Skip to content

L
linux
Commit f7515d9f authored by Josh Poimboeuf's avatar Josh Poimboeuf Committed by Peter Zijlstra
Browse files
Options

objtool: Add objtool_types.h 

Reduce the amount of header sync churn by splitting the shared objtool.h
types into a new file.
Signed-off-by: default avatarJosh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/dec622720851210ceafa12d4f4c5f9e73c832152.1677683419.git.jpoimboe@kernel.org
parent b4c108d7
Hide whitespace changes
Inline Side-by-side
Showing with 102 additions and 246 deletions
MAINTAINERS
View file @ f7515d9f
......@@ -15090,8 +15090,8 @@ OBJTOOL
M: Josh Poimboeuf <jpoimboe@kernel.org>
M: Peter Zijlstra <peterz@infradead.org>
S: Supported
F: include/linux/objtool*.h
F: tools/objtool/
F: include/linux/objtool.h
OCELOT ETHERNET SWITCH DRIVER
M: Vladimir Oltean <vladimir.oltean@nxp.com>
......
include/linux/objtool.h
View file @ f7515d9f
......@@ -2,47 +2,7 @@
#ifndef _LINUX_OBJTOOL_H
#define _LINUX_OBJTOOL_H
#ifndef __ASSEMBLY__
#include <linux/types.h>
/*
* This struct is used by asm and inline asm code to manually annotate the
* location of registers on the stack.
*/
struct unwind_hint {
u32 ip;
s16 sp_offset;
u8 sp_reg;
u8 type;
u8 signal;
u8 end;
};
#endif
/*
* UNWIND_HINT_TYPE_CALL: Indicates that sp_reg+sp_offset resolves to PREV_SP
* (the caller's SP right before it made the call). Used for all callable
* functions, i.e. all C code and all callable asm functions.
*
* UNWIND_HINT_TYPE_REGS: Used in entry code to indicate that sp_reg+sp_offset
* points to a fully populated pt_regs from a syscall, interrupt, or exception.
*
* UNWIND_HINT_TYPE_REGS_PARTIAL: Used in entry code to indicate that
* sp_reg+sp_offset points to the iret return frame.
*
* UNWIND_HINT_FUNC: Generate the unwind metadata of a callable function.
* Useful for code which doesn't have an ELF function annotation.
*
* UNWIND_HINT_ENTRY: machine entry without stack, SYSCALL/SYSENTER etc.
*/
#define UNWIND_HINT_TYPE_CALL 0
#define UNWIND_HINT_TYPE_REGS 1
#define UNWIND_HINT_TYPE_REGS_PARTIAL 2
#define UNWIND_HINT_TYPE_FUNC 3
#define UNWIND_HINT_TYPE_ENTRY 4
#define UNWIND_HINT_TYPE_SAVE 5
#define UNWIND_HINT_TYPE_RESTORE 6
#include <linux/objtool_types.h>
#ifdef CONFIG_OBJTOOL
......
include/linux/objtool_types.h 0 → 100644
View file @ f7515d9f
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_OBJTOOL_TYPES_H
#define _LINUX_OBJTOOL_TYPES_H
#ifndef __ASSEMBLY__
#include <linux/types.h>
/*
* This struct is used by asm and inline asm code to manually annotate the
* location of registers on the stack.
*/
struct unwind_hint {
u32 ip;
s16 sp_offset;
u8 sp_reg;
u8 type;
u8 signal;
u8 end;
};
#endif /* __ASSEMBLY__ */
/*
* UNWIND_HINT_TYPE_CALL: Indicates that sp_reg+sp_offset resolves to PREV_SP
* (the caller's SP right before it made the call). Used for all callable
* functions, i.e. all C code and all callable asm functions.
*
* UNWIND_HINT_TYPE_REGS: Used in entry code to indicate that sp_reg+sp_offset
* points to a fully populated pt_regs from a syscall, interrupt, or exception.
*
* UNWIND_HINT_TYPE_REGS_PARTIAL: Used in entry code to indicate that
* sp_reg+sp_offset points to the iret return frame.
*
* UNWIND_HINT_FUNC: Generate the unwind metadata of a callable function.
* Useful for code which doesn't have an ELF function annotation.
*
* UNWIND_HINT_ENTRY: machine entry without stack, SYSCALL/SYSENTER etc.
*/
#define UNWIND_HINT_TYPE_CALL 0
#define UNWIND_HINT_TYPE_REGS 1
#define UNWIND_HINT_TYPE_REGS_PARTIAL 2
#define UNWIND_HINT_TYPE_FUNC 3
#define UNWIND_HINT_TYPE_ENTRY 4
#define UNWIND_HINT_TYPE_SAVE 5
#define UNWIND_HINT_TYPE_RESTORE 6
#endif /* _LINUX_OBJTOOL_TYPES_H */
tools/include/linux/objtool.h deleted 100644 → 0
View file @ b4c108d7
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_OBJTOOL_H
#define _LINUX_OBJTOOL_H
#ifndef __ASSEMBLY__
#include <linux/types.h>
/*
* This struct is used by asm and inline asm code to manually annotate the
* location of registers on the stack.
*/
struct unwind_hint {
u32 ip;
s16 sp_offset;
u8 sp_reg;
u8 type;
u8 signal;
u8 end;
};
#endif
/*
* UNWIND_HINT_TYPE_CALL: Indicates that sp_reg+sp_offset resolves to PREV_SP
* (the caller's SP right before it made the call). Used for all callable
* functions, i.e. all C code and all callable asm functions.
*
* UNWIND_HINT_TYPE_REGS: Used in entry code to indicate that sp_reg+sp_offset
* points to a fully populated pt_regs from a syscall, interrupt, or exception.
*
* UNWIND_HINT_TYPE_REGS_PARTIAL: Used in entry code to indicate that
* sp_reg+sp_offset points to the iret return frame.
*
* UNWIND_HINT_FUNC: Generate the unwind metadata of a callable function.
* Useful for code which doesn't have an ELF function annotation.
*
* UNWIND_HINT_ENTRY: machine entry without stack, SYSCALL/SYSENTER etc.
*/
#define UNWIND_HINT_TYPE_CALL 0
#define UNWIND_HINT_TYPE_REGS 1
#define UNWIND_HINT_TYPE_REGS_PARTIAL 2
#define UNWIND_HINT_TYPE_FUNC 3
#define UNWIND_HINT_TYPE_ENTRY 4
#define UNWIND_HINT_TYPE_SAVE 5
#define UNWIND_HINT_TYPE_RESTORE 6
#ifdef CONFIG_OBJTOOL
#include <asm/asm.h>
#ifndef __ASSEMBLY__
#define UNWIND_HINT(sp_reg, sp_offset, type, signal, end) \
"987: \n\t" \
".pushsection .discard.unwind_hints\n\t" \
/* struct unwind_hint */ \
".long 987b - .\n\t" \
".short " __stringify(sp_offset) "\n\t" \
".byte " __stringify(sp_reg) "\n\t" \
".byte " __stringify(type) "\n\t" \
".byte " __stringify(signal) "\n\t" \
".byte " __stringify(end) "\n\t" \
".balign 4 \n\t" \
".popsection\n\t"
/*
* This macro marks the given function's stack frame as "non-standard", which
* tells objtool to ignore the function when doing stack metadata validation.
* It should only be used in special cases where you're 100% sure it won't
* affect the reliability of frame pointers and kernel stack traces.
*
* For more information, see tools/objtool/Documentation/objtool.txt.
*/
#define STACK_FRAME_NON_STANDARD(func) \
static void __used __section(".discard.func_stack_frame_non_standard") \
*__func_stack_frame_non_standard_##func = func
/*
* STACK_FRAME_NON_STANDARD_FP() is a frame-pointer-specific function ignore
* for the case where a function is intentionally missing frame pointer setup,
* but otherwise needs objtool/ORC coverage when frame pointers are disabled.
*/
#ifdef CONFIG_FRAME_POINTER
#define STACK_FRAME_NON_STANDARD_FP(func) STACK_FRAME_NON_STANDARD(func)
#else
#define STACK_FRAME_NON_STANDARD_FP(func)
#endif
#define ANNOTATE_NOENDBR \
"986: \n\t" \
".pushsection .discard.noendbr\n\t" \
_ASM_PTR " 986b\n\t" \
".popsection\n\t"
#define ASM_REACHABLE \
"998:\n\t" \
".pushsection .discard.reachable\n\t" \
".long 998b - .\n\t" \
".popsection\n\t"
#else /* __ASSEMBLY__ */
/*
* This macro indicates that the following intra-function call is valid.
* Any non-annotated intra-function call will cause objtool to issue a warning.
*/
#define ANNOTATE_INTRA_FUNCTION_CALL \
999: \
.pushsection .discard.intra_function_calls; \
.long 999b; \
.popsection;
/*
* In asm, there are two kinds of code: normal C-type callable functions and
* the rest. The normal callable functions can be called by other code, and
* don't do anything unusual with the stack. Such normal callable functions
* are annotated with the ENTRY/ENDPROC macros. Most asm code falls in this
* category. In this case, no special debugging annotations are needed because
* objtool can automatically generate the ORC data for the ORC unwinder to read
* at runtime.
*
* Anything which doesn't fall into the above category, such as syscall and
* interrupt handlers, tends to not be called directly by other functions, and
* often does unusual non-C-function-type things with the stack pointer. Such
* code needs to be annotated such that objtool can understand it. The
* following CFI hint macros are for this type of code.
*
* These macros provide hints to objtool about the state of the stack at each
* instruction. Objtool starts from the hints and follows the code flow,
* making automatic CFI adjustments when it sees pushes and pops, filling out
* the debuginfo as necessary. It will also warn if it sees any
* inconsistencies.
*/
.macro UNWIND_HINT type:req sp_reg=0 sp_offset=0 signal=0 end=0
.Lunwind_hint_ip_\@:
.pushsection .discard.unwind_hints
/* struct unwind_hint */
.long .Lunwind_hint_ip_\@ - .
.short \sp_offset
.byte \sp_reg
.byte \type
.byte \signal
.byte \end
.balign 4
.popsection
.endm
.macro STACK_FRAME_NON_STANDARD func:req
.pushsection .discard.func_stack_frame_non_standard, "aw"
_ASM_PTR \func
.popsection
.endm
.macro STACK_FRAME_NON_STANDARD_FP func:req
#ifdef CONFIG_FRAME_POINTER
STACK_FRAME_NON_STANDARD \func
#endif
.endm
.macro ANNOTATE_NOENDBR
.Lhere_\@:
.pushsection .discard.noendbr
.quad .Lhere_\@
.popsection
.endm
.macro REACHABLE
.Lhere_\@:
.pushsection .discard.reachable
.long .Lhere_\@ - .
.popsection
.endm
#endif /* __ASSEMBLY__ */
#else /* !CONFIG_OBJTOOL */
#ifndef __ASSEMBLY__
#define UNWIND_HINT(sp_reg, sp_offset, type, signal, end) \
"\n\t"
#define STACK_FRAME_NON_STANDARD(func)
#define STACK_FRAME_NON_STANDARD_FP(func)
#define ANNOTATE_NOENDBR
#define ASM_REACHABLE
#else
#define ANNOTATE_INTRA_FUNCTION_CALL
.macro UNWIND_HINT type:req sp_reg=0 sp_offset=0 signal=0 end=0
.endm
.macro STACK_FRAME_NON_STANDARD func:req
.endm
.macro ANNOTATE_NOENDBR
.endm
.macro REACHABLE
.endm
#endif
#endif /* CONFIG_OBJTOOL */
#endif /* _LINUX_OBJTOOL_H */
tools/include/linux/objtool_types.h 0 → 100644
View file @ f7515d9f
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_OBJTOOL_TYPES_H
#define _LINUX_OBJTOOL_TYPES_H
#ifndef __ASSEMBLY__
#include <linux/types.h>
/*
* This struct is used by asm and inline asm code to manually annotate the
* location of registers on the stack.
*/
struct unwind_hint {
u32 ip;
s16 sp_offset;
u8 sp_reg;
u8 type;
u8 signal;
u8 end;
};
#endif /* __ASSEMBLY__ */
/*
* UNWIND_HINT_TYPE_CALL: Indicates that sp_reg+sp_offset resolves to PREV_SP
* (the caller's SP right before it made the call). Used for all callable
* functions, i.e. all C code and all callable asm functions.
*
* UNWIND_HINT_TYPE_REGS: Used in entry code to indicate that sp_reg+sp_offset
* points to a fully populated pt_regs from a syscall, interrupt, or exception.
*
* UNWIND_HINT_TYPE_REGS_PARTIAL: Used in entry code to indicate that
* sp_reg+sp_offset points to the iret return frame.
*
* UNWIND_HINT_FUNC: Generate the unwind metadata of a callable function.
* Useful for code which doesn't have an ELF function annotation.
*
* UNWIND_HINT_ENTRY: machine entry without stack, SYSCALL/SYSENTER etc.
*/
#define UNWIND_HINT_TYPE_CALL 0
#define UNWIND_HINT_TYPE_REGS 1
#define UNWIND_HINT_TYPE_REGS_PARTIAL 2
#define UNWIND_HINT_TYPE_FUNC 3
#define UNWIND_HINT_TYPE_ENTRY 4
#define UNWIND_HINT_TYPE_SAVE 5
#define UNWIND_HINT_TYPE_RESTORE 6
#endif /* _LINUX_OBJTOOL_TYPES_H */
tools/objtool/check.c
View file @ f7515d9f
......@@ -17,7 +17,7 @@
#include <objtool/warn.h>
#include <objtool/endianness.h>
#include <linux/objtool.h>
#include <linux/objtool_types.h>
#include <linux/hashtable.h>
#include <linux/kernel.h>
#include <linux/static_call_types.h>
......
tools/objtool/orc_dump.c
View file @ f7515d9f
......@@ -4,7 +4,7 @@
*/
#include <unistd.h>
#include <linux/objtool.h>
#include <linux/objtool_types.h>
#include <asm/orc_types.h>
#include <objtool/objtool.h>
#include <objtool/warn.h>
......
tools/objtool/orc_gen.c
View file @ f7515d9f
......@@ -6,7 +6,7 @@
#include <stdlib.h>
#include <string.h>
#include <linux/objtool.h>
#include <linux/objtool_types.h>
#include <asm/orc_types.h>
#include <objtool/check.h>
......
tools/objtool/sync-check.sh
View file @ f7515d9f
......@@ -6,7 +6,7 @@ if [ -z "$SRCARCH" ]; then
exit 1
fi
FILES="include/linux/objtool.h"
FILES="include/linux/objtool_types.h"
if [ "$SRCARCH" = "x86" ]; then
FILES="$FILES
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7