Commit f684e4ac authored by Linus Walleij's avatar Linus Walleij

pinctrl: pinconf-generic: loose DT dependence

New pin controllers such as ACPI-based may also have custom properties
to parse, and should be able to use generic pin config. Let's make the
code compile on !OF systems and rename members a bit to underscore it
is custom parameters and not necessarily DT parameters.

This fixes a build regression for x86_64 on the zeroday kernel builds.
Reported-by: default avatarkbuild test robot <fengguang.wu@intel.com>
Reviewed-and-tested-by: default avatarSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 7382b623
......@@ -113,10 +113,11 @@ void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev, struct seq_file *s,
pinconf_generic_dump_one(pctldev, s, gname, pin, conf_items,
ARRAY_SIZE(conf_items));
/* driver-specific parameters */
if (pctldev->desc->num_dt_params && pctldev->desc->conf_items)
if (pctldev->desc->num_custom_params &&
pctldev->desc->custom_conf_items)
pinconf_generic_dump_one(pctldev, s, gname, pin,
pctldev->desc->conf_items,
pctldev->desc->num_dt_params);
pctldev->desc->custom_conf_items,
pctldev->desc->num_custom_params);
}
void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
......@@ -131,21 +132,24 @@ void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
pinconf_to_config_argument(config));
}
if (!pctldev->desc->num_dt_params || !pctldev->desc->conf_items)
if (!pctldev->desc->num_custom_params ||
!pctldev->desc->custom_conf_items)
return;
for (i = 0; i < pctldev->desc->num_dt_params; i++) {
if (pinconf_to_config_param(config) != pctldev->desc->conf_items[i].param)
for (i = 0; i < pctldev->desc->num_custom_params; i++) {
if (pinconf_to_config_param(config) !=
pctldev->desc->custom_conf_items[i].param)
continue;
seq_printf(s, "%s: 0x%x", pctldev->desc->conf_items[i].display,
pinconf_to_config_argument(config));
seq_printf(s, "%s: 0x%x",
pctldev->desc->custom_conf_items[i].display,
pinconf_to_config_argument(config));
}
}
EXPORT_SYMBOL_GPL(pinconf_generic_dump_config);
#endif
#ifdef CONFIG_OF
static const struct pinconf_generic_dt_params dt_params[] = {
static const struct pinconf_generic_params dt_params[] = {
{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
{ "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 },
{ "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 },
......@@ -170,9 +174,9 @@ static const struct pinconf_generic_dt_params dt_params[] = {
};
/**
* parse_dt_cfg - Parse DT pinconf parameters
* parse_dt_cfg() - Parse DT pinconf parameters
* @np: DT node
* @params: Array of describing DT parameters
* @params: Array of describing generic parameters
* @count: Number of entries in @params
* @cfg: Array of parsed config options
* @ncfg: Number of entries in @cfg
......@@ -183,7 +187,7 @@ static const struct pinconf_generic_dt_params dt_params[] = {
* needs to have enough memory allocated to hold all possible entries.
*/
static void parse_dt_cfg(struct device_node *np,
const struct pinconf_generic_dt_params *params,
const struct pinconf_generic_params *params,
unsigned int count, unsigned long *cfg,
unsigned int *ncfg)
{
......@@ -192,7 +196,7 @@ static void parse_dt_cfg(struct device_node *np,
for (i = 0; i < count; i++) {
u32 val;
int ret;
const struct pinconf_generic_dt_params *par = &params[i];
const struct pinconf_generic_params *par = &params[i];
ret = of_property_read_u32(np, par->property, &val);
......@@ -232,15 +236,16 @@ int pinconf_generic_parse_dt_config(struct device_node *np,
/* allocate a temporary array big enough to hold one of each option */
max_cfg = ARRAY_SIZE(dt_params);
if (pctldev)
max_cfg += pctldev->desc->num_dt_params;
max_cfg += pctldev->desc->num_custom_params;
cfg = kcalloc(max_cfg, sizeof(*cfg), GFP_KERNEL);
if (!cfg)
return -ENOMEM;
parse_dt_cfg(np, dt_params, ARRAY_SIZE(dt_params), cfg, &ncfg);
if (pctldev && pctldev->desc->num_dt_params && pctldev->desc->params)
parse_dt_cfg(np, pctldev->desc->params,
pctldev->desc->num_dt_params, cfg, &ncfg);
if (pctldev && pctldev->desc->num_custom_params &&
pctldev->desc->custom_params)
parse_dt_cfg(np, pctldev->desc->custom_params,
pctldev->desc->num_custom_params, cfg, &ncfg);
ret = 0;
......
......@@ -920,7 +920,7 @@ enum zynq_pin_config_param {
PIN_CONFIG_IOSTANDARD = PIN_CONFIG_END + 1,
};
static const struct pinconf_generic_dt_params zynq_dt_params[] = {
static const struct pinconf_generic_params zynq_dt_params[] = {
{"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
};
......@@ -1099,9 +1099,9 @@ static struct pinctrl_desc zynq_desc = {
.pctlops = &zynq_pctrl_ops,
.pmxops = &zynq_pinmux_ops,
.confops = &zynq_pinconf_ops,
.num_dt_params = ARRAY_SIZE(zynq_dt_params),
.params = zynq_dt_params,
.conf_items = zynq_conf_items,
.num_custom_params = ARRAY_SIZE(zynq_dt_params),
.custom_params = zynq_dt_params,
.custom_conf_items = zynq_conf_items,
.owner = THIS_MODULE,
};
......
......@@ -131,7 +131,7 @@ struct pmic_gpio_state {
struct gpio_chip chip;
};
static const struct pinconf_generic_dt_params pmic_gpio_bindings[] = {
static const struct pinconf_generic_params pmic_gpio_bindings[] = {
{"qcom,pull-up-strength", PMIC_GPIO_CONF_PULL_UP, 0},
{"qcom,drive-strength", PMIC_GPIO_CONF_STRENGTH, 0},
};
......@@ -742,9 +742,9 @@ static int pmic_gpio_probe(struct platform_device *pdev)
pctrldesc->name = dev_name(dev);
pctrldesc->pins = pindesc;
pctrldesc->npins = npins;
pctrldesc->num_dt_params = ARRAY_SIZE(pmic_gpio_bindings);
pctrldesc->params = pmic_gpio_bindings;
pctrldesc->conf_items = pmic_conf_items;
pctrldesc->num_custom_params = ARRAY_SIZE(pmic_gpio_bindings);
pctrldesc->custom_params = pmic_gpio_bindings;
pctrldesc->custom_conf_items = pmic_conf_items;
for (i = 0; i < npins; i++, pindesc++) {
pad = &pads[i];
......
......@@ -162,7 +162,7 @@ static inline unsigned long pinconf_to_config_packed(enum pin_config_param param
struct pinctrl_dev;
struct pinctrl_map;
struct pinconf_generic_dt_params {
struct pinconf_generic_params {
const char * const property;
enum pin_config_param param;
u32 default_value;
......
......@@ -118,9 +118,12 @@ struct pinctrl_ops {
* @confops: pin config operations vtable, if you support pin configuration in
* your driver
* @owner: module providing the pin controller, used for refcounting
* @num_dt_params: Number of driver-specific DT parameters
* @params: List of DT parameters
* @conf_items: Information how to print @params in debugfs
* @num_custom_params: Number of driver-specific custom parameters to be parsed
* from the hardware description
* @custom_params: List of driver_specific custom parameters to be parsed from
* the hardware description
* @custom_conf_items: Information how to print @params in debugfs, must be
* the same size as the @custom_params, i.e. @num_custom_params
*/
struct pinctrl_desc {
const char *name;
......@@ -130,10 +133,10 @@ struct pinctrl_desc {
const struct pinmux_ops *pmxops;
const struct pinconf_ops *confops;
struct module *owner;
#if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_OF)
unsigned int num_dt_params;
const struct pinconf_generic_dt_params *params;
const struct pin_config_item *conf_items;
#ifdef CONFIG_GENERIC_PINCONF
unsigned int num_custom_params;
const struct pinconf_generic_params *custom_params;
const struct pin_config_item *custom_conf_items;
#endif
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment