Commit f74ce8fb authored by Florian Vaussard's avatar Florian Vaussard Committed by Benoit Cousson

gpio/twl4030: get platform data from device tree

Adds a number of missing device tree properties for
twl4030/gpio, and update bindings:
- "ti,use-leds"  -> .use_leds
- "ti,debounce"  -> .debounce
- "ti,mmc-cd"    -> .mmc_cd
- "ti,pullups"   -> .pullups
- "ti,pulldowns" -> .pulldowns
Signed-off-by: default avatarFlorian Vaussard <florian.vaussard@epfl.ch>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Acked-by: default avatarVaibhav Hiremath <hvaibhav@ti.com>
[b-cousson@ti.com: Fix some checkpatch CHECK issues]
Signed-off-by: default avatarBenoit Cousson <b-cousson@ti.com>
parent 5635121e
......@@ -11,6 +11,11 @@ Required properties:
- interrupt-controller: Mark the device node as an interrupt controller
The first cell is the GPIO number.
The second cell is not used.
- ti,use-leds : Enables LEDA and LEDB outputs if set
- ti,debounce : if n-th bit is set, debounces GPIO-n
- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
Example:
......@@ -20,4 +25,5 @@ twl_gpio: gpio {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
ti,use-leds;
};
......@@ -395,6 +395,31 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
static int gpio_twl4030_remove(struct platform_device *pdev);
static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
{
struct twl4030_gpio_platform_data *omap_twl_info;
omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL);
if (!omap_twl_info)
return NULL;
omap_twl_info->gpio_base = -1;
omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
"ti,use-leds");
of_property_read_u32(dev->of_node, "ti,debounce",
&omap_twl_info->debounce);
of_property_read_u32(dev->of_node, "ti,mmc-cd",
(u32 *)&omap_twl_info->mmc_cd);
of_property_read_u32(dev->of_node, "ti,pullups",
&omap_twl_info->pullups);
of_property_read_u32(dev->of_node, "ti,pulldowns",
&omap_twl_info->pulldowns);
return omap_twl_info;
}
static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
{
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
......@@ -423,39 +448,42 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
twl4030_gpio_irq_base = irq_base;
no_irqs:
twl_gpiochip.base = -1;
twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
twl_gpiochip.dev = &pdev->dev;
if (pdata) {
twl_gpiochip.base = pdata->gpio_base;
if (node)
pdata = of_gpio_twl4030(&pdev->dev);
/*
* NOTE: boards may waste power if they don't set pullups
* and pulldowns correctly ... default for non-ULPI pins is
* pulldown, and some other pins may have external pullups
* or pulldowns. Careful!
*/
ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
if (ret)
dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
pdata->pullups, pdata->pulldowns,
ret);
ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
if (ret)
dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
pdata->debounce, pdata->mmc_cd,
ret);
/*
* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
* is (still) clear if use_leds is set.
*/
if (pdata->use_leds)
twl_gpiochip.ngpio += 2;
if (pdata == NULL) {
dev_err(&pdev->dev, "Platform data is missing\n");
return -ENXIO;
}
twl_gpiochip.base = pdata->gpio_base;
/*
* NOTE: boards may waste power if they don't set pullups
* and pulldowns correctly ... default for non-ULPI pins is
* pulldown, and some other pins may have external pullups
* or pulldowns. Careful!
*/
ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
if (ret)
dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
pdata->pullups, pdata->pulldowns, ret);
ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
if (ret)
dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
pdata->debounce, pdata->mmc_cd, ret);
/*
* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
* is (still) clear if use_leds is set.
*/
if (pdata->use_leds)
twl_gpiochip.ngpio += 2;
ret = gpiochip_add(&twl_gpiochip);
if (ret < 0) {
dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment