Skip to content

L
linux
Commit f6cfb905 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'sunxi-dt64-for-4.20' of... 

Merge tag 'sunxi-dt64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Allwinner arm64 DT changes for 4.20

Our usual set of DT changes for the arm64 Allwinner SoCs.

The most notable things are:
  - HDMI support on the A64
  - New boards: OrangePi One Plus

* tag 'sunxi-dt64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (28 commits)
  arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay
  arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
  arm64: dts: allwinner: a64: Add display pipeline
  arm64: dts: allwinner: h6: add system controller device tree node
  arm64: dts: allwinner: h6: Add OrangePi One Plus initial support
  arm64: dts: allwinner: a64: Rename r_i2c_pins_a label to r_i2c_pl89_pins
  arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins
  arm64: dts: allwinner: a64: Split out data strobe pin from mmc2 pinmux
  arm64: dts: allwinner: a64: NanoPi-A64: Add blue status LED
  arm64: dts: allwinner: a64: NanoPi-A64: Add Wifi chip
  arm64: dts: allwinner: a64: NanoPi-A64: Add Ethernet
  arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage
  arm64: dts: allwinner: a64: Olinuxino: enable USB
  arm64: dts: allwinner: a64: Olinuxino: add Ethernet nodes
  arm64: dts: allwinner: a64: Olinuxino: fix DRAM voltage
  arm64: dts: allwinner: a64: Orange Pi Win: Adjust CSI power rails
  arm64: dts: allwinner: a64: Orange Pi Win: Add SPI flash node
  arm64: dts: allwinner: a64: Orange Pi Win: Add SDIO node
  arm64: dts: allwinner: a64: Orange Pi Win: Add LED node
  arm64: dts: allwinner: a64: Orange Pi Win: Add UARTs
  ...
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 26220da2 67929449
Hide whitespace changes
Inline Side-by-side
Showing with 812 additions and 27 deletions
arch/arm64/boot/dts/allwinner/Makefile
View file @ f6cfb905
......@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
......@@ -17,4 +18,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
View file @ f6cfb905
......@@ -203,7 +203,7 @@ &reg_rtc_ldo {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
View file @ f6cfb905
......@@ -60,6 +60,17 @@ chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
......@@ -86,6 +97,10 @@ wifi_pwrseq: wifi_pwrseq {
};
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
......@@ -103,6 +118,17 @@ &emac {
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
......@@ -151,7 +177,7 @@ brcmf: wifi@1 {
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
......@@ -302,7 +328,7 @@ &simplefb_hdmi {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
View file @ f6cfb905
......@@ -51,12 +51,44 @@ / {
compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
blue {
label = "nanopi-a64:blue:status";
gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
};
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc 1>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
&de {
status = "okay";
};
&ehci0 {
......@@ -67,6 +99,26 @@ &ehci1 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dcdc1>;
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
/* i2c1 connected with gpio headers like pine64, bananapi */
&i2c1 {
pinctrl-names = "default";
......@@ -78,6 +130,13 @@ &i2c1_pins {
bias-pull-up;
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <7>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
......@@ -88,6 +147,24 @@ &mmc0 {
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
rtl8189etv: wifi@1 {
reg = <1>;
interrupt-parent = <&r_pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
interrupt-names = "host-wake";
};
};
&ohci0 {
status = "okay";
};
......@@ -125,9 +202,9 @@ &reg_aldo3 {
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
......@@ -201,7 +278,7 @@ &simplefb_hdmi {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
View file @ f6cfb905
......@@ -51,6 +51,7 @@ / {
compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
......@@ -58,12 +59,74 @@ chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
status = "okay";
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dcdc1>;
allwinner,tx-delay-ps = <600>;
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
......@@ -92,6 +155,14 @@ rtl8723bs: wifi@1 {
};
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&r_rsb {
status = "okay";
......@@ -100,6 +171,7 @@ axp803: pmic@3a3 {
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
......@@ -142,10 +214,14 @@ &reg_dcdc2 {
/* DCDC3 is polyphased with DCDC2 */
/*
* The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
* 1.35V that the PMIC can drive.
*/
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-min-microvolt = <1360000>;
regulator-max-microvolt = <1360000>;
regulator-name = "vcc-ddr3";
};
......@@ -180,6 +256,11 @@ &reg_dldo4 {
regulator-name = "vcc-wifi-io";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
......@@ -220,6 +301,18 @@ &simplefb_hdmi {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
status = "okay";
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
};
arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
View file @ f6cfb905
/*
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
* Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -51,23 +52,127 @@ / {
compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
status {
label = "orangepi:green:status";
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
};
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
status = "okay";
};
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
status = "okay";
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
};
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_gmac_3v3>;
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
disable-wp;
bus-width = <4>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_dldo2>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
&ohci0 {
status = "okay";
};
......@@ -89,9 +194,8 @@ axp803: pmic@3a3 {
#include "axp803.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "afvcc-csi";
};
......@@ -163,12 +267,23 @@ &reg_dldo4 {
regulator-name = "vcc-wifi-io";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
&reg_eldo3 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1800000>;
regulator-name = "dvdd-csi";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
......@@ -195,13 +310,61 @@ &simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
&spi0 {
status = "okay";
spi-flash@0 {
compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
m25p,fast-read;
status = "okay";
};
};
/* On debug connector */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&usbphy {
/* Bluetooth */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
/* On Pi-2 connector, RTS/CTS optional */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
/* On Pi-2 connector, RTS/CTS optional */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "disabled";
};
/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
status = "disabled";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts 0 → 100644
View file @ f6cfb905
/*
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*
* Copyright (c) 2018 ARM Ltd.
*/
#include "sun50i-a64-sopine-baseboard.dts"
/ {
model = "Pine64 LTS";
compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
"allwinner,sun50i-a64";
};
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
View file @ f6cfb905
......@@ -62,6 +62,21 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
};
&de {
status = "okay";
};
&ehci0 {
......@@ -82,6 +97,17 @@ &emac {
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
......@@ -241,7 +267,7 @@ &spdif {
/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
View file @ f6cfb905
......@@ -80,8 +80,7 @@ &mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
disable-wp;
bus-width = <4>;
status = "okay";
......@@ -104,7 +103,7 @@ rtl8723cs: wifi@1 {
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_eldo1>;
bus-width = <8>;
......@@ -143,7 +142,7 @@ axp803: pmic@3a3 {
&r_i2c {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&r_i2c_pins_a>;
pinctrl-0 = <&r_i2c_pl89_pins>;
status = "okay";
};
......@@ -270,7 +269,7 @@ &simplefb_hdmi {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
View file @ f6cfb905
......@@ -61,6 +61,17 @@ chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
reg_vcc1v8: vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8";
......@@ -69,6 +80,10 @@ reg_vcc1v8: vcc1v8 {
};
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
......@@ -86,6 +101,17 @@ &emac {
status = "okay";
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
......@@ -140,7 +166,7 @@ &simplefb_hdmi {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
View file @ f6cfb905
......@@ -260,7 +260,7 @@ &simplefb_hdmi {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
......
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
View file @ f6cfb905
......@@ -88,6 +88,7 @@ cpu0: cpu@0 {
device_type = "cpu";
reg = <0>;
enable-method = "psci";
next-level-cache = <&L2>;
};
cpu1: cpu@1 {
......@@ -95,6 +96,7 @@ cpu1: cpu@1 {
device_type = "cpu";
reg = <1>;
enable-method = "psci";
next-level-cache = <&L2>;
};
cpu2: cpu@2 {
......@@ -102,6 +104,7 @@ cpu2: cpu@2 {
device_type = "cpu";
reg = <2>;
enable-method = "psci";
next-level-cache = <&L2>;
};
cpu3: cpu@3 {
......@@ -109,7 +112,20 @@ cpu3: cpu@3 {
device_type = "cpu";
reg = <3>;
enable-method = "psci";
next-level-cache = <&L2>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
de: display-engine {
compatible = "allwinner,sun50i-a64-display-engine";
allwinner,pipelines = <&mixer0>,
<&mixer1>;
status = "disabled";
};
osc24M: osc24M_clk {
......@@ -194,6 +210,52 @@ display_clocks: clock@0 {
#clock-cells = <1>;
#reset-cells = <1>;
};
mixer0: mixer@100000 {
compatible = "allwinner,sun50i-a64-de2-mixer-0";
reg = <0x100000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER0>,
<&display_clocks CLK_MIXER0>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer0_out: port@1 {
reg = <1>;
mixer0_out_tcon0: endpoint {
remote-endpoint = <&tcon0_in_mixer0>;
};
};
};
};
mixer1: mixer@200000 {
compatible = "allwinner,sun50i-a64-de2-mixer-1";
reg = <0x200000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER1>,
<&display_clocks CLK_MIXER1>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer1_out: port@1 {
reg = <1>;
mixer1_out_tcon1: endpoint {
remote-endpoint = <&tcon1_in_mixer1>;
};
};
};
};
};
syscon: syscon@1c00000 {
......@@ -228,6 +290,75 @@ dma: dma-controller@1c02000 {
#dma-cells = <1>;
};
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun50i-a64-tcon-lcd",
"allwinner,sun8i-a83t-tcon-lcd";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-pixel-clock";
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon0_in_mixer0: endpoint@0 {
reg = <0>;
remote-endpoint = <&mixer0_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
tcon1: lcd-controller@1c0d000 {
compatible = "allwinner,sun50i-a64-tcon-tv",
"allwinner,sun8i-a83t-tcon-tv";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON1>;
reset-names = "lcd";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon1_in: port@0 {
reg = <0>;
tcon1_in_mixer1: endpoint {
remote-endpoint = <&mixer1_out_tcon1>;
};
};
tcon1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon1_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon1>;
};
};
};
};
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
......@@ -270,6 +401,11 @@ mmc2: mmc@1c11000 {
#size-cells = <0>;
};
sid: eeprom@1c14000 {
compatible = "allwinner,sun50i-a64-sid";
reg = <0x1c14000 0x400>;
};
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
......@@ -399,7 +535,7 @@ mmc1_pins: mmc1-pins {
};
mmc2_pins: mmc2-pins {
pins = "PC1", "PC5", "PC6", "PC8", "PC9",
pins = "PC5", "PC6", "PC8", "PC9",
"PC10","PC11", "PC12", "PC13",
"PC14", "PC15", "PC16";
function = "mmc2";
......@@ -407,6 +543,13 @@ mmc2_pins: mmc2-pins {
bias-pull-up;
};
mmc2_ds_pin: mmc2-ds-pin {
pins = "PC1";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
pwm_pin: pwm_pin {
pins = "PD22";
function = "pwm";
......@@ -442,7 +585,7 @@ spi1_pins: spi1 {
function = "spi1";
};
uart0_pins_a: uart0 {
uart0_pb_pins: uart0-pb-pins {
pins = "PB8", "PB9";
function = "uart0";
};
......@@ -686,6 +829,50 @@ pwm: pwm@1c21400 {
status = "disabled";
};
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun50i-a64-dw-hdmi",
"allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
<&ccu CLK_HDMI>;
clock-names = "iahb", "isfr", "tmds";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
phy-names = "hdmi-phy";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
reg = <0>;
hdmi_in_tcon1: endpoint {
remote-endpoint = <&tcon1_out_hdmi>;
};
};
hdmi_out: port@1 {
reg = <1>;
};
};
};
hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun50i-a64-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
<&ccu 7>;
clock-names = "bus", "mod", "pll-0";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
#phy-cells = <0>;
};
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
......@@ -749,7 +936,7 @@ r_pio: pinctrl@1f02c00 {
interrupt-controller;
#interrupt-cells = <3>;
r_i2c_pins_a: i2c-a {
r_i2c_pl89_pins: r-i2c-pl89-pins {
pins = "PL8", "PL9";
function = "s_i2c";
};
......
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts 0 → 100644
View file @ f6cfb905
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
/*
* Copyright (C) 2018 Amarula Solutions
* Author: Jagan Teki <jagan@amarulasolutions.com>
*/
/dts-v1/;
#include "sun50i-h6.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "OrangePi One Plus";
compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
&r_i2c {
status = "okay";
axp805: pmic@36 {
compatible = "x-powers,axp805", "x-powers,axp806";
reg = <0x36>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
x-powers,self-working-mode;
regulators {
reg_aldo1: aldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
reg_aldo2: aldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-ac200";
};
reg_aldo3: aldo3 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc25-dram";
};
reg_bldo1: bldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-bias-pll";
};
reg_bldo2: bldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-efuse-pcie-hdmi-io";
};
reg_bldo3: bldo3 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-dcxoio";
};
bldo4 {
/* unused */
};
reg_cldo1: cldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
reg_cldo2: cldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-1";
};
reg_cldo3: cldo3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-2";
};
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-cpu";
};
reg_dcdcc: dcdcc {
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-gpu";
};
reg_dcdcd: dcdcd {
regulator-always-on;
regulator-min-microvolt = <960000>;
regulator-max-microvolt = <960000>;
regulator-name = "vdd-sys";
};
reg_dcdce: dcdce {
regulator-always-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-dram";
};
sw {
/* unused */
};
};
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
View file @ f6cfb905
......@@ -92,6 +92,29 @@ soc {
#size-cells = <1>;
ranges;
syscon: syscon@3000000 {
compatible = "allwinner,sun50i-h6-system-control",
"allwinner,sun50i-a64-system-control";
reg = <0x03000000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
sram_c: sram@28000 {
compatible = "mmio-sram";
reg = <0x00028000 0x1e000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00028000 0x1e000>;
de2_sram: sram-section@0 {
compatible = "allwinner,sun50i-h6-sram-c",
"allwinner,sun50i-a64-sram-c";
reg = <0x0000 0x1e000>;
};
};
};
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7