Commit f6f2efa3 authored by Shiraz Hashim's avatar Shiraz Hashim Committed by Dmitry Torokhov

Input: spear_keyboard - rename bit definitions to reflect register

Rename bit definition macros to reflect keyboard registers clearly thus
being more readable.
Signed-off-by: default avatarShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent e99191f0
......@@ -27,7 +27,7 @@
#include <plat/keyboard.h>
/* Keyboard Registers */
#define MODE_REG 0x00
#define MODE_CTL_REG 0x00
#define STATUS_REG 0x0C
#define DATA_REG 0x10
#define INTR_MASK 0x54
......@@ -38,22 +38,23 @@
* control register as 1010010(82MHZ)
*/
#define PCLK_FREQ_MSK 0xA400 /* 82 MHz */
#define START_SCAN 0x0100
#define SCAN_RATE_10 0x0000
#define SCAN_RATE_20 0x0004
#define SCAN_RATE_40 0x0008
#define SCAN_RATE_80 0x000C
#define MODE_KEYBOARD 0x0002
#define DATA_AVAIL 0x2
#define KEY_MASK 0xFF000000
#define KEY_VALUE 0x00FFFFFF
#define ROW_MASK 0xF0
#define COLUMN_MASK 0x0F
#define NUM_ROWS 16
#define NUM_COLS 16
#define KEY_MATRIX_SHIFT 6
#define MODE_CTL_KEYBOARD (0x2 << 0)
#define MODE_CTL_SCAN_RATE_10 (0x0 << 2)
#define MODE_CTL_SCAN_RATE_20 (0x1 << 2)
#define MODE_CTL_SCAN_RATE_40 (0x2 << 2)
#define MODE_CTL_SCAN_RATE_80 (0x3 << 2)
#define MODE_CTL_KEYNUM_SHIFT 6
#define MODE_CTL_START_SCAN (0x1 << 8)
#define STATUS_DATA_AVAIL (0x1 << 1)
#define DATA_ROW_MASK 0xF0
#define DATA_COLUMN_MASK 0x0F
#define ROW_SHIFT 4
struct spear_kbd {
struct input_dev *input;
......@@ -75,7 +76,7 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
u32 sts, val;
sts = readl_relaxed(kbd->io_base + STATUS_REG);
if (!(sts & DATA_AVAIL))
if (!(sts & STATUS_DATA_AVAIL))
return IRQ_NONE;
if (kbd->last_key != KEY_RESERVED) {
......@@ -84,7 +85,8 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
}
/* following reads active (row, col) pair */
val = readl_relaxed(kbd->io_base + DATA_REG);
val = readl_relaxed(kbd->io_base + DATA_REG) &
(DATA_ROW_MASK | DATA_COLUMN_MASK);
key = kbd->keycodes[val];
input_event(input, EV_MSC, MSC_SCAN, val);
......@@ -112,15 +114,15 @@ static int spear_kbd_open(struct input_dev *dev)
return error;
/* program keyboard */
val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK |
(kbd->mode << KEY_MATRIX_SHIFT);
writel_relaxed(val, kbd->io_base + MODE_REG);
val = MODE_CTL_SCAN_RATE_80 | MODE_CTL_KEYBOARD | PCLK_FREQ_MSK |
(kbd->mode << MODE_CTL_KEYNUM_SHIFT);
writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
writel_relaxed(1, kbd->io_base + STATUS_REG);
/* start key scan */
val = readl_relaxed(kbd->io_base + MODE_REG);
val |= START_SCAN;
writel_relaxed(val, kbd->io_base + MODE_REG);
val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
val |= MODE_CTL_START_SCAN;
writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
return 0;
}
......@@ -131,9 +133,9 @@ static void spear_kbd_close(struct input_dev *dev)
u32 val;
/* stop key scan */
val = readl_relaxed(kbd->io_base + MODE_REG);
val &= ~START_SCAN;
writel_relaxed(val, kbd->io_base + MODE_REG);
val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
val &= ~MODE_CTL_START_SCAN;
writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
clk_disable(kbd->clk);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment