Commit f7885c84 authored by Dave Jiang's avatar Dave Jiang Committed by Dan Williams

isci: Removed special macros that does 64bit address math

These macros are not necessary. We can do 64bit math directly.
Signed-off-by: default avatarDave Jiang <dave.jiang@intel.com>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
parent b3824292
......@@ -85,45 +85,6 @@
#define sci_cb_make_physical_address(physical_addr, addr_upper, addr_lower) \
((physical_addr) = (addr_lower) | ((u64)addr_upper) << 32)
/**
* sci_physical_address_add() -
*
* This macro simply performs addition on an dma_addr_t type. The
* lower u32 value is "clipped" or "wrapped" back through 0. When this occurs
* the upper 32-bits are incremented by 1.
*/
#define sci_physical_address_add(physical_address, value) \
{ \
u32 lower = lower_32_bits((physical_address)); \
u32 upper = upper_32_bits((physical_address)); \
\
if (lower + (value) < lower) \
upper += 1; \
\
lower += (value); \
sci_cb_make_physical_address(physical_address, upper, lower); \
}
/**
* sci_physical_address_subtract() -
*
* This macro simply performs subtraction on an dma_addr_t type. The
* lower u32 value is "clipped" or "wrapped" back through 0. When this occurs
* the upper 32-bits are decremented by 1.
*/
#define sci_physical_address_subtract(physical_address, value) \
{ \
u32 lower = lower_32_bits((physical_address)); \
u32 upper = upper_32_bits((physical_address)); \
\
if (lower - (value) > lower) \
upper -= 1; \
\
lower -= (value); \
sci_cb_make_physical_address(physical_address, upper, lower); \
}
/**
* scic_word_copy_with_swap() - Copy the data from source to destination and
* swap the bytes during the copy.
......
......@@ -109,7 +109,7 @@ void scic_sds_unsolicited_frame_control_set_address_table_count(
static void scic_sds_unsolicited_frame_control_construct_frames(
struct scic_sds_unsolicited_frame_control *uf_control,
dma_addr_t uf_buffer_phys_address,
unsigned long uf_buffer_virt_address,
void *uf_buffer_virt_address,
u32 unused_uf_header_entries,
u32 used_uf_header_entries)
{
......@@ -118,7 +118,8 @@ static void scic_sds_unsolicited_frame_control_construct_frames(
/*
* Program the unused buffers into the UF address table and the
* controller's array of UFs. */
* controller's array of UFs.
*/
for (index = 0; index < unused_uf_header_entries; index++) {
uf = &uf_control->buffers.array[index];
......@@ -132,7 +133,8 @@ static void scic_sds_unsolicited_frame_control_construct_frames(
/*
* Program the actual used UF buffers into the UF address table and
* the controller's array of UFs. */
* the controller's array of UFs.
*/
for (index = unused_uf_header_entries;
index < unused_uf_header_entries + used_uf_header_entries;
index++) {
......@@ -140,17 +142,17 @@ static void scic_sds_unsolicited_frame_control_construct_frames(
uf_control->address_table.array[index] = uf_buffer_phys_address;
uf->buffer = (void *)uf_buffer_virt_address;
uf->buffer = uf_buffer_virt_address;
uf->header = &uf_control->headers.array[index];
uf->state = UNSOLICITED_FRAME_EMPTY;
/*
* Increment the address of the physical and virtual memory pointers
* Everything is aligned on 1k boundary with an increment of 1k */
* Increment the address of the physical and virtual memory
* pointers. Everything is aligned on 1k boundary with an
* increment of 1k.
*/
uf_buffer_virt_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
sci_physical_address_add(
uf_buffer_phys_address, SCU_UNSOLICITED_FRAME_BUFFER_SIZE
);
uf_buffer_phys_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
}
}
......@@ -177,6 +179,7 @@ void scic_sds_unsolicited_frame_control_construct(
u32 unused_uf_header_bytes;
u32 used_uf_header_bytes;
dma_addr_t uf_buffer_phys_address;
void *uf_buffer_virt_address;
/*
* Prepare all of the memory sizes for the UF headers, UF address
......@@ -193,9 +196,11 @@ void scic_sds_unsolicited_frame_control_construct(
/*
* The Unsolicited Frame buffers are set at the start of the UF
* memory descriptor entry. The headers and address table will be
* placed after the buffers. */
* memory descriptor entry. The headers and address table will be
* placed after the buffers.
*/
uf_buffer_phys_address = mde->physical_address;
uf_buffer_virt_address = mde->virtual_address;
/*
* Program the location of the UF header table into the SCU.
......@@ -205,34 +210,34 @@ void scic_sds_unsolicited_frame_control_construct(
* - Program unused header entries to overlap with the last
* unsolicited frame. The silicon will never DMA to these unused
* headers, since we program the UF address table pointers to
* NULL. */
uf_control->headers.physical_address = uf_buffer_phys_address;
sci_physical_address_add(
uf_control->headers.physical_address, used_uf_buffer_bytes);
sci_physical_address_subtract(
uf_control->headers.physical_address, unused_uf_header_bytes);
uf_control->headers.array
= (struct scu_unsolicited_frame_header *)
scic_cb_get_virtual_address(
controller, uf_control->headers.physical_address
);
* NULL.
*/
uf_control->headers.physical_address =
uf_buffer_phys_address +
used_uf_buffer_bytes -
unused_uf_header_bytes;
uf_control->headers.array =
uf_buffer_virt_address +
used_uf_buffer_bytes -
unused_uf_header_bytes;
/*
* Program the location of the UF address table into the SCU.
* Notes:
* - The address must align on a 64-bit boundary. Guaranteed to be on 64
* byte boundary already due to above programming headers being on a
* 64-bit boundary and headers are on a 64-bytes in size. */
uf_control->address_table.physical_address = uf_buffer_phys_address;
sci_physical_address_add(
uf_control->address_table.physical_address, used_uf_buffer_bytes);
sci_physical_address_add(
uf_control->address_table.physical_address, used_uf_header_bytes);
uf_control->address_table.array
= (dma_addr_t *)
scic_cb_get_virtual_address(
controller, uf_control->address_table.physical_address
);
* 64-bit boundary and headers are on a 64-bytes in size.
*/
uf_control->address_table.physical_address =
uf_buffer_phys_address +
used_uf_buffer_bytes +
used_uf_header_bytes;
uf_control->address_table.array =
uf_buffer_virt_address +
used_uf_buffer_bytes +
used_uf_header_bytes;
uf_control->get = 0;
......@@ -250,7 +255,7 @@ void scic_sds_unsolicited_frame_control_construct(
scic_sds_unsolicited_frame_control_construct_frames(
uf_control,
uf_buffer_phys_address,
(unsigned long)mde->virtual_address,
mde->virtual_address,
unused_uf_header_entries,
used_uf_header_entries
);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment