Commit f658137c authored by Shannon Nelson's avatar Shannon Nelson Committed by Jeff Kirsher

i40e: implement and use Rx CTL helper functions

Use the new AdminQ functions for safely accessing the Rx control
registers that may be affected by heavy small packet traffic.

Change-ID: Ibb00983e8dcba71f4b760222a609a5fcaa726f18
Signed-off-by: default avatarShannon Nelson <shannon.nelson@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 33365143
......@@ -1328,7 +1328,7 @@ void i40e_clear_hw(struct i40e_hw *hw)
num_vf_int = (val & I40E_GLPCI_CNF2_MSI_X_VF_N_MASK) >>
I40E_GLPCI_CNF2_MSI_X_VF_N_SHIFT;
val = rd32(hw, I40E_PFLAN_QALLOC);
val = i40e_read_rx_ctl(hw, I40E_PFLAN_QALLOC);
base_queue = (val & I40E_PFLAN_QALLOC_FIRSTQ_MASK) >>
I40E_PFLAN_QALLOC_FIRSTQ_SHIFT;
j = (val & I40E_PFLAN_QALLOC_LASTQ_MASK) >>
......@@ -3882,7 +3882,7 @@ i40e_status i40e_set_filter_control(struct i40e_hw *hw,
return ret;
/* Read the PF Queue Filter control register */
val = rd32(hw, I40E_PFQF_CTL_0);
val = i40e_read_rx_ctl(hw, I40E_PFQF_CTL_0);
/* Program required PE hash buckets for the PF */
val &= ~I40E_PFQF_CTL_0_PEHSIZE_MASK;
......@@ -3919,7 +3919,7 @@ i40e_status i40e_set_filter_control(struct i40e_hw *hw,
if (settings->enable_macvlan)
val |= I40E_PFQF_CTL_0_MACVLAN_ENA_MASK;
wr32(hw, I40E_PFQF_CTL_0, val);
i40e_write_rx_ctl(hw, I40E_PFQF_CTL_0, val);
return 0;
}
......@@ -4575,3 +4575,125 @@ i40e_status i40e_led_set_phy(struct i40e_hw *hw, bool on,
phy_addr, led_ctl);
return status;
}
/**
* i40e_aq_rx_ctl_read_register - use FW to read from an Rx control register
* @hw: pointer to the hw struct
* @reg_addr: register address
* @reg_val: ptr to register value
* @cmd_details: pointer to command details structure or NULL
*
* Use the firmware to read the Rx control register,
* especially useful if the Rx unit is under heavy pressure
**/
i40e_status i40e_aq_rx_ctl_read_register(struct i40e_hw *hw,
u32 reg_addr, u32 *reg_val,
struct i40e_asq_cmd_details *cmd_details)
{
struct i40e_aq_desc desc;
struct i40e_aqc_rx_ctl_reg_read_write *cmd_resp =
(struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw;
i40e_status status;
if (!reg_val)
return I40E_ERR_PARAM;
i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_rx_ctl_reg_read);
cmd_resp->address = cpu_to_le32(reg_addr);
status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
if (status == 0)
*reg_val = le32_to_cpu(cmd_resp->value);
return status;
}
/**
* i40e_read_rx_ctl - read from an Rx control register
* @hw: pointer to the hw struct
* @reg_addr: register address
**/
u32 i40e_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr)
{
i40e_status status = 0;
bool use_register;
int retry = 5;
u32 val = 0;
use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
if (!use_register) {
do_retry:
status = i40e_aq_rx_ctl_read_register(hw, reg_addr, &val, NULL);
if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) {
usleep_range(1000, 2000);
retry--;
goto do_retry;
}
}
/* if the AQ access failed, try the old-fashioned way */
if (status || use_register)
val = rd32(hw, reg_addr);
return val;
}
/**
* i40e_aq_rx_ctl_write_register
* @hw: pointer to the hw struct
* @reg_addr: register address
* @reg_val: register value
* @cmd_details: pointer to command details structure or NULL
*
* Use the firmware to write to an Rx control register,
* especially useful if the Rx unit is under heavy pressure
**/
i40e_status i40e_aq_rx_ctl_write_register(struct i40e_hw *hw,
u32 reg_addr, u32 reg_val,
struct i40e_asq_cmd_details *cmd_details)
{
struct i40e_aq_desc desc;
struct i40e_aqc_rx_ctl_reg_read_write *cmd =
(struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw;
i40e_status status;
i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_rx_ctl_reg_write);
cmd->address = cpu_to_le32(reg_addr);
cmd->value = cpu_to_le32(reg_val);
status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
return status;
}
/**
* i40e_write_rx_ctl - write to an Rx control register
* @hw: pointer to the hw struct
* @reg_addr: register address
* @reg_val: register value
**/
void i40e_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val)
{
i40e_status status = 0;
bool use_register;
int retry = 5;
use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
if (!use_register) {
do_retry:
status = i40e_aq_rx_ctl_write_register(hw, reg_addr,
reg_val, NULL);
if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) {
usleep_range(1000, 2000);
retry--;
goto do_retry;
}
}
/* if the AQ access failed, try the old-fashioned way */
if (status || use_register)
wr32(hw, reg_addr, reg_val);
}
......@@ -342,6 +342,14 @@ i40e_status i40e_aq_debug_dump(struct i40e_hw *hw, u8 cluster_id,
struct i40e_asq_cmd_details *cmd_details);
void i40e_add_filter_to_drop_tx_flow_control_frames(struct i40e_hw *hw,
u16 vsi_seid);
i40e_status i40e_aq_rx_ctl_read_register(struct i40e_hw *hw,
u32 reg_addr, u32 *reg_val,
struct i40e_asq_cmd_details *cmd_details);
u32 i40e_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr);
i40e_status i40e_aq_rx_ctl_write_register(struct i40e_hw *hw,
u32 reg_addr, u32 reg_val,
struct i40e_asq_cmd_details *cmd_details);
void i40e_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val);
i40e_status i40e_read_phy_register(struct i40e_hw *hw, u8 page,
u16 reg, u8 phy_addr, u16 *value);
i40e_status i40e_write_phy_register(struct i40e_hw *hw, u8 page,
......
......@@ -903,6 +903,131 @@ struct i40e_rx_ptype_decoded i40evf_ptype_lookup[] = {
I40E_PTT_UNUSED_ENTRY(255)
};
/**
* i40evf_aq_rx_ctl_read_register - use FW to read from an Rx control register
* @hw: pointer to the hw struct
* @reg_addr: register address
* @reg_val: ptr to register value
* @cmd_details: pointer to command details structure or NULL
*
* Use the firmware to read the Rx control register,
* especially useful if the Rx unit is under heavy pressure
**/
i40e_status i40evf_aq_rx_ctl_read_register(struct i40e_hw *hw,
u32 reg_addr, u32 *reg_val,
struct i40e_asq_cmd_details *cmd_details)
{
struct i40e_aq_desc desc;
struct i40e_aqc_rx_ctl_reg_read_write *cmd_resp =
(struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw;
i40e_status status;
if (!reg_val)
return I40E_ERR_PARAM;
i40evf_fill_default_direct_cmd_desc(&desc,
i40e_aqc_opc_rx_ctl_reg_read);
cmd_resp->address = cpu_to_le32(reg_addr);
status = i40evf_asq_send_command(hw, &desc, NULL, 0, cmd_details);
if (status == 0)
*reg_val = le32_to_cpu(cmd_resp->value);
return status;
}
/**
* i40evf_read_rx_ctl - read from an Rx control register
* @hw: pointer to the hw struct
* @reg_addr: register address
**/
u32 i40evf_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr)
{
i40e_status status = 0;
bool use_register;
int retry = 5;
u32 val = 0;
use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
if (!use_register) {
do_retry:
status = i40evf_aq_rx_ctl_read_register(hw, reg_addr,
&val, NULL);
if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) {
usleep_range(1000, 2000);
retry--;
goto do_retry;
}
}
/* if the AQ access failed, try the old-fashioned way */
if (status || use_register)
val = rd32(hw, reg_addr);
return val;
}
/**
* i40evf_aq_rx_ctl_write_register
* @hw: pointer to the hw struct
* @reg_addr: register address
* @reg_val: register value
* @cmd_details: pointer to command details structure or NULL
*
* Use the firmware to write to an Rx control register,
* especially useful if the Rx unit is under heavy pressure
**/
i40e_status i40evf_aq_rx_ctl_write_register(struct i40e_hw *hw,
u32 reg_addr, u32 reg_val,
struct i40e_asq_cmd_details *cmd_details)
{
struct i40e_aq_desc desc;
struct i40e_aqc_rx_ctl_reg_read_write *cmd =
(struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw;
i40e_status status;
i40evf_fill_default_direct_cmd_desc(&desc,
i40e_aqc_opc_rx_ctl_reg_write);
cmd->address = cpu_to_le32(reg_addr);
cmd->value = cpu_to_le32(reg_val);
status = i40evf_asq_send_command(hw, &desc, NULL, 0, cmd_details);
return status;
}
/**
* i40evf_write_rx_ctl - write to an Rx control register
* @hw: pointer to the hw struct
* @reg_addr: register address
* @reg_val: register value
**/
void i40evf_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val)
{
i40e_status status = 0;
bool use_register;
int retry = 5;
use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
if (!use_register) {
do_retry:
status = i40evf_aq_rx_ctl_write_register(hw, reg_addr,
reg_val, NULL);
if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) {
usleep_range(1000, 2000);
retry--;
goto do_retry;
}
}
/* if the AQ access failed, try the old-fashioned way */
if (status || use_register)
wr32(hw, reg_addr, reg_val);
}
/**
* i40e_aq_send_msg_to_pf
* @hw: pointer to the hardware structure
......
......@@ -103,6 +103,14 @@ i40e_status i40e_aq_add_rem_control_packet_filter(struct i40e_hw *hw,
struct i40e_asq_cmd_details *cmd_details);
void i40e_add_filter_to_drop_tx_flow_control_frames(struct i40e_hw *hw,
u16 vsi_seid);
i40e_status i40evf_aq_rx_ctl_read_register(struct i40e_hw *hw,
u32 reg_addr, u32 *reg_val,
struct i40e_asq_cmd_details *cmd_details);
u32 i40evf_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr);
i40e_status i40evf_aq_rx_ctl_write_register(struct i40e_hw *hw,
u32 reg_addr, u32 reg_val,
struct i40e_asq_cmd_details *cmd_details);
void i40evf_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val);
i40e_status i40e_read_phy_register(struct i40e_hw *hw, u8 page,
u16 reg, u8 phy_addr, u16 *value);
i40e_status i40e_write_phy_register(struct i40e_hw *hw, u8 page,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment