Merge tag 'qcom-arm64-for-4.12' of...

Merge tag 'qcom-arm64-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64

Qualcomm ARM64 Updates for v4.12

* Fixup MSM8996 SMP2P and add ADSP PIL / SLPI SMP2P node
* Replace PMU compatible w/ A53 specific one
* Add APQ8016 ramoops
* Update MSM8916 hexagon node
* Add PM8994 RTC

* tag 'qcom-arm64-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: msm8996: Add ADSP PIL node
  arm64: dts: qcom: pm8994: Add rtc node
  arm64: dts: apq8016-sbc: Add ramoops
  arm64: dts: qcom: msm8916: Update hexagon node
  arm64: dts: msm8996: Add SLPI SMP2P dt node.
  arm64: dts: qcom: Replace PMU compatible with a53 specific one
  arm64: dts: qcom: msm8996: Fixup smp2p node
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -35,6 +35,17 @@ chosen {
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		ramoops@bff00000{
+			compatible = "ramoops";
+			reg = <0x0 0xbff00000 0x0 0x100000>;
+
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x20000>;
+		};
+	};
+
 	soc {
 		dma@7884000 {
 			status = "okay";

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -157,7 +157,7 @@ psci {
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
 	};
 
@@ -833,8 +833,9 @@ hexagon@4080000 {
 
 			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
 				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
-				 <&gcc GCC_BOOT_ROM_AHB_CLK>;
-			clock-names = "iface", "bus", "mem";
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
 
 			qcom,smem-states = <&hexagon_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
@@ -842,6 +843,7 @@ hexagon@4080000 {
 			resets = <&scm 0>;
 			reset-names = "mss_restart";
 
+			cx-supply = <&pm8916_s1>;
 			mx-supply = <&pm8916_l3>;
 			pll-supply = <&pm8916_l7>;
 
@@ -856,6 +858,16 @@ mba {
 			mpss {
 				memory-region = <&mpss_mem>;
 			};
+
+			smd-edge {
+				interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,smd-edge = <0>;
+				qcom,ipc = <&apcs 8 12>;
+				qcom,remote-pid = <1>;
+
+				label = "hexagon";
+			};
 		};
 
 		pronto: wcnss@a21b000 {
@@ -1214,14 +1226,6 @@ smd_rpm_regulators: pm8916-regulators {
 				};
 			};
 		};
-
-		hexagon {
-			interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,smd-edge = <0>;
-			qcom,ipc = <&apcs 8 12>;
-			qcom,remote-pid = <1>;
-		};
 	};
 
 	hexagon-smp2p {

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -534,6 +534,26 @@ mmcc: clock-controller@8c0000 {
 		};
 	};
 
+	adsp-pil {
+		compatible = "qcom,msm8996-adsp-pil";
+
+		interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready",
+				  "handover", "stop-ack";
+
+		clocks = <&xo_board>;
+		clock-names = "xo";
+
+		memory-region = <&adsp_region>;
+
+		qcom,smem-states = <&adsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+	};
+
 	adsp-smp2p {
 		compatible = "qcom,smp2p";
 		qcom,smem = <443>, <429>;
@@ -547,7 +567,7 @@ adsp-smp2p {
 
 		adsp_smp2p_out: master-kernel {
 			qcom,entry-name = "master-kernel";
-			#qcom,state-cells = <1>;
+			#qcom,smem-state-cells = <1>;
 		};
 
 		adsp_smp2p_in: slave-kernel {
@@ -557,5 +577,29 @@ adsp_smp2p_in: slave-kernel {
 			#interrupt-cells = <2>;
 		};
 	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 16 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
 };
 #include "msm8996-pins.dtsi"

arch/arm64/boot/dts/qcom/pm8994.dtsi

@@ -9,6 +9,13 @@ pmic@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		pm8994_gpios: gpios@c000 {
 			compatible = "qcom,pm8994-gpio";
 			reg = <0xc000>;