Commit f6ff49b8 authored by Anson Huang's avatar Anson Huang Committed by Jonathan Cameron

iio: accell: mma8452: add vdd/vddio regulator operation support

The accelerometer's power supply could be controllable on some
platforms, such as i.MX6Q-SABRESD board, the mma8451's power supplies
are controlled by a GPIO fixed regulator, need to make sure the
regulators are enabled before any communication with mma8451, this
patch adds vdd/vddio regulator operation support.
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
Acked-by: default avatarMartin Kepplinger <martink@posteo.de>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent a7b4f316
......@@ -31,6 +31,7 @@
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#define MMA8452_STATUS 0x00
#define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
......@@ -107,6 +108,8 @@ struct mma8452_data {
u8 data_cfg;
const struct mma_chip_info *chip_info;
int sleep_val;
struct regulator *vdd_reg;
struct regulator *vddio_reg;
};
/**
......@@ -1534,9 +1537,39 @@ static int mma8452_probe(struct i2c_client *client,
mutex_init(&data->lock);
data->chip_info = match->data;
data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
if (IS_ERR(data->vdd_reg)) {
if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER)
return -EPROBE_DEFER;
dev_err(&client->dev, "failed to get VDD regulator!\n");
return PTR_ERR(data->vdd_reg);
}
data->vddio_reg = devm_regulator_get(&client->dev, "vddio");
if (IS_ERR(data->vddio_reg)) {
if (PTR_ERR(data->vddio_reg) == -EPROBE_DEFER)
return -EPROBE_DEFER;
dev_err(&client->dev, "failed to get VDDIO regulator!\n");
return PTR_ERR(data->vddio_reg);
}
ret = regulator_enable(data->vdd_reg);
if (ret) {
dev_err(&client->dev, "failed to enable VDD regulator!\n");
return ret;
}
ret = regulator_enable(data->vddio_reg);
if (ret) {
dev_err(&client->dev, "failed to enable VDDIO regulator!\n");
goto disable_regulator_vdd;
}
ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
if (ret < 0)
return ret;
goto disable_regulators;
switch (ret) {
case MMA8451_DEVICE_ID:
......@@ -1549,7 +1582,8 @@ static int mma8452_probe(struct i2c_client *client,
break;
/* else: fall through */
default:
return -ENODEV;
ret = -ENODEV;
goto disable_regulators;
}
dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
......@@ -1566,13 +1600,13 @@ static int mma8452_probe(struct i2c_client *client,
ret = mma8452_reset(client);
if (ret < 0)
return ret;
goto disable_regulators;
data->data_cfg = MMA8452_DATA_CFG_FS_2G;
ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG,
data->data_cfg);
if (ret < 0)
return ret;
goto disable_regulators;
/*
* By default set transient threshold to max to avoid events if
......@@ -1581,7 +1615,7 @@ static int mma8452_probe(struct i2c_client *client,
ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS,
MMA8452_TRANSIENT_THS_MASK);
if (ret < 0)
return ret;
goto disable_regulators;
if (client->irq) {
int irq2;
......@@ -1595,7 +1629,7 @@ static int mma8452_probe(struct i2c_client *client,
MMA8452_CTRL_REG5,
data->chip_info->all_events);
if (ret < 0)
return ret;
goto disable_regulators;
dev_dbg(&client->dev, "using interrupt line INT1\n");
}
......@@ -1604,11 +1638,11 @@ static int mma8452_probe(struct i2c_client *client,
MMA8452_CTRL_REG4,
data->chip_info->enabled_events);
if (ret < 0)
return ret;
goto disable_regulators;
ret = mma8452_trigger_setup(indio_dev);
if (ret < 0)
return ret;
goto disable_regulators;
}
data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
......@@ -1661,12 +1695,19 @@ static int mma8452_probe(struct i2c_client *client,
trigger_cleanup:
mma8452_trigger_cleanup(indio_dev);
disable_regulators:
regulator_disable(data->vddio_reg);
disable_regulator_vdd:
regulator_disable(data->vdd_reg);
return ret;
}
static int mma8452_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct mma8452_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
......@@ -1678,6 +1719,9 @@ static int mma8452_remove(struct i2c_client *client)
mma8452_trigger_cleanup(indio_dev);
mma8452_standby(iio_priv(indio_dev));
regulator_disable(data->vddio_reg);
regulator_disable(data->vdd_reg);
return 0;
}
......@@ -1696,6 +1740,18 @@ static int mma8452_runtime_suspend(struct device *dev)
return -EAGAIN;
}
ret = regulator_disable(data->vddio_reg);
if (ret) {
dev_err(dev, "failed to disable VDDIO regulator\n");
return ret;
}
ret = regulator_disable(data->vdd_reg);
if (ret) {
dev_err(dev, "failed to disable VDD regulator\n");
return ret;
}
return 0;
}
......@@ -1705,9 +1761,22 @@ static int mma8452_runtime_resume(struct device *dev)
struct mma8452_data *data = iio_priv(indio_dev);
int ret, sleep_val;
ret = regulator_enable(data->vdd_reg);
if (ret) {
dev_err(dev, "failed to enable VDD regulator\n");
return ret;
}
ret = regulator_enable(data->vddio_reg);
if (ret) {
dev_err(dev, "failed to enable VDDIO regulator\n");
regulator_disable(data->vdd_reg);
return ret;
}
ret = mma8452_active(data);
if (ret < 0)
return ret;
goto runtime_resume_failed;
ret = mma8452_get_odr_index(data);
sleep_val = 1000 / mma8452_samp_freq[ret][0];
......@@ -1717,25 +1786,17 @@ static int mma8452_runtime_resume(struct device *dev)
msleep_interruptible(sleep_val);
return 0;
}
#endif
#ifdef CONFIG_PM_SLEEP
static int mma8452_suspend(struct device *dev)
{
return mma8452_standby(iio_priv(i2c_get_clientdata(
to_i2c_client(dev))));
}
runtime_resume_failed:
regulator_disable(data->vddio_reg);
regulator_disable(data->vdd_reg);
static int mma8452_resume(struct device *dev)
{
return mma8452_active(iio_priv(i2c_get_clientdata(
to_i2c_client(dev))));
return ret;
}
#endif
static const struct dev_pm_ops mma8452_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mma8452_suspend, mma8452_resume)
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(mma8452_runtime_suspend,
mma8452_runtime_resume, NULL)
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment