.\n");
 
 	return 0;
 }
@@ -728,24 +730,24 @@ int __of_changeset_revert(struct of_changeset *ocs)
 	struct of_changeset_entry *ce;
 	int ret;
 
-	pr_debug("of_changeset: reverting...\n");
+	pr_debug("changeset: reverting...\n");
 	list_for_each_entry_reverse(ce, &ocs->entries, node) {
 		ret = __of_changeset_entry_revert(ce);
 		if (ret) {
-			pr_err("%s: Error reverting changeset (%d)\n", __func__, ret);
+			pr_err("Error reverting changeset (%d)\n", ret);
 			list_for_each_entry_continue(ce, &ocs->entries, node)
 				__of_changeset_entry_apply(ce);
 			return ret;
 		}
 	}
-	pr_debug("of_changeset: reverted, emitting notifiers.\n");
+	pr_debug("changeset: reverted, emitting notifiers.\n");
 
 	/* drop the global lock while emitting notifiers */
 	mutex_unlock(&of_mutex);
 	list_for_each_entry_reverse(ce, &ocs->entries, node)
 		__of_changeset_entry_notify(ce, 1);
 	mutex_lock(&of_mutex);
-	pr_debug("of_changeset: notifiers sent.\n");
+	pr_debug("changeset: notifiers sent.\n");
 
 	return 0;
 }
@@ -795,10 +797,9 @@ int of_changeset_action(struct of_changeset *ocs, unsigned long action,
 	struct of_changeset_entry *ce;
 
 	ce = kzalloc(sizeof(*ce), GFP_KERNEL);
-	if (!ce) {
-		pr_err("%s: Failed to allocate\n", __func__);
+	if (!ce)
 		return -ENOMEM;
-	}
+
 	/* get a reference to the node */
 	ce->action = action;
 	ce->np = of_node_get(np);

drivers/of/fdt.c

@@ -9,6 +9,8 @@
  * version 2 as published by the Free Software Foundation.
  */
 
+#define pr_fmt(fmt)	"OF: fdt:" fmt
+
 #include <linux/crc32.h>
 #include <linux/kernel.h>
 #include <linux/initrd.h>
@@ -182,14 +184,12 @@ static void populate_properties(const void *blob,
 
 		val = fdt_getprop_by_offset(blob, cur, &pname, &sz);
 		if (!val) {
-			pr_warn("%s: Cannot locate property at 0x%x\n",
-				__func__, cur);
+			pr_warn("Cannot locate property at 0x%x\n", cur);
 			continue;
 		}
 
 		if (!pname) {
-			pr_warn("%s: Cannot find property name at 0x%x\n",
-				__func__, cur);
+			pr_warn("Cannot find property name at 0x%x\n", cur);
 			continue;
 		}
 
@@ -439,7 +439,7 @@ static int unflatten_dt_nodes(const void *blob,
 	}
 
 	if (offset < 0 && offset != -FDT_ERR_NOTFOUND) {
-		pr_err("%s: Error %d processing FDT\n", __func__, offset);
+		pr_err("Error %d processing FDT\n", offset);
 		return -EINVAL;
 	}
 
@@ -472,7 +472,8 @@ static int unflatten_dt_nodes(const void *blob,
 static void *__unflatten_device_tree(const void *blob,
 				     struct device_node *dad,
 				     struct device_node **mynodes,
-				     void *(*dt_alloc)(u64 size, u64 align))
+				     void *(*dt_alloc)(u64 size, u64 align),
+				     bool detached)
 {
 	int size;
 	void *mem;
@@ -516,6 +517,11 @@ static void *__unflatten_device_tree(const void *blob,
 		pr_warning("End of tree marker overwritten: %08x\n",
 			   be32_to_cpup(mem + size));
 
+	if (detached) {
+		of_node_set_flag(*mynodes, OF_DETACHED);
+		pr_debug("unflattened tree is detached\n");
+	}
+
 	pr_debug(" <- unflatten_device_tree()\n");
 	return mem;
 }
@@ -548,7 +554,8 @@ void *of_fdt_unflatten_tree(const unsigned long *blob,
 	void *mem;
 
 	mutex_lock(&of_fdt_unflatten_mutex);
-	mem = __unflatten_device_tree(blob, dad, mynodes, &kernel_tree_alloc);
+	mem = __unflatten_device_tree(blob, dad, mynodes, &kernel_tree_alloc,
+				      true);
 	mutex_unlock(&of_fdt_unflatten_mutex);
 
 	return mem;
@@ -1237,7 +1244,7 @@ bool __init early_init_dt_scan(void *params)
 void __init unflatten_device_tree(void)
 {
 	__unflatten_device_tree(initial_boot_params, NULL, &of_root,
-				early_init_dt_alloc_memory_arch);
+				early_init_dt_alloc_memory_arch, false);
 
 	/* Get pointer to "/chosen" and "/aliases" nodes for use everywhere */
 	of_alias_scan(early_init_dt_alloc_memory_arch);
@@ -1294,7 +1301,7 @@ static int __init of_fdt_raw_init(void)
 
 	if (of_fdt_crc32 != crc32_be(~0, initial_boot_params,
 				     fdt_totalsize(initial_boot_params))) {
-		pr_warn("fdt: not creating '/sys/firmware/fdt': CRC check failed\n");
+		pr_warn("not creating '/sys/firmware/fdt': CRC check failed\n");
 		return 0;
 	}
 	of_fdt_raw_attr.size = fdt_totalsize(initial_boot_params);

drivers/of/fdt_address.c

@@ -12,6 +12,9 @@
  * the Free Software Foundation; either version 2, or (at your option)
  * any later version.
  */
+
+#define pr_fmt(fmt)	"OF: fdt: " fmt
+
 #include <linux/kernel.h>
 #include <linux/libfdt.h>
 #include <linux/of.h>
@@ -30,7 +33,7 @@ static void __init of_dump_addr(const char *s, const __be32 *addr, int na)
 	pr_debug("%s", s);
 	while(na--)
 		pr_cont(" %08x", *(addr++));
-	pr_debug("\n");
+	pr_cont("\n");
 }
 #else
 static void __init of_dump_addr(const char *s, const __be32 *addr, int na) { }
@@ -77,7 +80,7 @@ static u64 __init fdt_bus_default_map(__be32 *addr, const __be32 *range,
 	s  = of_read_number(range + na + pna, ns);
 	da = of_read_number(addr, na);
 
-	pr_debug("FDT: default map, cp=%llx, s=%llx, da=%llx\n",
+	pr_debug("default map, cp=%llx, s=%llx, da=%llx\n",
 	    cp, s, da);
 
 	if (da < cp || da >= (cp + s))
@@ -123,11 +126,11 @@ static int __init fdt_translate_one(const void *blob, int parent,
 	if (rlen == 0) {
 		offset = of_read_number(addr, na);
 		memset(addr, 0, pna * 4);
-		pr_debug("FDT: empty ranges, 1:1 translation\n");
+		pr_debug("empty ranges, 1:1 translation\n");
 		goto finish;
 	}
 
-	pr_debug("FDT: walking ranges...\n");
+	pr_debug("walking ranges...\n");
 
 	/* Now walk through the ranges */
 	rlen /= 4;
@@ -138,14 +141,14 @@ static int __init fdt_translate_one(const void *blob, int parent,
 			break;
 	}
 	if (offset == OF_BAD_ADDR) {
-		pr_debug("FDT: not found !\n");
+		pr_debug("not found !\n");
 		return 1;
 	}
 	memcpy(addr, ranges + na, 4 * pna);
 
  finish:
-	of_dump_addr("FDT: parent translation for:", addr, pna);
-	pr_debug("FDT: with offset: %llx\n", offset);
+	of_dump_addr("parent translation for:", addr, pna);
+	pr_debug("with offset: %llx\n", offset);
 
 	/* Translate it into parent bus space */
 	return pbus->translate(addr, offset, pna);
@@ -170,12 +173,12 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset)
 	int na, ns, pna, pns;
 	u64 result = OF_BAD_ADDR;
 
-	pr_debug("FDT: ** translation for device %s **\n",
+	pr_debug("** translation for device %s **\n",
 		 fdt_get_name(blob, node_offset, NULL));
 
 	reg = fdt_getprop(blob, node_offset, "reg", &len);
 	if (!reg) {
-		pr_err("FDT: warning: device tree node '%s' has no address.\n",
+		pr_err("warning: device tree node '%s' has no address.\n",
 			fdt_get_name(blob, node_offset, NULL));
 		goto bail;
 	}
@@ -189,15 +192,15 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset)
 	/* Cound address cells & copy address locally */
 	bus->count_cells(blob, parent, &na, &ns);
 	if (!OF_CHECK_COUNTS(na, ns)) {
-		pr_err("FDT: Bad cell count for %s\n",
+		pr_err("Bad cell count for %s\n",
 		       fdt_get_name(blob, node_offset, NULL));
 		goto bail;
 	}
 	memcpy(addr, reg, na * 4);
 
-	pr_debug("FDT: bus (na=%d, ns=%d) on %s\n",
+	pr_debug("bus (na=%d, ns=%d) on %s\n",
 		 na, ns, fdt_get_name(blob, parent, NULL));
-	of_dump_addr("OF: translating address:", addr, na);
+	of_dump_addr("translating address:", addr, na);
 
 	/* Translate */
 	for (;;) {
@@ -207,7 +210,7 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset)
 
 		/* If root, we have finished */
 		if (parent < 0) {
-			pr_debug("FDT: reached root node\n");
+			pr_debug("reached root node\n");
 			result = of_read_number(addr, na);
 			break;
 		}
@@ -216,12 +219,12 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset)
 		pbus = &of_busses[0];
 		pbus->count_cells(blob, parent, &pna, &pns);
 		if (!OF_CHECK_COUNTS(pna, pns)) {
-			pr_err("FDT: Bad cell count for %s\n",
+			pr_err("Bad cell count for %s\n",
 				fdt_get_name(blob, node_offset, NULL));
 			break;
 		}
 
-		pr_debug("FDT: parent bus (na=%d, ns=%d) on %s\n",
+		pr_debug("parent bus (na=%d, ns=%d) on %s\n",
 			 pna, pns, fdt_get_name(blob, parent, NULL));
 
 		/* Apply bus translation */
@@ -234,7 +237,7 @@ static u64 __init fdt_translate_address(const void *blob, int node_offset)
 		ns = pns;
 		bus = pbus;
 
-		of_dump_addr("FDT: one level translation:", addr, na);
+		of_dump_addr("one level translation:", addr, na);
 	}
  bail:
 	return result;

drivers/of/irq.c

@@ -18,6 +18,8 @@
  * driver.
  */
 
+#define pr_fmt(fmt)	"OF: " fmt
+
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/list.h>
@@ -557,6 +559,8 @@ void __init of_irq_init(const struct of_device_id *matches)
 			 * its children can get processed in a subsequent pass.
 			 */
 			list_add_tail(&desc->list, &intc_parent_list);
+
+			of_node_set_flag(desc->dev, OF_POPULATED);
 		}
 
 		/* Get the next pending parent that might have children */

drivers/of/of_pci.c

+#define pr_fmt(fmt)	"OF: PCI: " fmt
+
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/of.h>
@@ -138,7 +140,7 @@ void of_pci_check_probe_only(void)
 	else
 		pci_clear_flags(PCI_PROBE_ONLY);
 
-	pr_info("PCI: PROBE_ONLY %sabled\n", val ? "en" : "dis");
+	pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");
 }
 EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
 
@@ -181,7 +183,7 @@ int of_pci_get_host_bridge_resources(struct device_node *dev,
 	if (!bus_range)
 		return -ENOMEM;
 
-	pr_info("PCI host bridge %s ranges:\n", dev->full_name);
+	pr_info("host bridge %s ranges:\n", dev->full_name);
 
 	err = of_pci_parse_bus_range(dev, bus_range);
 	if (err) {

drivers/of/of_private.h

@@ -83,6 +83,9 @@ extern int __of_attach_node_sysfs(struct device_node *np);
 extern void __of_detach_node(struct device_node *np);
 extern void __of_detach_node_sysfs(struct device_node *np);
 
+extern void __of_sysfs_remove_bin_file(struct device_node *np,
+				       struct property *prop);
+
 /* iterators for transactions, used for overlays */
 /* forward iterator */
 #define for_each_transaction_entry(_oft, _te) \

drivers/of/of_reserved_mem.c

@@ -13,6 +13,8 @@
  * License or (at your optional) any later version of the license.
  */
 
+#define pr_fmt(fmt)	"OF: reserved mem: " fmt
+
 #include <linux/err.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
@@ -76,7 +78,7 @@ void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname,
 	struct reserved_mem *rmem = &reserved_mem[reserved_mem_count];
 
 	if (reserved_mem_count == ARRAY_SIZE(reserved_mem)) {
-		pr_err("Reserved memory: not enough space all defined regions.\n");
+		pr_err("not enough space all defined regions.\n");
 		return;
 	}
 
@@ -109,8 +111,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
 		return -EINVAL;
 
 	if (len != dt_root_size_cells * sizeof(__be32)) {
-		pr_err("Reserved memory: invalid size property in '%s' node.\n",
-				uname);
+		pr_err("invalid size property in '%s' node.\n", uname);
 		return -EINVAL;
 	}
 	size = dt_mem_next_cell(dt_root_size_cells, &prop);
@@ -120,7 +121,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
 	prop = of_get_flat_dt_prop(node, "alignment", &len);
 	if (prop) {
 		if (len != dt_root_addr_cells * sizeof(__be32)) {
-			pr_err("Reserved memory: invalid alignment property in '%s' node.\n",
+			pr_err("invalid alignment property in '%s' node.\n",
 				uname);
 			return -EINVAL;
 		}
@@ -142,7 +143,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
 	if (prop) {
 
 		if (len % t_len != 0) {
-			pr_err("Reserved memory: invalid alloc-ranges property in '%s', skipping node.\n",
+			pr_err("invalid alloc-ranges property in '%s', skipping node.\n",
 			       uname);
 			return -EINVAL;
 		}
@@ -157,7 +158,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
 			ret = early_init_dt_alloc_reserved_memory_arch(size,
 					align, start, end, nomap, &base);
 			if (ret == 0) {
-				pr_debug("Reserved memory: allocated memory for '%s' node: base %pa, size %ld MiB\n",
+				pr_debug("allocated memory for '%s' node: base %pa, size %ld MiB\n",
 					uname, &base,
 					(unsigned long)size / SZ_1M);
 				break;
@@ -169,13 +170,12 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
 		ret = early_init_dt_alloc_reserved_memory_arch(size, align,
 							0, 0, nomap, &base);
 		if (ret == 0)
-			pr_debug("Reserved memory: allocated memory for '%s' node: base %pa, size %ld MiB\n",
+			pr_debug("allocated memory for '%s' node: base %pa, size %ld MiB\n",
 				uname, &base, (unsigned long)size / SZ_1M);
 	}
 
 	if (base == 0) {
-		pr_info("Reserved memory: failed to allocate memory for node '%s'\n",
-			uname);
+		pr_info("failed to allocate memory for node '%s'\n", uname);
 		return -ENOMEM;
 	}
 
@@ -204,7 +204,7 @@ static int __init __reserved_mem_init_node(struct reserved_mem *rmem)
 			continue;
 
 		if (initfn(rmem) == 0) {
-			pr_info("Reserved memory: initialized node %s, compatible id %s\n",
+			pr_info("initialized node %s, compatible id %s\n",
 				rmem->name, compat);
 			return 0;
 		}
@@ -246,7 +246,7 @@ static void __init __rmem_check_for_overlap(void)
 
 			this_end = this->base + this->size;
 			next_end = next->base + next->size;
-			pr_err("Reserved memory: OVERLAP DETECTED!\n%s (%pa--%pa) overlaps with %s (%pa--%pa)\n",
+			pr_err("OVERLAP DETECTED!\n%s (%pa--%pa) overlaps with %s (%pa--%pa)\n",
 			       this->name, &this->base, &this_end,
 			       next->name, &next->base, &next_end);
 		}

drivers/of/overlay.c

@@ -8,7 +8,9 @@
  * modify it under the terms of the GNU General Public License
  * version 2 as published by the Free Software Foundation.
  */
-#undef DEBUG
+
+#define pr_fmt(fmt)	"OF: overlay: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -137,8 +139,8 @@ static int of_overlay_apply_one(struct of_overlay *ov,
 	for_each_property_of_node(overlay, prop) {
 		ret = of_overlay_apply_single_property(ov, target, prop);
 		if (ret) {
-			pr_err("%s: Failed to apply prop @%s/%s\n",
-				__func__, target->full_name, prop->name);
+			pr_err("Failed to apply prop @%s/%s\n",
+			       target->full_name, prop->name);
 			return ret;
 		}
 	}
@@ -146,9 +148,8 @@ static int of_overlay_apply_one(struct of_overlay *ov,
 	for_each_child_of_node(overlay, child) {
 		ret = of_overlay_apply_single_device_node(ov, target, child);
 		if (ret != 0) {
-			pr_err("%s: Failed to apply single node @%s/%s\n",
-					__func__, target->full_name,
-					child->name);
+			pr_err("Failed to apply single node @%s/%s\n",
+			       target->full_name, child->name);
 			of_node_put(child);
 			return ret;
 		}
@@ -176,8 +177,7 @@ static int of_overlay_apply(struct of_overlay *ov)
 
 		err = of_overlay_apply_one(ov, ovinfo->target, ovinfo->overlay);
 		if (err != 0) {
-			pr_err("%s: overlay failed '%s'\n",
-				__func__, ovinfo->target->full_name);
+			pr_err("apply failed '%s'\n", ovinfo->target->full_name);
 			return err;
 		}
 	}
@@ -208,7 +208,7 @@ static struct device_node *find_target_node(struct device_node *info_node)
 	if (ret == 0)
 		return of_find_node_by_path(path);
 
-	pr_err("%s: Failed to find target for node %p (%s)\n", __func__,
+	pr_err("Failed to find target for node %p (%s)\n",
 		info_node, info_node->name);
 
 	return NULL;
@@ -355,8 +355,6 @@ int of_overlay_create(struct device_node *tree)
 
 	id = idr_alloc(&ov_idr, ov, 0, 0, GFP_KERNEL);
 	if (id < 0) {
-		pr_err("%s: idr_alloc() failed for tree@%s\n",
-				__func__, tree->full_name);
 		err = id;
 		goto err_destroy_trans;
 	}
@@ -365,26 +363,21 @@ int of_overlay_create(struct device_node *tree)
 	/* build the overlay info structures */
 	err = of_build_overlay_info(ov, tree);
 	if (err) {
-		pr_err("%s: of_build_overlay_info() failed for tree@%s\n",
-				__func__, tree->full_name);
+		pr_err("of_build_overlay_info() failed for tree@%s\n",
+		       tree->full_name);
 		goto err_free_idr;
 	}
 
 	/* apply the overlay */
 	err = of_overlay_apply(ov);
-	if (err) {
-		pr_err("%s: of_overlay_apply() failed for tree@%s\n",
-				__func__, tree->full_name);
+	if (err)
 		goto err_abort_trans;
-	}
 
 	/* apply the changeset */
 	err = __of_changeset_apply(&ov->cset);
-	if (err) {
-		pr_err("%s: __of_changeset_apply() failed for tree@%s\n",
-				__func__, tree->full_name);
+	if (err)
 		goto err_revert_overlay;
-	}
+
 
 	/* add to the tail of the overlay list */
 	list_add_tail(&ov->node, &ov_list);
@@ -469,8 +462,7 @@ static int overlay_removal_is_ok(struct of_overlay *ov)
 
 	list_for_each_entry(ce, &ov->cset.entries, node) {
 		if (!overlay_is_topmost(ov, ce->np)) {
-			pr_err("%s: overlay #%d is not topmost\n",
-					__func__, ov->id);
+			pr_err("overlay #%d is not topmost\n", ov->id);
 			return 0;
 		}
 	}
@@ -496,16 +488,13 @@ int of_overlay_destroy(int id)
 	ov = idr_find(&ov_idr, id);
 	if (ov == NULL) {
 		err = -ENODEV;
-		pr_err("%s: Could not find overlay #%d\n",
-				__func__, id);
+		pr_err("destroy: Could not find overlay #%d\n", id);
 		goto out;
 	}
 
 	/* check whether the overlay is safe to remove */
 	if (!overlay_removal_is_ok(ov)) {
 		err = -EBUSY;
-		pr_err("%s: removal check failed for overlay #%d\n",
-				__func__, id);
 		goto out;
 	}
 

drivers/of/platform.c

@@ -11,6 +11,9 @@
  *  2 of the License, or (at your option) any later version.
  *
  */
+
+#define pr_fmt(fmt)	"OF: " fmt
+
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/amba/bus.h>
@@ -31,7 +34,6 @@ const struct of_device_id of_default_bus_match_table[] = {
 #endif /* CONFIG_ARM_AMBA */
 	{} /* Empty terminated list */
 };
-EXPORT_SYMBOL(of_default_bus_match_table);
 
 static int of_dev_node_match(struct device *dev, void *data)
 {
@@ -234,11 +236,8 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
 		return NULL;
 
 	dev = amba_device_alloc(NULL, 0, 0);
-	if (!dev) {
-		pr_err("%s(): amba_device_alloc() failed for %s\n",
-		       __func__, node->full_name);
+	if (!dev)
 		goto err_clear_flag;
-	}
 
 	/* setup generic device info */
 	dev->dev.of_node = of_node_get(node);
@@ -261,15 +260,15 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
 
 	ret = of_address_to_resource(node, 0, &dev->res);
 	if (ret) {
-		pr_err("%s(): of_address_to_resource() failed (%d) for %s\n",
-		       __func__, ret, node->full_name);
+		pr_err("amba: of_address_to_resource() failed (%d) for %s\n",
+		       ret, node->full_name);
 		goto err_free;
 	}
 
 	ret = amba_device_add(dev, &iomem_resource);
 	if (ret) {
-		pr_err("%s(): amba_device_add() failed (%d) for %s\n",
-		       __func__, ret, node->full_name);
+		pr_err("amba_device_add() failed (%d) for %s\n",
+		       ret, node->full_name);
 		goto err_free;
 	}
 
@@ -363,6 +362,12 @@ static int of_platform_bus_create(struct device_node *bus,
 		return 0;
 	}
 
+	if (of_node_check_flag(bus, OF_POPULATED_BUS)) {
+		pr_debug("%s() - skipping %s, already populated\n",
+			__func__, bus->full_name);
+		return 0;
+	}
+
 	auxdata = of_dev_lookup(lookup, bus);
 	if (auxdata) {
 		bus_id = auxdata->name;
@@ -414,7 +419,7 @@ int of_platform_bus_probe(struct device_node *root,
 	if (!root)
 		return -EINVAL;
 
-	pr_debug("of_platform_bus_probe()\n");
+	pr_debug("%s()\n", __func__);
 	pr_debug(" starting at: %s\n", root->full_name);
 
 	/* Do a self check of bus type, if there's a match, create children */
@@ -466,6 +471,9 @@ int of_platform_populate(struct device_node *root,
 	if (!root)
 		return -EINVAL;
 
+	pr_debug("%s()\n", __func__);
+	pr_debug(" starting at: %s\n", root->full_name);
+
 	for_each_child_of_node(root, child) {
 		rc = of_platform_bus_create(child, matches, lookup, parent, true);
 		if (rc) {
@@ -489,6 +497,15 @@ int of_platform_default_populate(struct device_node *root,
 }
 EXPORT_SYMBOL_GPL(of_platform_default_populate);
 
+static int __init of_platform_default_populate_init(void)
+{
+	if (of_have_populated_dt())
+		of_platform_default_populate(NULL, NULL, NULL);
+
+	return 0;
+}
+arch_initcall_sync(of_platform_default_populate_init);
+
 static int of_platform_device_destroy(struct device *dev, void *data)
 {
 	/* Do not touch devices not populated from the device tree */

drivers/of/resolver.c

@@ -9,6 +9,8 @@
  * version 2 as published by the Free Software Foundation.
  */
 
+#define pr_fmt(fmt)	"OF: resolver: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -313,6 +315,11 @@ int of_resolve_phandles(struct device_node *resolve)
 	phandle phandle, phandle_delta;
 	int err;
 
+	if (!resolve)
+		pr_err("%s: null node\n", __func__);
+	if (resolve && !of_node_check_flag(resolve, OF_DETACHED))
+		pr_err("%s: node %s not detached\n", __func__,
+			 resolve->full_name);
 	/* the resolve node must exist, and be detached */
 	if (!resolve || !of_node_check_flag(resolve, OF_DETACHED))
 		return -EINVAL;
@@ -369,6 +376,7 @@ int of_resolve_phandles(struct device_node *resolve)
 
 	/* we need to fixup, but no root symbols... */
 	if (!root_sym) {
+		pr_err("%s: no symbols in root of device tree.\n", __func__);
 		err = -EINVAL;
 		goto out;
 	}

drivers/of/unittest.c

@@ -771,7 +771,7 @@ static void __init of_unittest_platform_populate(void)
 	};
 
 	np = of_find_node_by_path("/testcase-data");
-	of_platform_populate(np, of_default_bus_match_table, NULL, NULL);
+	of_platform_default_populate(np, NULL, NULL);
 
 	/* Test that a missing irq domain returns -EPROBE_DEFER */
 	np = of_find_node_by_path("/testcase-data/testcase-device1");
@@ -1871,8 +1871,7 @@ static void __init of_unittest_overlay(void)
 		goto out;
 	}
 
-	ret = of_platform_populate(bus_np, of_default_bus_match_table,
-			NULL, NULL);
+	ret = of_platform_default_populate(bus_np, NULL, NULL);
 	if (ret != 0) {
 		unittest(0, "could not populate bus @ \"%s\"\n", bus_path);
 		goto out;

include/linux/of_iommu.h

@@ -11,7 +11,6 @@ extern int of_get_dma_window(struct device_node *dn, const char *prefix,
 			     int index, unsigned long *busno, dma_addr_t *addr,
 			     size_t *size);
 
-extern void of_iommu_init(void);
 extern const struct iommu_ops *of_iommu_configure(struct device *dev,
 					struct device_node *master_np);
 
@@ -24,7 +23,6 @@ static inline int of_get_dma_window(struct device_node *dn, const char *prefix,
 	return -EINVAL;
 }
 
-static inline void of_iommu_init(void) { }
 static inline const struct iommu_ops *of_iommu_configure(struct device *dev,
 					 struct device_node *master_np)
 {

scripts/dtc/dt_to_config

+#!/usr/bin/perl
+
+# Copyright 2016 by Frank Rowand
+# Copyright 2016 by Gaurav Minocha
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License v2.
+
+use strict 'refs';
+use strict subs;
+
+use Getopt::Long;
+
+$VUFX = "160610a";
+
+$script_name = $0;
+$script_name =~ s|^.*/||;
+
+
+# ----- constants for print_flags()
+
+# Position in string $pr_flags.  Range of 0..($num_pr_flags - 1).
+$pr_flag_pos_mcompatible       = 0;
+$pr_flag_pos_driver            = 1;
+$pr_flag_pos_mdriver           = 2;
+$pr_flag_pos_config            = 3;
+$pr_flag_pos_mconfig           = 4;
+$pr_flag_pos_node_not_enabled  = 5;
+$pr_flag_pos_white_list        = 6;
+$pr_flag_pos_hard_coded        = 7;
+$pr_flag_pos_config_hard_coded = 8;
+$pr_flag_pos_config_none       = 9;
+$pr_flag_pos_config_m          = 10;
+$pr_flag_pos_config_y          = 11;
+$pr_flag_pos_config_test_fail  = 12;
+
+$num_pr_flags = $pr_flag_pos_config_test_fail + 1;
+
+# flags in @pr_flag_value must be unique values to allow simple regular
+# expessions to work for --include_flags and --exclude_flags.
+# Convention: use upper case letters for potential issues or problems.
+
+@pr_flag_value = ('M', 'd', 'D', 'c', 'C', 'E', 'W', 'H', 'x', 'n', 'm', 'y', 'F');
+
+@pr_flag_help = (
+    "multiple compatibles found for this node",
+    "driver found for this compatible",
+    "multiple drivers found for this compatible",
+    "kernel config found for this driver",
+    "multiple config options found for this driver",
+    "node is not enabled",
+    "compatible is white listed",
+    "matching driver and/or kernel config is hard coded",
+    "kernel config hard coded in Makefile",
+    "one or more kernel config file options is not set",
+    "one or more kernel config file options is set to 'm'",
+    "one or more kernel config file options is set to 'y'",
+    "one of more kernel config file options fails to have correct value"
+);
+
+
+# -----
+
+%driver_config = ();   # driver config array, indexed by driver source file
+%driver_count = ();    # driver_cnt, indexed by compatible
+%compat_driver = ();   # compatible driver array, indexed by compatible
+%existing_config = (); # existing config symbols present in given config file
+                       # expected values are: "y", "m", a decimal number, a
+                       # hex number, or a string
+
+# ----- magic compatibles, do not have a driver
+#
+# Will not search for drivers for these compatibles.
+
+%compat_white_list = (
+       'none'                  => '1',
+       'pci'                   => '1',
+       'simple-bus'            => '1',
+);
+
+# Will not search for drivers for these compatibles.
+#
+# These compatibles have a very large number of false positives.
+#
+# 'hardcoded_no_driver' is a magic value.  Other code knows this
+# magic value.  Do not use 'no_driver' here!
+#
+# Revisit each 'hardcoded_no_driver' to see how the compatible
+# is used.  Are there drivers that can be provided?
+
+%driver_hard_code_list = (
+       'cache'                 => ['hardcoded_no_driver'],
+       'eeprom'                => ['hardcoded_no_driver'],
+       'gpio'                  => ['hardcoded_no_driver'],
+       'gpio-keys'             => ['drivers/input/keyboard/gpio_keys.c'],
+       'i2c-gpio'              => ['drivers/i2c/busses/i2c-gpio.c'],
+       'isa'                   => ['arch/mips/mti-malta/malta-dt.c',
+                                    'arch/x86/kernel/devicetree.c'],
+       'led'                   => ['hardcoded_no_driver'],
+       'm25p32'                => ['hardcoded_no_driver'],
+       'm25p64'                => ['hardcoded_no_driver'],
+       'm25p80'                => ['hardcoded_no_driver'],
+       'mtd-ram'               => ['drivers/mtd/maps/physmap_of.c'],
+       'pwm-backlight'         => ['drivers/video/backlight/pwm_bl.c'],
+       'spidev'                => ['hardcoded_no_driver'],
+       'syscon'                => ['drivers/mfd/syscon.c'],
+       'tlv320aic23'           => ['hardcoded_no_driver'],
+       'wm8731'                => ['hardcoded_no_driver'],
+);
+
+# Use these config options instead of searching makefiles
+
+%driver_config_hard_code_list = (
+
+       # this one needed even if %driver_hard_code_list is empty
+       'no_driver'                             => ['no_config'],
+       'hardcoded_no_driver'                   => ['no_config'],
+
+       # drivers/usb/host/ehci-ppc-of.c
+       # drivers/usb/host/ehci-xilinx-of.c
+       #  are included from:
+       #    drivers/usb/host/ehci-hcd.c
+       #  thus the search of Makefile for the included .c files is incorrect
+       # ehci-hcd.c wraps the includes with ifdef CONFIG_USB_EHCI_HCD_..._OF
+       #
+       # similar model for ohci-hcd.c (but no ohci-xilinx-of.c)
+       #
+       # similarly, uhci-hcd.c includes uhci-platform.c
+
+       'drivers/usb/host/ehci-ppc-of.c'        => ['CONFIG_USB_EHCI_HCD',
+                                                   'CONFIG_USB_EHCI_HCD_PPC_OF'],
+       'drivers/usb/host/ohci-ppc-of.c'        => ['CONFIG_USB_OHCI_HCD',
+                                                   'CONFIG_USB_OHCI_HCD_PPC_OF'],
+
+       'drivers/usb/host/ehci-xilinx-of.c'     => ['CONFIG_USB_EHCI_HCD',
+                                                   'CONFIG_USB_EHCI_HCD_XILINX'],
+
+       'drivers/usb/host/uhci-platform.c'      => ['CONFIG_USB_UHCI_HCD',
+                                                   'CONFIG_USB_UHCI_PLATFORM'],
+
+       # scan_makefile will find only one of these config options:
+       #    ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)
+       'arch/arm/mach-imx/platsmp.c'           => ['CONFIG_SOC_IMX6 && CONFIG_SMP',
+                                                   'CONFIG_SOC_LS1021A && CONFIG_SMP'],
+);
+
+
+# 'virt/kvm/arm/.*' are controlled by makefiles in other directories,
+# using relative paths, such as 'KVM := ../../../virt/kvm'.  Do not
+# add complexity to find_kconfig() to deal with this.  There is a long
+# term intent to change the kvm related makefiles to the normal kernel
+# style.  After that is done, this entry can be removed from the
+# black_list_driver.
+
+@black_list_driver = (
+       # kvm no longer a problem after commit 503a62862e8f in 4.7-rc1
+       # 'virt/kvm/arm/.*',
+);
+
+
+sub usage()
+{
+       print
+"
+Usage: $script_name [options] device-tree...
+
+    device_tree is: dts_file | dtb_file | proc_device-tree
+
+
+Valid options:
+     -c FILE             Read kernel config options from FILE
+    --config FILE        synonym for 'c'
+    --config-format      config file friendly output format
+    --exclude-flag FLAG  exclude entries with a matching flag
+     -h                  Display this message and exit
+    --help               synonym for 'h'
+    --black-list-driver  use driver black list
+    --white-list-config  use config white list
+    --white-list-driver  use driver white list
+    --include-flag FLAG  include only entries with a matching flag
+    --include-suspect    include only entries with an uppercase flag
+    --short-name         do not show the path portion of the node name
+    --show-lists         report of white and black lists
+    --version            Display program version and exit
+
+
+  Report driver source files that match the compatibles in the device
+  tree file and the kernel config options that enable the driver source
+  files.
+
+  This program must be run in the root directory of a Linux kernel
+  source tree.
+
+  The default format is a report that is intended to be easily human
+  scannable.
+
+  An alternate format can be selected by --config-format.  This will
+  create output that can easily be edited to create a fragment that can
+  be appended to the existing kernel config file.  Each entry consists of
+  multiple lines.  The first line reports flags, the node path, compatible
+  value, driver file matching the compatible, configuration options, and
+  current values of the configuration options.  For each configuration
+  option, the following lines report the current value and the value that
+  is required for the driver file to be included in the kernel.
+
+  If a large number of drivers or config options is listed for a node,
+  and the '$pr_flag_value[$pr_flag_pos_hard_coded]' flag is set consider using --white-list-config and/or
+  --white-list-driver.  If the white list option suppresses the correct
+  entry please report that as a bug.
+
+  CAUTION:
+     This program uses heuristics to guess which driver(s) support each
+     compatible string and which config option(s) enables the driver(s).
+     Do not believe that the reported information is fully correct.
+     This program is intended to aid the process of determining the
+     proper kernel configuration for a device tree, but this is not
+     a fully automated process -- human involvement may still be
+     required!
+
+     The driver match heuristic used is to search for source files
+     containing the compatible string enclosed in quotes.
+
+     This program might not be able to find all drivers matching a
+     compatible string.
+
+     Some makefiles are overly clever.  This program was not made
+     complex enough to handle them.  If no config option is listed
+     for a driver, look at the makefile for the driver source file.
+     Even if a config option is listed for a driver, some other
+     available config options may not be listed.
+
+  FLAG values:
+";
+
+       for ($k = 0; $k < $num_pr_flags; $k++) {
+               printf "     %s   %s\n", $pr_flag_value[$k], $pr_flag_help[$k];
+       }
+
+       print
+"
+     Upper case letters indicate potential issues or problems.
+
+  The flag:
+
+";
+
+       $k = $pr_flag_pos_hard_coded;
+       printf "     %s   %s\n", $pr_flag_value[$k], $pr_flag_help[$k];
+
+       print
+"
+  will be set if the config or driver is in the white lists, even if
+  --white-list-config and --white-list-driver are not specified.
+  This is a hint that 1) many of these reported lines are likely to
+  be incorrect, and 2) using those options will reduce the number of
+  drivers and/or config options reported.
+
+  --white-list-config and --white-list-driver may not be accurate if this
+  program is not well maintained.  Use them with appropriate skepticism.
+  Use the --show-lists option to report the values in the list.
+
+  Return value:
+    0   if no error
+    1   error processing command line
+    2   unable to open or read kernel config file
+    3   unable to open or process input device tree file(s)
+
+  EXAMPLES:
+
+     dt_to_config arch/arm/boot/dts/my_dts_file.dts
+
+       Basic report.
+
+     dt_to_config \\
+        --config \${KBUILD_OUTPUT}/.config \\
+        arch/\${ARCH}/boot/dts/my_dts_file.dts
+
+       Full report, with config file issues noted.
+
+     dt_to_config --include-suspect \\
+        --config \${KBUILD_OUTPUT}/.config \\
+        arch/\${ARCH}/boot/dts/my_dts_file.dts
+
+       Report of node / compatible string / driver tuples that should
+       be further investigated.  A node may have multiple compatible
+       strings.  A compatible string may be matched by multiple drivers.
+       A driver may have config file issues noted.  The compatible string
+       and/or driver may be in the white lists.
+
+     dt_to_config --include-suspect --config-format \\
+        --config ${KBUILD_OUTPUT}/.config \\
+        arch/\${ARCH}/boot/dts/my_dts_file.dts
+
+       Report of node / compatible string / driver tuples that should
+       be further investigated.  The report can be edited to uncomment
+       the config options to select the desired tuple for a given node.
+       A node may have multiple compatible strings.  A compatible string
+       may be matched by multiple drivers.  A driver may have config file
+       issues noted.  The compatible string and/or driver may be in the
+       white lists.
+
+";
+}
+
+sub set_flag()
+{
+       # pr_flags_ref is a reference to $pr_flags
+
+       my $pr_flags_ref = shift;
+       my $pos          = shift;
+
+       substr $$pr_flags_ref, $pos, 1, $pr_flag_value[$pos];
+
+       return $pr_flags;
+}
+
+sub print_flags()
+{
+       # return 1 if anything printed, else 0
+
+       # some fields of pn_arg_ref might not be used in this function, but
+       # extract all of them anyway.
+       my $pn_arg_ref     = shift;
+
+       my $compat         = $pn_arg_ref->{compat};
+       my $compatible_cnt = $pn_arg_ref->{compatible_cnt};
+       my $config         = $pn_arg_ref->{config};
+       my $config_cnt     = $pn_arg_ref->{config_cnt};
+       my $driver         = $pn_arg_ref->{driver};
+       my $driver_cnt     = $pn_arg_ref->{driver_cnt};
+       my $full_node      = $pn_arg_ref->{full_node};
+       my $node           = $pn_arg_ref->{node};
+       my $node_enabled   = $pn_arg_ref->{node_enabled};
+       my $white_list     = $pn_arg_ref->{white_list};
+
+       my $pr_flags       = '-' x $num_pr_flags;
+
+
+       # ----- set flags in $pr_flags
+
+       if ($compatible_cnt > 1) {
+               &set_flag(\$pr_flags, $pr_flag_pos_mcompatible);
+       }
+
+       if ($config_cnt > 1) {
+               &set_flag(\$pr_flags, $pr_flag_pos_mconfig);
+       }
+
+       if ($driver_cnt >= 1) {
+               &set_flag(\$pr_flags, $pr_flag_pos_driver);
+       }
+
+       if ($driver_cnt > 1) {
+               &set_flag(\$pr_flags, $pr_flag_pos_mdriver);
+       }
+
+       # These strings are the same way the linux kernel tests.
+       # The ePapr lists of values is slightly different.
+       if (!(
+             ($node_enabled eq "") ||
+             ($node_enabled eq "ok") ||
+             ($node_enabled eq "okay")
+            )) {
+               &set_flag(\$pr_flags, $pr_flag_pos_node_not_enabled);
+       }
+
+       if ($white_list) {
+               &set_flag(\$pr_flags, $pr_flag_pos_white_list);
+       }
+
+       if (exists($driver_hard_code_list{$compat}) ||
+           (exists($driver_config_hard_code_list{$driver}) &&
+            ($driver ne "no_driver"))) {
+               &set_flag(\$pr_flags, $pr_flag_pos_hard_coded);
+       }
+
+       my @configs = split(' && ', $config);
+       for $configs (@configs) {
+               $not = $configs =~ /^!/;
+               $configs =~ s/^!//;
+
+               if (($configs ne "no_config") && ($configs ne "no_makefile")) {
+                       &set_flag(\$pr_flags, $pr_flag_pos_config);
+               }
+
+               if (($config_cnt >= 1) &&
+                   ($configs !~ /CONFIG_/) &&
+                   (($configs ne "no_config") && ($configs ne "no_makefile"))) {
+                       &set_flag(\$pr_flags, $pr_flag_pos_config_hard_coded);
+               }
+
+               my $existing_config = $existing_config{$configs};
+               if ($existing_config eq "m") {
+                       &set_flag(\$pr_flags, $pr_flag_pos_config_m);
+                       # Possible fail, depends on whether built in or
+                       # module is desired.
+                       &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
+               } elsif ($existing_config eq "y") {
+                       &set_flag(\$pr_flags, $pr_flag_pos_config_y);
+                       if ($not) {
+                               &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
+                       }
+               } elsif (($config_file) && ($configs =~ /CONFIG_/)) {
+                       &set_flag(\$pr_flags, $pr_flag_pos_config_none);
+                       if (!$not) {
+                               &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
+                       }
+               }
+       }
+
+       # ----- include / exclude filters
+
+       if ($include_flag_pattern && ($pr_flags !~ m/$include_flag_pattern/)) {
+               return 0;
+       }
+
+       if ($exclude_flag_pattern && ($pr_flags =~ m/$exclude_flag_pattern/)) {
+               return 0;
+       }
+
+       if ($config_format) {
+               print "# ";
+       }
+       print "$pr_flags : ";
+
+       return 1;
+}
+
+
+sub print_node()
+{
+       # return number of lines printed
+
+       # some fields of pn_arg_ref might not be used in this function, but
+       # extract all of them anyway.
+       my $pn_arg_ref     = shift;
+
+       my $compat         = $pn_arg_ref->{compat};
+       my $compatible_cnt = $pn_arg_ref->{compatible_cnt};
+       my $config         = $pn_arg_ref->{config};
+       my $config_cnt     = $pn_arg_ref->{config_cnt};
+       my $driver         = $pn_arg_ref->{driver};
+       my $driver_cnt     = $pn_arg_ref->{driver_cnt};
+       my $full_node      = $pn_arg_ref->{full_node};
+       my $node           = $pn_arg_ref->{node};
+       my $node_enabled   = $pn_arg_ref->{node_enabled};
+       my $white_list     = $pn_arg_ref->{white_list};
+
+       my $separator;
+
+       if (! &print_flags($pn_arg_ref)) {
+               return 0;
+       }
+
+
+       if ($short_name) {
+               print "$node";
+       } else {
+               print "$full_node";
+       }
+       print " : $compat : $driver : $config : ";
+
+       my @configs = split(' && ', $config);
+
+       if ($config_file) {
+               for $configs (@configs) {
+                       $configs =~ s/^!//;
+                       my $existing_config = $existing_config{$configs};
+                       if (!$existing_config) {
+                               # check for /-m/, /-y/, or /-objs/
+                               if ($configs !~ /CONFIG_/) {
+                                       $existing_config = "x";
+                               };
+                       };
+                       if ($existing_config) {
+                               print "$separator", "$existing_config";
+                               $separator = ", ";
+                       } else {
+                               print "$separator", "n";
+                               $separator = ", ";
+                       }
+               }
+       } else {
+               print "none";
+       }
+
+       print "\n";
+
+       if ($config_format) {
+               for $configs (@configs) {
+                       $not = $configs =~ /^!/;
+                       $configs =~ s/^!//;
+                       my $existing_config = $existing_config{$configs};
+
+                       if ($not) {
+                               if ($configs !~ /CONFIG_/) {
+                                       print "# $configs\n";
+                               } elsif ($existing_config eq "m") {
+                                       print "# $configs is m\n";
+                                       print "# $configs=n\n";
+                               } elsif ($existing_config eq "y") {
+                                       print "# $configs is set\n";
+                                       print "# $configs=n\n";
+                               } else {
+                                       print "# $configs is not set\n";
+                                       print "# $configs=n\n";
+                               }
+
+                       } else {
+                               if ($configs !~ /CONFIG_/) {
+                                       print "# $configs\n";
+                               } elsif ($existing_config eq "m") {
+                                       print "# $configs is m\n";
+                                       print "# $configs=y\n";
+                               } elsif ($existing_config eq "y") {
+                                       print "# $configs is set\n";
+                                       print "# $configs=y\n";
+                               } else {
+                                       print "# $configs is not set\n";
+                                       print "# $configs=y\n";
+                               }
+                       }
+               }
+       }
+
+       return 1;
+}
+
+
+sub scan_makefile
+{
+       my $pn_arg_ref    = shift;
+       my $driver        = shift;
+
+       # ----- Find Kconfig symbols that enable driver
+
+       my ($dir, $base) = $driver =~ m{(.*)/(.*).c};
+
+       my $makefile = $dir . "/Makefile";
+       if (! -r $makefile) {
+               $makefile = $dir . "/Kbuild";
+       }
+       if (! -r $makefile) {
+               my $config;
+
+               $config = 'no_makefile';
+               push @{ $driver_config{$driver} }, $config;
+               return;
+       }
+
+       if (!open(MAKEFILE_FILE, "<", "$makefile")) {
+               return;
+       }
+
+       my $line;
+       my @config;
+       my @if_config;
+       my @make_var;
+
+       NEXT_LINE:
+       while ($next_line = <MAKEFILE_FILE>) {
+               my $config;
+               my $if_config;
+               my $ifdef;
+               my $ifeq;
+               my $ifndef;
+               my $ifneq;
+               my $ifdef_config;
+               my $ifeq_config;
+               my $ifndef_config;
+               my $ifneq_config;
+
+               chomp($next_line);
+               $line = $line . $next_line;
+               if ($next_line =~ /\\$/) {
+                       $line =~ s/\\$/ /;
+                       next NEXT_LINE;
+               }
+               if ($line =~ /^\s*#/) {
+                       $line = "";
+                       next NEXT_LINE;
+               }
+
+               # -----  condition ... else ... endif
+
+               if ($line =~ /^([ ]\s*|)else\b/) {
+                       $if_config = "!" . pop @if_config;
+                       $if_config =~ s/^!!//;
+                       push @if_config, $if_config;
+                       $line =~ s/^([ ]\s*|)else\b//;
+               }
+
+               ($null, $ifeq_config,  $ifeq_config_val )  = $line =~ /^([ ]\s*|)ifeq\b.*\b(CONFIG_[A-Za-z0-9_]*)(.*)/;
+               ($null, $ifneq_config, $ifneq_config_val)  = $line =~ /^([ ]\s*|)ifneq\b.*\b(CONFIG_[A-Za-z0-9_]*)(.*)/;
+               ($null, $ifdef_config)                     = $line =~ /^([ ]\s*|)ifdef\b.*\b(CONFIG_[A-Za-z0-9_]*)/;
+               ($null, $ifndef_config)                    = $line =~ /^([ ]\s*|)ifndef\b.*\b(CONFIG_[A-Za-z0-9_]*)/;
+
+               ($null, $ifeq)   = $line =~ /^([ ]\s*|)ifeq\b\s*(.*)/;
+               ($null, $ifneq)  = $line =~ /^([ ]\s*|)ifneq\b\s*(.*)/;
+               ($null, $ifdef)  = $line =~ /^([ ]\s*|)ifdef\b\s*(.*)/;
+               ($null, $ifndef) = $line =~ /^([ ]\s*|)ifndef\b\s*(.*)/;
+
+               # Order of tests is important.  Prefer "CONFIG_*" regex match over
+               # less specific regex match.
+               if ($ifdef_config) {
+                       $if_config = $ifdef_config;
+               } elsif ($ifeq_config) {
+                       if ($ifeq_config_val =~ /y/) {
+                               $if_config = $ifeq_config;
+                       } else {
+                               $if_config = "!" . $ifeq_config;
+                       }
+               } elsif ($ifndef_config) {
+                       $if_config = "!" . $ifndef_config;
+               } elsif ($ifneq_config) {
+                       if ($ifneq_config_val =~ /y/) {
+                               $if_config = "!" . $ifneq_config;
+                       } else {
+                               $if_config = $ifneq_config;
+                       }
+               } elsif ($ifdef) {
+                       $if_config = $ifdef;
+               } elsif ($ifeq) {
+                       $if_config = $ifeq;
+               } elsif ($ifndef) {
+                       $if_config = "!" . $ifndef;
+               } elsif ($ifneq) {
+                       $if_config = "!" . $ifneq;
+               } else {
+                       $if_config = "";
+               }
+               $if_config =~ s/^!!//;
+
+               if ($if_config) {
+                       push @if_config, $if_config;
+                       $line = "";
+                       next NEXT_LINE;
+               }
+
+               if ($line =~ /^([ ]\s*|)endif\b/) {
+                       pop @if_config;
+                       $line = "";
+                       next NEXT_LINE;
+               }
+
+               # ----- simple CONFIG_* = *.[co]  or  xxx [+:?]*= *.[co]
+               # Most makefiles select on *.o, but
+               # arch/powerpc/boot/Makefile selects on *.c
+
+               ($config) = $line =~ /(CONFIG_[A-Za-z0-9_]+).*\b$base.[co]\b/;
+
+               # ----- match a make variable instead of *.[co]
+               # Recursively expanded variables are not handled.
+
+               if (!$config) {
+                       my $make_var;
+                       ($make_var) = $line =~ /\s*(\S+?)\s*[+:\?]*=.*\b$base.[co]\b/;
+                       if ($make_var) {
+                               if ($make_var =~ /[a-zA-Z0-9]+-[ym]/) {
+                                       $config = $make_var;
+                               } elsif ($make_var =~ /[a-zA-Z0-9]+-objs/) {
+                                       $config = $make_var;
+                               } else {
+                                       push @make_var, $make_var;
+                               }
+                       }
+               }
+
+               if (!$config) {
+                       for $make_var (@make_var) {
+                               ($config) = $line =~ /(CONFIG_[A-Za-z0-9_]+).*\b$make_var\b/;
+                               last if ($config);
+                       }
+               }
+
+               if (!$config) {
+                       for $make_var (@make_var) {
+                               ($config) = $line =~ /\s*(\S+?)\s*[+:\?]*=.*\b$make_var\b/;
+                               last if ($config);
+                       }
+               }
+
+               # ----- next if no config found
+
+               if (!$config) {
+                       $line = "";
+                       next NEXT_LINE;
+               }
+
+               for $if_config (@if_config) {
+                       $config = $if_config . " && " . $config;
+               }
+
+               push @{ $driver_config{$driver} }, $config;
+
+               $line = "";
+       }
+
+       close(MAKEFILE_FILE);
+
+}
+
+
+sub find_kconfig
+{
+       my $pn_arg_ref    = shift;
+       my $driver        = shift;
+
+       my $lines_printed = 0;
+       my @configs;
+
+       if (!@{ $driver_config{$driver} }) {
+               &scan_makefile($pn_arg_ref, $driver);
+               if (!@{ $driver_config{$driver} }) {
+                       push @{ $driver_config{$driver} }, "no_config";
+               }
+       }
+
+       @configs = @{ $driver_config{$driver} };
+
+       $$pn_arg_ref{config_cnt} = $#configs + 1;
+       for my $config (@configs) {
+               $$pn_arg_ref{config} = $config;
+               $lines_printed += &print_node($pn_arg_ref);
+       }
+
+       return $lines_printed;
+}
+
+
+sub handle_compatible()
+{
+       my $full_node     = shift;
+       my $node          = shift;
+       my $compatible    = shift;
+       my $node_enabled  = shift;
+
+       my $compat;
+       my $lines_printed = 0;
+       my %pn_arg        = ();
+
+       return if (!$node or !$compatible);
+
+       # Do not process compatible property of root node,
+       # it is used to match board, not to bind a driver.
+       return if ($node eq "/");
+
+       $pn_arg{full_node}    = $full_node;
+       $pn_arg{node}         = $node;
+       $pn_arg{node_enabled} = $node_enabled;
+
+       my @compatibles = split('", "', $compatible);
+
+       $compatibles[0] =~ s/^"//;
+       $compatibles[$#compatibles] =~ s/"$//;
+
+       $pn_arg{compatible_cnt} = $#compatibles + 1;
+
+       COMPAT:
+       for $compat (@compatibles) {
+
+               $pn_arg{compat}     = $compat;
+               $pn_arg{driver_cnt} = 0;
+               $pn_arg{white_list} = 0;
+
+               if (exists($compat_white_list{$compat})) {
+                       $pn_arg{white_list} = 1;
+                       $pn_arg{driver}     = "no_driver";
+                       $pn_arg{config_cnt} = 1;
+                       $pn_arg{config}     = "no_config";
+                       $lines_printed += &print_node(\%pn_arg);
+                       next COMPAT;
+               }
+
+               # ----- if compat previously seen, use cached info
+
+               if (exists($compat_driver{$compat})) {
+                       for my $driver (@{ $compat_driver{$compat} }) {
+                               $pn_arg{driver}     = $driver;
+                               $pn_arg{driver_cnt} = $driver_count{$compat};
+                               $pn_arg{config_cnt} = $#{ $driver_config{$driver}} + 1;
+
+                               for my $config (@{ $driver_config{$driver} }) {
+                                       $pn_arg{config} = $config;
+                                       $lines_printed += &print_node(\%pn_arg);
+                               }
+
+                               if (!@{ $driver_config{$driver} }) {
+                                       # no config cached yet
+                                       # $driver in %driver_hard_code_list
+                                       # but not %driver_config_hard_code_list
+                                       $lines_printed += &find_kconfig(\%pn_arg, $driver);
+                               }
+                       }
+                       next COMPAT;
+               }
+
+
+               # ----- Find drivers (source files that contain compatible)
+
+               # this will miss arch/sparc/include/asm/parport.h
+               # It is better to move the compatible out of the .h
+               # than to add *.h. to the files list, because *.h generates
+               # a lot of false negatives.
+               my $files = '"*.c"';
+               my $drivers = `git grep -l '"$compat"' -- $files`;
+               chomp($drivers);
+               if ($drivers eq "") {
+                       $pn_arg{driver} = "no_driver";
+                       $pn_arg{config_cnt} = 1;
+                       $pn_arg{config} = "no_config";
+                       push @{ $compat_driver{$compat} }, "no_driver";
+                       $lines_printed += &print_node(\%pn_arg);
+                       next COMPAT;
+               }
+
+               my @drivers = split("\n", $drivers);
+               $driver_count{$compat} = $#drivers + 1;
+               $pn_arg{driver_cnt}    = $#drivers + 1;
+
+               DRIVER:
+               for my $driver (@drivers) {
+                       push @{ $compat_driver{$compat} }, $driver;
+                       $pn_arg{driver} = $driver;
+
+                       # ----- if driver previously seen, use cached info
+
+                       $pn_arg{config_cnt} = $#{ $driver_config{$driver} } + 1;
+                       for my $config (@{ $driver_config{$driver} }) {
+                               $pn_arg{config} = $config;
+                               $lines_printed += &print_node(\%pn_arg);
+                       }
+                       if (@{ $driver_config{$driver} }) {
+                               next DRIVER;
+                       }
+
+                       if ($black_list_driver) {
+                               for $black (@black_list_driver) {
+                                       next DRIVER if ($driver =~ /^$black$/);
+                               }
+                       }
+
+
+                       # ----- Find Kconfig symbols that enable driver
+
+                       $lines_printed += &find_kconfig(\%pn_arg, $driver);
+
+               }
+       }
+
+       # White space (line) between nodes for readability.
+       # Each node may report several compatibles.
+       # For each compatible, multiple drivers may be reported.
+       # For each driver, multiple CONFIG_ options may be reported.
+       if ($lines_printed) {
+               print "\n";
+       }
+}
+
+sub read_dts()
+{
+       my $file         = shift;
+
+       my $compatible   = "";
+       my $line;
+       my $node         = "";
+       my $node_enabled = "";
+
+       if (! -r $file) {
+               print STDERR "file '$file' is not readable or does not exist\n";
+               exit 3;
+       }
+
+       if (!open(DT_FILE, "-|", "$dtx_diff $file")) {
+               print STDERR "\n";
+               print STDERR "shell command failed:\n";
+               print STDERR "   $dtx_diff $file\n";
+               print STDERR "\n";
+               exit 3;
+       }
+
+       FILE:
+       while ($line = <DT_FILE>) {
+               chomp($line);
+
+               if ($line =~ /{/) {
+
+                       &handle_compatible($full_node, $node, $compatible,
+                                          $node_enabled);
+
+                       while ($end_node_count-- > 0) {
+                               pop @full_node;
+                       };
+                       $end_node_count = 0;
+                       $full_node = @full_node[-1];
+
+                       $node = $line;
+                       $node =~ s/^\s*(.*)\s+\{.*/$1/;
+                       $node =~ s/.*: //;
+                       if ($node eq '/' ) {
+                               $full_node = '/';
+                       } elsif ($full_node ne '/') {
+                               $full_node = $full_node . '/' . $node;
+                       } else {
+                               $full_node = '/' . $node;
+                       }
+                       push @full_node, $full_node;
+
+                       $compatible = "";
+                       $node_enabled = "";
+                       next FILE;
+               }
+
+               if ($line =~ /}/) {
+                       $end_node_count++;
+               }
+
+               if ($line =~ /(\s+|^)status =/) {
+                       $node_enabled = $line;
+                       $node_enabled =~ s/^\t*//;
+                       $node_enabled =~ s/^status = "//;
+                       $node_enabled =~ s/";$//;
+                       next FILE;
+               }
+
+               if ($line =~ /(\s+|^)compatible =/) {
+                       # Extract all compatible entries for this device
+                       # White space matching here and in handle_compatible() is
+                       # precise, because input format is the output of dtc,
+                       # which is invoked by dtx_diff.
+                       $compatible = $line;
+                       $compatible =~ s/^\t*//;
+                       $compatible =~ s/^compatible = //;
+                       $compatible =~ s/;$//;
+               }
+       }
+
+       &handle_compatible($full_node, $node, $compatible, $node_enabled);
+
+       close(DT_FILE);
+}
+
+
+sub read_config_file()
+{
+       if (! -r $config_file) {
+               print STDERR "file '$config_file' is not readable or does not exist\n";
+               exit 2;
+       }
+
+       if (!open(CONFIG_FILE, "<", "$config_file")) {
+               print STDERR "open $config_file failed\n";
+               exit 2;
+       }
+
+       my @line;
+
+       LINE:
+       while ($line = <CONFIG_FILE>) {
+               chomp($line);
+               next LINE if ($line =~ /^\s*#/);
+               next LINE if ($line =~ /^\s*$/);
+               @line = split /=/, $line;
+               $existing_config{@line[0]} = @line[1];
+       }
+
+       close(CONFIG_FILE);
+}
+
+
+sub cmd_line_err()
+{
+       my $msg = shift;
+
+       print STDERR "\n";
+       print STDERR "   ERROR processing command line options\n";
+       print STDERR "         $msg\n" if ($msg ne "");
+       print STDERR "\n";
+       print STDERR "   For help, type '$script_name --help'\n";
+       print STDERR "\n";
+}
+
+
+# -----------------------------------------------------------------------------
+# program entry point
+
+Getopt::Long::Configure("no_ignore_case", "bundling");
+
+if (!GetOptions(
+       "c=s"               => \$config_file,
+       "config=s"          => \$config_file,
+       "config-format"     => \$config_format,
+       "exclude-flag=s"    => \@exclude_flag,
+       "h"                 => \$help,
+       "help"              => \$help,
+       "black-list-driver" => \$black_list_driver,
+       "white-list-config" => \$white_list_config,
+       "white-list-driver" => \$white_list_driver,
+       "include-flag=s"    => \@include_flag,
+       "include-suspect"   => \$include_suspect,
+       "short-name"        => \$short_name,
+       "show-lists"        => \$show_lists,
+       "version"           => \$version,
+       )) {
+
+       &cmd_line_err();
+
+       exit 1;
+}
+
+
+my $exit_after_messages = 0;
+
+if ($version) {
+       print STDERR "\n$script_name  $VUFX\n\n";
+       $exit_after_messages = 1;
+}
+
+
+if ($help) {
+       &usage;
+       $exit_after_messages = 1;
+}
+
+
+if ($show_lists) {
+
+       print "\n";
+       print "These compatibles are hard coded to have no driver.\n";
+       print "\n";
+       for my $compat (sort keys %compat_white_list) {
+               print "   $compat\n";
+       }
+
+
+       print "\n\n";
+       print "The driver for these compatibles is hard coded (white list).\n";
+       print "\n";
+       my $max_compat_len = 0;
+       for my $compat (sort keys %driver_hard_code_list) {
+               if (length $compat > $max_compat_len) {
+                       $max_compat_len = length $compat;
+               }
+       }
+       for my $compat (sort keys %driver_hard_code_list) {
+               if (($driver ne "hardcoded_no_driver") && ($driver ne "no_driver")) {
+                       my $first = 1;
+                       for my $driver (@{ $driver_hard_code_list{$compat} }) {
+                               if ($first) {
+                                       print "   $compat";
+                                       print " " x ($max_compat_len - length $compat);
+                                       $first = 0;
+                               } else {
+                                       print "   ", " " x $max_compat_len;
+                               }
+                               print "  $driver\n";
+                       }
+               }
+       }
+
+
+       print "\n\n";
+       print "The configuration option for these drivers is hard coded (white list).\n";
+       print "\n";
+       my $max_driver_len = 0;
+       for my $driver (sort keys %driver_config_hard_code_list) {
+               if (length $driver > $max_driver_len) {
+                       $max_driver_len = length $driver;
+               }
+       }
+       for my $driver (sort keys %driver_config_hard_code_list) {
+               if (($driver ne "hardcoded_no_driver") && ($driver ne "no_driver")) {
+                       my $first = 1;
+                       for my $config (@{ $driver_config_hard_code_list{$driver} }) {
+                               if ($first) {
+                                       print "   $driver";
+                                       print " " x ($max_driver_len - length $driver);
+                                       $first = 0;
+                               } else {
+                                       print "   ", " " x $max_driver_len;
+                               }
+                               print "  $config\n";
+                       }
+               }
+       }
+
+
+       print "\n\n";
+       print "These drivers are black listed.\n";
+       print "\n";
+       for my $driver (@black_list_driver) {
+               print "   $driver\n";
+       }
+
+       print "\n";
+
+       $exit_after_messages = 1;
+}
+
+
+if ($exit_after_messages) {
+       exit 0;
+}
+
+
+$exclude_flag_pattern = "[";
+for my $exclude_flag (@exclude_flag) {
+       $exclude_flag_pattern = $exclude_flag_pattern . $exclude_flag;
+}
+$exclude_flag_pattern = $exclude_flag_pattern . "]";
+# clean up if empty
+$exclude_flag_pattern =~ s/^\[\]$//;
+
+
+$include_flag_pattern = "[";
+for my $include_flag (@include_flag) {
+       $include_flag_pattern = $include_flag_pattern . $include_flag;
+}
+$include_flag_pattern = $include_flag_pattern . "]";
+# clean up if empty
+$include_flag_pattern =~ s/^\[\]$//;
+
+
+if ($exclude_flag_pattern) {
+       my $found = 0;
+       for $pr_flag_value (@pr_flag_value) {
+               if ($exclude_flag_pattern =~ m/$pr_flag_value/) {
+                       $found = 1;
+               }
+       }
+       if (!$found) {
+               &cmd_line_err("invalid value for FLAG in --exclude-flag\n");
+               exit 1
+       }
+}
+
+if ($include_flag_pattern) {
+       my $found = 0;
+       for $pr_flag_value (@pr_flag_value) {
+               if ($include_flag_pattern =~ m/$pr_flag_value/) {
+                       $found = 1;
+               }
+       }
+       if (!$found) {
+               &cmd_line_err("invalid value for FLAG in --include-flag\n");
+               exit 1
+       }
+}
+
+if ($include_suspect) {
+       $include_flag_pattern =~ s/\[//;
+       $include_flag_pattern =~ s/\]//;
+       $include_flag_pattern = "[" . $include_flag_pattern . "A-Z]";
+}
+
+if ($exclude_flag_pattern =~ m/$include_flag_pattern/) {
+       &cmd_line_err("the same flag appears in both --exclude-flag and --include-flag or --include-suspect\n");
+       exit 1
+}
+
+
+# ($#ARGV < 0) is valid for --help, --version
+if ($#ARGV < 0) {
+       &cmd_line_err("device-tree... is required");
+       exit 1
+}
+
+
+if ($config_file) {
+       &read_config_file();
+}
+
+
+# avoid pushing duplicates for this value
+$driver = "hardcoded_no_driver";
+for $config ( @{ $driver_config_hard_code_list{$driver} } ) {
+       push @{ $driver_config{$driver} }, $config;
+}
+
+if ($white_list_driver) {
+       for my $compat (keys %driver_hard_code_list) {
+               for my $driver (@{ $driver_hard_code_list{$compat} }) {
+                       push @{ $compat_driver{$compat} }, $driver;
+                       if ($driver ne "hardcoded_no_driver") {
+                               $driver_count{$compat} = scalar @{ $compat_driver{$compat} };
+                       }
+               }
+       }
+}
+
+if ($white_list_config) {
+       for my $driver (keys %driver_config_hard_code_list) {
+               if ($driver ne "hardcoded_no_driver") {
+                       for $config ( @{ $driver_config_hard_code_list{$driver} } ) {
+                               push @{ $driver_config{$driver} }, $config;
+                       }
+               }
+       }
+}
+
+if (-x "scripts/dtc/dtx_diff") {
+       $dtx_diff = "scripts/dtc/dtx_diff";
+} else {
+
+       print STDERR "\n";
+       print STDERR "$script_name must be run from the root directory of a Linux kernel tree\n";
+       print STDERR "\n";
+       exit 3;
+}
+
+for $file (@ARGV) {
+       &read_dts($file);
+}

scripts/dtc/dtx_diff

@@ -266,7 +266,7 @@ DTC="${__KBUILD_OUTPUT}/scripts/dtc/dtc"
 
 if [ ! -x ${DTC} ] ; then
 	__DTC="dtc"
-	if grep -q "^CONFIG_DTC=y" ${__KBUILD_OUTPUT}/.config ; then
+	if grep -q "^CONFIG_DTC=y" ${__KBUILD_OUTPUT}/.config 2>/dev/null; then
 		make_command='
          make scripts'
 	else